valutazioni - 3, GPA: 3.7
(
)
)
|
Facilità d'uso
Individual detector identification can be achieved by means of an optional address module. • A slot for connecting the Detector Zone Extension MGE8-1 is available for the extension to 16 conventional detector lines. • Dry relay outputs indicate the alarm and fault conditions on the control panel. In addition, 16 open-collector outputs, two auxiliary inputs, and an additional relay output are available for general applications. • Up to 8 alarming devices can be operated as evacuation circuits directly via the expanded keypad of the fire detection control panel. • The optional Fire Brigade Interface FWI016-1 allows for the connection of two independent transmitting devices for a direct interconnection to a designated alarm respondent (e.g., the fire brigade) as well as for the connection of a country-specific fire brigade control unit. • Outputs with open parameters and logical combinations of detector zones for the activation of external controls and alarming devices allow for a maximum of flexibility. Thus, no additional expenses arise for external relays, logic gates or timers. Using these individual combinations of different types of detectors, even fire protection strategies under the most difficult circumstances can be combined into a reasonable concept. • The LC text display shows all present events with date and time. This allows for quick and targeted reaction in the event of a fire as well as for easy maintenance. • An event memory allows for the display of the latest 200 events at any time, including all required information. Thus, all system conditions and user operations that occurred are documented in a clearly laid out way. • A possible breakdown of the central processing board is securely detected and displayed by the system. • The processor-monitored power supply ensures permanent surveillance and charging of the batteries. This way, even during a power failure the untroubled and uninterrupted operation (for more than 72 hours depending on the design) is guaranteed. • Three hierarchized authorization levels for operation and parameterisation facilitate a high degree of security against unauthorized access. • The control panel is easily operated menu-driven via the display and operating field. Clear instructions on the display guide the user during commissioning, operation and maintenance. • The parameter data can be entered either via the display and operating field or, in a more comfortable way, created by means of the PC software PARSOFT-1 and loaded into the control panel. Thus, a quick and efficient transfer of the system configuration into the control panel is guaranteed. • After activation, the control panel is immediately ready for operation due to the practical factory setting. This guarantees easy and time-saving commissioning. The extremely flat wall mount cabinet allows for an easy mounting in virtually any place of the building. Thanks to its modern, ageless design, architectural requirements and demands of the respective regulations are ideally combined. The compact design allows for the accommodation of the optional Detector Zone Extension, the Fire Brigade Interface, the Serial Interface Module, up to 3 auxiliary modules (e.g., relay module, siren connection module) and batteries up to 22Ah apart from the central processing board in the standard case. Series BC016 thus stands for modularity and easy expansion. This product complies with all relevant standards of EN 54 and is VdS-certified. In addition, the product also holds several country-specific approvals and certificates. LST‘s high quality level is secured by a permanently monitored quality management system certified by ISO 9001. Building Safety. Building Security. A © LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27 BC016-2_DBL_LST_EN_0804.PDF • PAGE 2 OFFICE@LST.AT • WWW.LST.AT • ALL RIGHTS RESERVED Permanent Connection Permanent Connection A variety of peripheral devices can be connected to the fire detection control panel BC016-2: • Fire brigade key safe • Actuations • Fire brigade control unit • Modules for remote parameterisation and remote • Acoustic and optical signaling devices maintenance via computer newtork, modem or GSM • External protocol printer connection • Remote indication unit – and much more. Specifications Mains voltage 230VAC +10/-15%, 50Hz Output/nominal voltage typ. 28VDC Output peak current max. 1.8A Own current consumption at 24V typ. 70mA (without optional componentries) Ambient temperature -5°C to +50°C Relative humidity 95% (no condensation) Dimensions W . H . D 380 . 480 . 83 (mm) Colour gray-white, RAL 9002 Weight without accumulator approx. 5kg Approvals (EN 54-2, EN 54-4) VdS G205023 FT 14/439/04 (Austria), Part No. 210122 Order name Fire and Evacuation Panel BC016-2/INT1 Building Safety. Building Security. A © LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27...