valutazioni - 3, GPA: 4
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
Set Up the Machine Do You Have Everything? Manuals for the Machine . Starter Guide (This Document): Machine set-up and software installation . Easy Operation Guide: Quick reference for basic operations . Reference Guide: Basic operations and troubleshooting . Copying Guide: Copying instructions . Sending Guide: Sending instructions . Facsimile Guide: Fax instructions . Network Quick Start Guide: Setting up the network connection and installing the CD-ROM software . Remote UI Guide: Remote user interface instructions . Network Guide: Network connectivity and setup instructions . PCL/UFR II Printer Guide: PCL/UFR II printer instructions . PCL Driver Guide: PCL printer driver installation and instructions . UFR II Driver Guide: UFR II printer driver installation and instructions . Fax Driver Guide: Fax driver installation and instructions Assistance: If you have a problem with your machine and you cannot solve it by referring to the manuals listed above, please contact our Canon Authorized Service Facilities or the Canon Customer Care Center at 1-800- 828-4040 between the hours of 8:00 A.M. to 8:00 P.M. EST Monday through Friday and 10:00 A.M. to 8:00 P.M. on Saturday. Before Setting Up the Machine . Remove all shipping tape on the machine. . When carrying the machine, be sure that it is carried by two or more people holding the parts indicated below. . The machine illustration may differ slightly from your machine. .Machine .Cartridge .Starter Guide .Easy Operation Guide .Reference Guide .Copying Guide .Sending Guide .Facsimile Guide .Network Quick Start Guide .User Software CD (2 CDs) .User Manual CD .Limited Warranty Notice .Cartridge Warranty Notice .Registration Card .Ferrite Core for USB Cable .Ferrite Core for LAN Cable .Document Size Label .Paper Size Label .Stamp Cartridge .Tweezers .Power Cord .Telephone Cable 1 2 3 Install Cartridge 1 Remove the cartridge from the bag. Keep the bag for future use. 2 Remove the short shipping tape. 3 Remove the packing materials. 4 Gently rock the cartridge several times to distribute toner inside. 5 Pull out the seal completely. NOTE Do not pull out the seal at an angle. 6 Remove the long shipping tape. 7 Remove the protective cover. 8 Push the release button on the left cover of the main unit to open the left cover. 9 Open the front cover. 10 Rotate the unlock lever until it clicks. 11 While grasping the handle of the cartridge holder, pull the cartridge holder out of the machine until it stops. 12 Hold the cartridge by its handle, then insert it into the cartridge holder. 4 5 13 Push the cartridge holder into the machine as far as it will go. 14 Rotate the lever to the locked position. 15 Close the front cover. NOTE Be careful not to get your fingers caught. 16 Gently close the left cover until it clicks. NOTE Be careful not to get your fingers caught. Load Paper 1 Pull out the paper drawer until it stops. 2 Fan the paper stack and even the edges. 3 Push down the metal plate to lock. 4 Insert the paper stack print side up. NOTE If loading paper other than Letter, see Chapter 6, “Routine Maintenance,” in the Reference Guide. NOTE Make sure the paper stack does not exceed the load limit mark (A) and it is loaded under the hooks (B) on the paper guides. 5 Push the paper drawer into the machine as far as it will go. NOTE – Be careful not to get your fingers caught. – For loading paper in the stack bypass, see Chapter 2, “Basic Operations,” in the Reference Guide. A B B 6 Connneecctt TTeelephoonee Cabbles AAffffiixx LLaabbeellss Connect the supplied telephone cable (A) to the line jack (B) and the wall jack. B A 1 Affix the supplied document size label to the specified location. AB Align the slide guide (A) to the document size mark “A4/A3” (B). A4 A3 BA BC Affix the document size label (A) to the feeder cover so that both indicators (B and C) on the side guide and the document size label are aligned properly, as shown on the right. 78 Connect Power Cord Connect Power Cord 1 Connect the supplied power cord (A) into the socket and the wall outlet. A 2 Press the main power switch to ON (“I” side). The Start Up screen is displayed until the machine comes to the ready mode. The Basic Features screen is displayed when the machine is ready to scan. What if... .