valutazioni - 4, GPA: 3.5
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
The printhead holder automatically moves to the center. Remove the protective tape. Write down the serial number located to the right of the printhead. You will need this later to register the product. 3 4 5 1 Remove the shipping tape from the front and sides of the printer. 2 USB port Press the POWER button to turn the printer ON. Ink tanks BCI-3eC Cyan BCI-3eM Magenta BCI-3eBK Black BCI-3eY Yellow Power cord S630 Series Color Bubble Jet Printer Documentation and software kit S630 BJ (Bubble Jet) Printhead Paper rest Output tray 1 Carefully remove all items from the box. Install the Printer 6 Driver (Macintosh®) Install the Printer Driver (Macintosh®)6 Align the Printhead 7 Before using the printer, align the printhead to ensure the best quality printing. Load a stack of blank paper in the paper rest. Start the alignment procedure. Windows: a. Click Start, then Settings, then Printers. b. Right-click the Canon S630 icon, then click Properties. c. Click the Maintenance tab, then click the Print Head Alignment icon. d. When asked to start printhead alignment, click OK. e. Follow the on-screen instructions to complete printhead alignment. Macintosh: a. From the File menu in a software application, click Page Setup. b. Click the Utilities button. c. Click the down-arrow to select Test Print. d. Click the Print Head Alignment icon. e. Follow the on-screen instructions to complete printhead alignment. Click OK (Windows) or Close (Macintosh) when finished. Part no. 0010X610/QA-1729 © 2001 Canon U.S.A., Inc. Canon, BJ, BCI and Bubble Jet are trademarks of Canon Inc. All other products and brand names are registered trademarks or trademarks of their respective owners. Specifications subject to change without notice. PRINTED IN U.S.A. PRINTED IN THAILAND 1 2 3 1 2 Insert the S630 Setup Software & User's Guide CD-ROM. NOTE: Screen shots may differ depending on the operating system used. Open the printer driver folder on the CD-ROM, then double-click the Installer icon. Read the License Agreement, then click Accept. 7 After the computer restarts, TURN THE PRINTER ON. Select the Apple menu, then Chooser. 8 Click the S630 icon in the Chooser. The printer name will highlight and move to the right panel. Macintosh Windows Install the Printer Driver (Windows®)6 3 4 5 6 Click Start. (If the Printer Driver button is not red, select Printer Driver, then click Start.) The printer driver will start loading automatically. 6 7 TURN THE PRINTER ON so the printer port (connection) can be automatically detected. To ensure highest quality output, continue with step 7 Align the Printhead. The software will begin identifying the printer port being used. IMPORTANT: If your computer cannot detect a printer port, refer to the Troubleshooting chapter in the S630 Quick Start Guide for instructions. When the Terminate Installation window appears, click OK. If you are prompted to restart the computer, click Yes. When the installation and registration process has completed, click Exit. NOTE: Remember to register your product to ensure product support. The serial number is located on the inside of the printer, to the right of the printhead. NOTE: You can now install the BJ Solution software. Insert the BJ Solution CD-ROM. The setup program should start automatically. Follow the on-screen instructions. 10 9 8 POWER lamp off POWER button POWER lamp on POWER button Be sure the printer is OFF before continuing. 1 NOTE: For Windows 2000 or Windows NT 4.0, log on to Windows as an Administrator before continuing. IMPORTANT: If you see this screen, click Cancel and continue. Close any open software applications, then insert the S630 Setup Software & User's Guide CD-ROM. The setup program should run automatically. Read the Welcome screen, then click Next. NOTE: If the setup program does not run, click Start, then Run, then type D:\msetup.exe, where D is your CD-ROM drive. 3 2 4 5 Read the License Agreement, then click Yes. When the main menu appears, click Install Software. NOTE: If you are prompted to restart Windows, remove the CD-ROM, then click OK. After the computer restarts, insert the CD-ROM and continue. Click Install. The printer driver will load automatically. If the message "No other applications can be running..." displays, click Continue. 9 10 NOTE: To use the BJ Print Monitor, click the Backgrounding button to the On position. Close the Chooser. To ensure highest quality output, continue with step 7 Align the Printhead. NOTE: You can now install the BJ Solution software. Insert the BJ Solution CD-ROM. The setup program should start automatically. Follow the on-screen instructions. When the "Installation was successful" screen displays, Restart your computer. NOTE: Register your product to ensure product support. Open the printer driver folder and double- click the Product Registration icon, then follow the on-screen instructions. The serial number is located on the inside of the printer, to the right of the printh...