valutazioni - 3, GPA: 4
(
)
)
|
Facilità d'uso
If your computer is set to DHCP and you want to use the Static wireless network setting, you must contact the network administrator to get the static IP address. • For the DHCP method If the IP address assignment method is DHCP, check if DHCP is shown in the Wireless Network Setting Confirm window. If it shows Static, click Change TCP/IP to change the assignment method to Receive IP address automatically (DHCP). • For the Static method If the IP address assignment method is Static, check if Static is shown in the Wireless Network Setting Confirm window. If it shows DHCP, click Change TCP/IP to enter the IP address and other network configuration values for the machine. For example: If the computer’s network information is as shown follows: -IP address: 169.254.133.42 -Subnet Mask: 255.255.0.0 Then, the machine’s network information should be as below: -Subnet Mask: 255.255.0.0 (Use the computer’s subnet mask.) -Gateway: 169.254.133.1 9 9 When the wireless network settings are completed, disconnect the USB cable between the computer and machine. Click Next. If the Change PC Network Setting window appears, follow the steps in the window. Click Next if you are finished with the computer’s wireless network settings. If you set the computer’s wireless network on DHCP, it will take several minutes to receive the IP address. 10 10 The Wireless Network Setting Complete window appears. Select Yes if you accept the current settings and continue the setup procedure. Select No if you want to return to the beginning screen. Then, click Next. 11 11 Click Next when the Confirm Printer Connection window appears. Wireless network setup 452. Using a network-connected machine 12 Select the components to be installed. Click Next. .... 17 Setup using Macintosh 452. Using a network-connected machine 12 Select the components to be installed. Click Next. .... 17 Setup using Macintosh After selecting the components, you can also change the machine name, set the machine to be shared on the network, set the machine as the default machine, and change the port name of each machine. Click Next. 13 13 After the installation is finished, a window asking you to print a test page appears. If you want to print a test page, click Print a test page. Otherwise, just click Next and go to step 15. 14 14 If the test page prints out correctly, click Yes. If not, click No to reprint it. 15 15 To register as a user of the machine in order to receive information from Samsung, click On-line Registration. 16 16 Click Finish. Items to prepare •Access point • Network-connected computer • Software CD that was provided with your machine • The machine installed with a wireless network interface •USB cable Access point via USB cable 1 1 Check whether the USB cable is connected to the machine. 2 2 Turn on your computer, access point, and machine. 3 3 Insert the supplied software CD into your CD-ROM drive. 4 4 Double-click the CD-ROM icon that appears on your 5 5 Macintosh desktop. Double-click the MAC_Installer folder. 6 6 Double-click the Installer OS X icon. Wireless network setup 462. Using a network-connected machine 7 Click Continue. 8 Read the license agreement and click Continue. When you set the wireless configuration manually, click Advanced Setting. 462. Using a network-connected machine 7 Click Continue. 8 Read the license agreement and click Continue. When you set the wireless configuration manually, click Advanced Setting. 9 9 Click Agree to agree to the license agreement. 10 10 When the message that warns that all applications will close on your computer appears, click Continue. 11 11 Select the Wireless Network Setting. 12 12 The software searches the wireless network. If the search has failed, you may check if the USB cable is connected between the computer and machine properly, and follow the instructions in the window. 13 13 After searching, the window shows the wireless network devices. Select the name (SSID) of the access point you are using and click Next. • Enter the wireless Network Name: Enter the SSID of the access point you want with (SSID is case-sensitive). • Operation Mode: Select Infrastructure. • Authentication: Select an authentication type. Open System: Authentication is not used, and encryption may or may not be used, depending on the need for data security. Shared Key: Authentication is used. A device that has a proper WEP key can access the network. WPA Personal or WPA2 Personal: Select this option to authenticate the print server based on WPA Pre-Shared Key. This uses a shared secret key (generally called Pre- Shared Key pass phrase) that is manually configured on the access point and each of its clients. • Encryption: Select the encryption. (None, WEP64, WEP128, TKIP, AES, TKIP, AES) • Network Key: Enter the encryption network key value. • Confirm Network Key: Confirm the encryption network key value. • WEP Key Index: If you are using WEP Encryption, select the appropriate WEP Key Index. Wireless network setup The wireless...
Questo manuale è adatto anche per i modelli :Stampanti - ML-2950D (10.94 mb)
Stampanti - ML-2950DR (10.94 mb)
Stampanti - ML-2950ND (10.94 mb)
Stampanti - ML-2950ND/GOV (10.94 mb)