Log:
valutazioni - 2, GPA: 4.5 ( )

Istruzioni per l'uso Samsung, Modello ML-2162W

Produttore : Samsung
File Size : 5.92 mb
File Nome :
Lingua di insegnamento: en
Vai a scaricare



da questo dispositivo ha anche altre istruzioni :
Stampanti - ML-2162W (834.04 kb)

Facilità d'uso


• Download this program from SetIP This utility program allows you to select a network interface and manually configure the IP addresses for use with the TCP/IP protocol. • See "IPv4 configuration using SetIP (Windows)" on page 90. • See "IPv4 configuration using SetIP (Macintosh)" on page 91. • See "IPv4 configuation using SetIP (Linux)" on page 92. • The machine that does not support the network interface, it will not be able to use this feature (see "Rear view" on page 17). • TCP/IPv6 is not supported by this program. 2. Using a network-connected machine 89 Wired network setup You must set up the network protocols on your machine to use it on your network. You can use network after connecting network cable to a corresponding port on your machine. • For models that do not have the display screen on the control panel, use the SyncThru™ Web Service or SetIP program. -See "Using SyncThru™ Web Service" on page 161. -See "Setting IP address" on page 90. • For models that have the display screen on the control panel, configure the network setting by pressing (Menu) button > Network on the control panel. Printing a network configuration report You can print Network Configuration Report from the machine’s control panel that will show the current machine’s network settings. This will help you to set up a network. • The machine has the display screen: Press the (Menu) button on the control panel and select Network > Network Config. (Network Configuration)> Yes. • The machine does not have the display screen: Press the (Cancel or Stop/Clear) button for more than five seconds on the control panel. • The machine without the (Cancel or Stop/Clear) button: Press the (WPS) button formore than ten seconds on the control panel. Using this Network Configuration Report, you can find your machine’s MAC address and IP address. For example: • MAC Address: 00:15:99:41:A2:78 • IP Address: 165.254.192.192 Setting IP address • The machine that does not support the network interface, it will not be able to use this feature (see "Rear view" on page 17) • TCP/IPv6 is not supported by this program. First, you have to set up an IP address for network printing and managements. In most cases a new IP address will be automatically assigned by a DHCP (Dynamic Host Configuration Protocol) server located on the network. IPv4 configuration using SetIP (Windows) Before using the SetIP program, disable the computer firewall from Control Panel > Security Center > Windows Firewall. 2. Using a network-connected machine 90 Wired network setup Install this program from the supplied CD-ROM by double-click 1 Application > SetIP > Setup.exe. Follow the instructions in the installation window. 2 Connect your machine to the network with a network cable. 3 Turn on the machine. 4 From the Windows Start menu, select All Programs > Samsung 5 Printers > SetIP > SetIP. Click the icon (third from left) in the SetIP window to open the TCP/IP 6 configuration window. Enter the machine’s new information into the configuration window as 7 follows. In a corporate intranet, you may need to have this information assigned by a network manager before proceeding. Find the machine’s MAC address from the Network Configuration Report (see "Printing a network configuration report" on page 90) and enter it without the colons. For example, 00:15:99:29:51:A8 becomes 0015992951A8. Click Apply, and then click OK. The machine will automatically print the 8 Network Configuration Report. Confirm that all the settings are correct. IPv4 configuration using SetIP (Macintosh) Before using the SetIP program, disable the computer firewall from System Preferences > Security > Firewall. The following instructions may differ for your model. Connect your machine to the network with a network cable. 1 Insert the Installation CD-ROM, and open the disk window, select 2 MAC_Installer > MAC_Printer > SetIP > SetIPapplet.html. Double-click the file and Safari will automatically open, then select 3 Trust. The browser will open the SetIPapplet.html page that shows the printer’s name and IP address information. 2. Using a network-connected machine 91 Wired network setup Wired network setup 4 Click the icon (third from left) in the SetIP window to open the TCP/ IP configuration window. 3 Click to open the TCP/IP configuration window. 5 Enter the machine’s new information into the configuration window. In a corporate intranet, you may need to have this information assigned by 4 Enter the machine’s new information into the configuration window. In a corporate intranet, you may need to have this information assigned by a network manager before proceeding. a network manager before proceeding. Find the machine’s MAC address from the Network Configuration Report Find the machine’s MAC address from the Network Configuration Report (see "Printing a network configuration report" on page 90) and enter it (see "Printing a network configuration report" on page 90) and enter it wit...

Questo manuale è adatto anche per i modelli :
Stampanti - ML-2160 (5.92 mb)
Stampanti - ML-2160/STS (5.92 mb)
Stampanti - ML-2160/XAX (5.92 mb)
Stampanti - ML-2160/XAZ (5.92 mb)

Scrivi la tua opinione del dispositivo



Il messaggio
Il tuo nome :
Inserire le due cifre :
capcha





categorie