valutazioni - 0, GPA: 5
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
. designed for your machine. Imaging unit is not The imaging unit isInstall the imaging unit. installed. Install it not installed, or the CRUM (Consumer Replaceable UnitMonitor) in the cartridge is not connected. If it is already installed, try to reinstall theimaging unit. If the problem persists, please call for service. Replace with new The imaging unit is atReplace a imaging unit imaging unit the end of its life. with a Samsung- When the imaging unit genuine imaging unit. replacement message(See "In the multi- appears on the screen purpose tray" on and if you select page96) Continue, this message displays. LSU error: [zzz]. There is a problem inTurn the machine off Please turn off then the control of LSU and turn it on again. If on unit. the problem persists, please call for service. Motor does not operate: [zzz]. Please turn off then on There is a problem inthe control of motor unit. Turn the machine off and turn it on again. If the problem persists, please call for service. Original paper does The lead edge of theOpen the DADF cover not feed in scanner document failed to actuate the scan sensor within the correct time after actuating the registration sensor. and remove jammedoriginal. (See "In themulti-purpose tray" onpage96) MESSAGE MEANING SUGGESTED SOLUTIONS Original paper is tooOversized document Open the DADF cover long for scanner.or double-feeding of and remove the Check size originals. jammed original. (See"In the multi-purpose tray" on page96) Check the document size whether it is supported. (See "In the multi-purpose tray" on page96) Original paper jam The originals are Open the DADF cover in front of scanner jammed in DADF. and remove the jammed original. (See"In the multi-purpose tray" on page96) Original paper jam in front of scanner duplex path Paper has jammedduring duplex printing in the DADF. Clear the jam. (See "In the multi-purpose tray" on page96) Original paper jam The lead edge of theOpen the DADF cover inside of scanner document failed to actuate the gatesensor within the correct time after actuating the scan sensor. When the machine is on, jammed paper isdetected in the DADF. and remove the jammed original. (See"In the multi-purpose tray" on page96) Original paper jam The lead edge of theLift up the document while reversing document failed to input tray and remove paper in scanner actuate the duplex sensor within the correct time when the document was fed the wrong way. the jammed original. (See "In the multipurpose tray" on page96) Paper jam at exit offinisher Paper jammed in the stacker exit part. Pull jammed paper from the stacker exit. Paper Jam at the bottom of duplexpath Paper has jammedduring duplex printing. Clear the jam. (See "In the multi-purpose tray" on page96) Paper Jam at the top of duplex path Paper Jam in exit area Paper has jammed inthe fuser area. Clear the jam. (See "In the multi-purpose tray" on page96) Paper jam in front offinisher Paper jammed in the stacker. Open the stacker door and remove jammed paper by lowering guide 1a or 1b. Paper jam insidefinisher Paper Jam in MP tray Paper Misfed from multi-purpose tray Clear the jam. (See "In the multi-purpose tray" on page96) 98 MESSAGE MEANING SUGGESTED SOLUTIONS Paper Jam in tray 1 Paper Jam in tray 2 Paper Jam in tray 2 (HCF) Paper misfed from tray Or paper has jammedin the tray feed area. Or the tray cover is opened. Clear the jam. (See "Inthe tray 1" on page 91 and see "In the optional tray" on page 92 and see "In the optionalhigh capacityfeeder" on page 93) Paper Jam in tray 3 Paper Jam in tray 3 (HCF) Paper Jam in tray 4 Paper jam inside Paper jammed in theOpen the stacker door finisher’s duplex stacker. and remove jammedpaper by loweringguide 1a or 1b. Paper Jam inside ofduplex path Paper has jammedduring duplex printing. Clear the jam. (See "Inthe multi-purpose tray" on page96) Paper Jam inside ofmachine Paper has jammed inthe registration area. Clear the jam. (See "Inthe multi-purpose tray" on page96) Scanner locking The CCD (Charged Unlock the CCD lock. switch is locked or Couple Device) lock (See "In the multi- another problem has been locked. The purpose tray" on occurred CCD does not detect its home location or move. page96) Or turn off the machine and on again. Try again. If the problem persists, call for service. Shake toner The toner supply is Thoroughly roll the new cartridge low. cartridge five or six times to distribute the toner evenly inside the cartridge. Staple cartridge is Stapler is run out. Order Staple Cartridge. empty. Replace it (See "In the multipurpose tray" on page96) And replace it. (See "In the multipurpose tray" on page96) Staple cartridge is The staple cartridge is Install the staple not installed. Install not installed. cartridge following the it in finisher steps explained on the back of the finisher door. (See "In the multipurpose tray" on page96) If you want tocontinue the print job and disregard of this error message, go toAdmin Setting to adjust the option. (See "In t...
Questo manuale è adatto anche per i modelli :Stampanti - SCX-6555N (13.04 mb)
Stampanti - SCX-6555N/CAS (13.04 mb)
Stampanti - SCX-6555N/KRA (13.04 mb)
Stampanti - SCX-6555N/KRC (13.04 mb)