valutazioni - 4, GPA: 4.3
(
)
)
|
Foto e specifiche Samsung ML-1865W |
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
Selecting inappropriate media can result in poor print quality. •Plain: Normal plain paper. Select this type if your printing on 60 to 120 g/m2 (16 to 32 lbs). •Thick: 90 to 163 g/m2 (24 to 43 lbs) thick paper. •Thin: 60 to 70 g/m2 (16 to 19 lbs) thin paper. •Cotton: 75 to 90 g/m2 (20 to 24 lbs) cotton paper. •Color: 75 to 90 g/m2 (20 to 24 lbs) color-back grounded paper. •Preprinted: 75 to 90 g/m2 (20 to 24 lbs) preprinted/letterhead paper. •Recycled: 60 to 90 g/m2 (16 to 24 lbs) recycled paper. When you use recycled paper, printouts might be wrinkled and/or jamming may occur due to excessive curl. •CardStock: 105 to 163 g/m2 (28 to 43 lbs) cardstock. •Envelope: 75 to 90 g/m2 (20 to 24 lbs) envelope. •Transparency: 138 to 146 g/m2 (37 to 39 lbs) transparency paper. •Labels: 120 to 150 g/m2 (32 to 40 lbs) labels. •Bond: 105 to 120 g/m2 (28 to 32 lbs) bond. •Archive: 70 to 90 g/m2 (19 to 24 lbs) If you need to keep the print-out for a long time, such as for archives. Envelopes Successful printing on envelopes depends upon the quality of the envelopes. To print on an envelope, the stamp area should be on the left side and the end of the envelope with the stamp area should enter the printer first in the center of the tray. •When selecting envelopes, consider the following factors: -Weight: The weight of the envelope paper should not exceed 90 g/m2 otherwise, jams may occur. -Construction: Prior to printing, envelopes should lie flat with less than 6 mm ( 0.24 inch.) of curl, and should not contain air. -Condition: Envelopes should not be wrinkled, nicked, nor damaged. -Temperature: Use envelopes that are compatible with the heat and pressure of the machine during operation. •Use only well-constructed envelopes with sharp-and well-creased folds. •Do not use stamped envelopes. •Do not use envelopes with clasps, snaps, windows, coated lining, self-adhesive seals, or other synthetic materials. •Do not use damaged or poorly made envelopes. •Be sure the seam at both ends of the envelope extends all the way to the corner of the envelope. 1 Acceptable 2 Unacceptable •Envelopes with a peel-off adhesive strip or with more than one flap that folds over to seal must use adhesives compatible with the machine’s fusing temperature about 170°C (338 °F) for 0.1 second. The extra flaps and strips might cause wrinkling, creasing, or jams, and may even damage the fuser. •For the best print quality, position margins no closer than 15 mm ( 0.59 inch.) from the edges of the envelope. •Avoid printing over the area where the envelope’s seams meet. Transparencies To avoid damaging the machine, use only transparencies designed for laser printers. •Transparencies used in the machine must be able to withstand machine’s fusing temperature. •Place them on a flat surface after removing them from the machine. •Do not leave unused transparencies on the paper tray for long periods of time. Dust and dirt may accumulate on them, resulting in spotty printing. •To avoid smudging caused by fingerprints, handle transparencies carefully. •To avoid fading, do not expose printed transparencies to prolonged sunlight. •Ensure that transparencies are not wrinkled, curled, or have any torn edges. •Do not use transparencies that separate from the backing sheet. •To prevent transparencies from sticking to each other, do not let the printed sheets stack up as they are begin printed out. Labels To avoid damaging the machine, use only labels designed for laser machines. •When selecting labels, consider the following factors: -Adhesives: The adhesive material should be stable at your machine’s fusing temperature (about 170°C (338 °F)). -Arrangement: Only use labels with no exposed backing between them. Labels can peel off sheets that have spaces between the labels, causing serious jams. -Curl: Prior to printing, labels must lie flat with no more than 13 mm (0.51 inch.) of curl in any direction. -Condition: Do not use labels with wrinkles, bubbles, or other indications of separation. •Make sure that there is no exposed adhesive material between labels. Exposed areas can cause labels to peel off during printing, which can cause paper jams. Exposed adhesive can also cause damage to machine components. •Do not run a sheet of labels through the machine more than once. The adhesive backing is designed for only a single pass through the machine. •Do not use labels that are separating from the backing sheet or are wrinkled, bubbled, or otherwise damaged. Card stock/Custom-sized paper Postcards, cards and other custom-sized materials can be printed with this machine. •Do not print on media smaller than 76 mm (3.00 inches) wide or 183 mm (7.20 inches) long. •In software applications, set the margins at least 6.4 mm (0.25 inches) away from the edges of the material. Letterhead/Preprinted paper Single-sided Double-sided Face up Face down •Letterhead/ Preprinted paper must be printed with heat-resistant ink that will not melt, vaporize, or release hazardous emissions when sub...
Questo manuale è adatto anche per i modelli :Stampanti - ML-1860 (4.94 mb)
Stampanti - ML-1861 (4.94 mb)
Stampanti - ML-1861K (4.94 mb)
Stampanti - ML-1864K (4.94 mb)