valutazioni - 1, GPA: 4
(
)
)
|
Facilità d'uso
ND2C0104 E Enter the number of copy sets with the number keys. F Set your originals. When setting a stack of originals in the document feeder A Set a stack of originals in the document feeder, then press the {Start} key. After all the originals are scanned, the copies are delivered to the tray. Note . The last page should be on the bottom. When setting an original on the exposure glass A Set an original on the exposure glass, then press the {Start} key. Note . Start with the first page to be copied. B Set the next original. Note . Set the original in the same direction as the first one. C After all originals are scanned, press the {#}key. The copies are delivered to the tray. When setting a stack of originals in the document feeder in SADF mode Reference . P.31 “SADF mode” A Set an original in the document feeder, then press the {Start} key. Note . Start with the first page to be copied. Copying B Set the next original. C After all originals are scanned, press the {#}key. The copies are delivered to the tray. To stop scanning When you are using the Sort, Stack, or Staple function, the originals are scanned into memory. A Press the {Clear/Stop}key. To resume scanning A Press the [No] key. Scanning is resumed. ND2C0103 Note . Scanned images in memory are not cleared. To clear scanned images of the originals A Press the [Yes] key. Scanning is stopped with the images cleared. When memory reaches 0% Scanning will be stopped if the size of scanned image data exceeds memory capacity. Note . There is enough memory to store approximate 100 ~ 400 originals of A4 size. The number of originals that can be stored in memory varies depending on the memory setting and types of the original. Reference Scanning will stop when memory reaches 0% during sorted copying. However, you can change this setting so that all the scanned pages are copied and delivered to the tray first, then the machine automatically continues scanning the remaining originals. See “8. Mem.full-AutoStrt” in . P.155 “3. Input/Output 2/2”. A Press the {Start}key. The scanned pages are delivered to the tray. Then, the image data in memory is cleared. B Remove the copies and continue copying by following the instructions on the display. ND2C0104 Copying from the Bypass Tray Copying from the Bypass Tray Use the bypass tray to copy onto OHP transparencies, adhesive labels, translucent paper, post cards, and copy paper that cannot be set in the paper tray. Limitation . You cannot use the bypass tray for the Duplex function. Note . The machine can automatically detect the following sizes as standard size copy paper: Metric version A3L, A4L, A5L, 81/2 " . 13"L Inch version A3L, 11" . 17"L, 81/2 " . 14"L, 81/2 " . 11"L, 51/2 " . 81/2 " L . If you do not use the standard size copy paper, you should input vertical and horizontal dimensions. The sizes that you can input are as follows: Metric version • Vertical: 100 – 297mm • Horizontal: 148 – 432mm Inch version • Vertical: 4.0" – 11.7" • Horizontal: 6.0" – 17.0" B Open the bypass tray. ND6H0300 C Adjust the guides to the copy paper size. Important . If the guides are not flush with the copy paper, a skew image or paper misfeeds might occur. D Lightly insert the copy paper face down until the beeper sounds. The k indicator on the display is automatically selected. 3 2 4 1 ND6H04EE Reference 1: Horizontal size For details about paper capacity of 2: Vertical size the bypass tray, see . P.23 “Copy Paper”. 3: Extender 4: Paper guide A If Duplex mode is selected, press the {Duplex} key to cancel the mode. Copying Note . Do not stack paper over the limit mark; otherwise a skew image or paper misfeeds might occur. . If the beeper is turned off, lightly insert the copy paper until it stops. See “Settings You Can Change With The User Tools” in the System Settings. . When the platen cover is open, set the direction of the copy paper to L. . Swing out the extender to support larger size copy paper (larger than A4L, 81/2" . 11"L. . Fan paper to get air between the sheets and avoid a multi-sheet feed. When copying onto non-standard size copy paper Important . You should specify the size of copy paper to avoid paper misfeeds. A Make sure the k indicator is selected. B Press the {#}key. C Press the [Ppr. Size] key. D Press the [OK] key. ND2C0104 E Enter the vertical size of the paper with the number keys, then press the {#}key. Note . To change the number entered, press the {Clear/Stop} key and enter the new number. F Enter the horizontal size of the paper with the number keys, then press the [OK] key. ND2C0104 Note . To change the number entered, press the {Clear/Stop} key and enter the new number. . When you specify the paper size, ! appears on the display to indicate bypass tray copying. ND2C0101 Copying from the Bypass Tray G Press the [Exit] key. C Press the [Ppr. Size] key. ND2C0104 Note . When copying onto OHP transparencies or thick paper. . P.54 “When copying onto OHP transparencies or thick paper” When copying onto standa...
Questo manuale è adatto anche per i modelli :Stampanti - 350e (3.57 mb)