If you select Auto, the printer selects the operation mode automatically, according to the network cable’s connection each time it boots up. Note In Ad-Hoc mode, even if the network cable is connected, your printer will use the wireless interface. • Channel: This option is available only in the Ad-Hoc mode. In most cases, you will not need to change this setting. The printer will scan all available channels for the specified network and will adapt its channel to the one detected. 6 When you have finished, press Stop to return to Standby mode. 10.3 Selecting the authentication type Authentication is a process of identifying the legitimacy of an user to access a network. You can select whether or not authentication is used. 1 Press Menu until Network appears on the bottom line of the display and press OK. 2 Press the scroll buttons until Wireless appears and press OK. 3 Press the scroll buttons until WLAN Security appears and press OK. 4 Press the scroll buttons until Static WEP appears and press OK. 5 Press the scroll buttons until Authentication appears and press OK. 6 Press the scroll buttons to select the type you want. • Open System: Authentication is not used. • Shared Key: Authentication is used. 7 Press OK to save your selection. 8 Press Stop to return to Standby mode. Setting Encryption If your network uses WEP encryption keys, you can must select the appropriate encryption type and configure encryption keys. You can configure up to four keys. The active key must match the key value and key position (for example, Key 1) configured on other wireless devices in the network. 1 Press Menu until Network appears on the bottom line of the display and press OK. 2 Press the scroll buttons until Wireless appears and press OK. 3 Press the scroll buttons until WLAN Security appears and press OK. 4 Press the scroll buttons until Static WEP appears and press OK. 5 Press the scroll buttons until Encryption appears and press OK. Note If you have set the authentication type to Open System, the Encryption menu does not display. 6 Set each encryption option and press OK. • Encrypt. Type: Select an encryption type: • Key Type: Select the key type of your network. • Using Key: Select the key to be used in your network. • Edit Key: Enter the key number for the selected key position. The numbers you can enter as follows: Hexadecimal Alphanumeric 128-bit WEP 26 digits 13 characters 7 When you have finished, press Stop to return to Standby mode. Restoring default values for wireless networking If the problem occurrs when you use or set up the wireless network values, take following stops to restore factory default values. Generally, factory values of wireless networking are optimized for your printer. 1 Press Menu until Network appears on the bottom line of the display and press OK. 2 Press the scroll buttons until Wireless appears and press OK. 3 Press the scroll buttons until WLAN Default appears and press OK. 4 When Restore appears on the bottom line of the display, press OK. The printer starts restoring the default values. Hexadecimal Alphanumeric 64-bit WEP 10 digits 5 characters 10.4 Item Specifications and Description Model name ML-3470D, ML-3471ND Printing speeda 33 ppm (A4); 35 ppm (Letter) Duplex: 17 ipm (A4); 18 ipm (Letter) Resolution Up to 1200 x 1200 dpi effective output Warm-up time Less than 15 seconds First print out time Standby mode: As fast as 8 seconds Sleep mode: 25 seconds Power rating 110 - 127 VAC or 220 - 240 VAC See the Rating label on the machine for the correct voltage, frequency(hertz) and type of current for your machine. Power consumption Printing mode: 600 W Power save mode: Less than 10 W Noise levelb Standby mode: Less than 26 dBA Printing mode: Less than 52 dBA Toner cartridge lifec • Starter toner cartridge: 4,000 pagesd • Standard: 4,000 pages • High yield: 10,000 pages (Declared yield value in accordance with ISO/IEC 19752) Weight Gross: 15.5 Kg / Net: 12.2 Kg(including consumables) Package weight Paper: 2.5 Kg, Plastic: 0.6 Kg External dimensions (W x D x H) 400 x 433.4 x 285 mm (15.75 x 17.1 x 11.2 inches) Operating environment Temperature: 10 ~ 32° C (50 ~ 90° F) Humidity: 20 ~ 80% RH Printer language PCL 6e, PostScript 3, IBM ProPrinter, EPSON, SPL 11 Specifications This chapter includes: • Printer specifications Printer specifications Item Specifications and Description Memory ML-3470D 32MB (Max 288 MB) ML-3471ND 64 MB (Max 320 MB) 32, 64, 128, or 256 MB optional memory available. Use only the Samsung-approved DIMM. Fonts 1 bitmap, 45 scalable, 136 PostScript3 fonts Interface • IEEE 1284 Bidirectional Parallel Standard - Modes supported: Compatible, Nibble, Byte, ECP • USB Interface Standard - USB 2.0 compliant - 480 Mbps 1 port • Network Interface ML-3471ND: 10/100 Base TX OS compatibilityf • Windows 2000/XP/2003/2008/Vista/7/Server 2008 R2 • Various Linux OS. • Mac 8.6 ~ 9.2/10.1 ~ 10.6 Options ML-3470D 250-sheet tray ML-3471ND 25...
)
