valutazioni - 3, GPA: 3.3
(
)
)
|
Facilità d'uso
i 1 Introduction Congratulations on purchasing the Actiontec 54 Mbps Wireless Multiport Print Server. This Print Server is a powerful and convenient network printing solution connecting USB and parallel printer(s) to a wireless 802.11b/g network. The Print Server has a 10/100Mbps auto-sensing port, allowing it to be connected to a 10Base- T or 100Base-TX network without the need for a dedicated print server. The Print Server also supports multiple servers and multiple protocols, providing the capability to print from anywhere, from any computer, and from any application. The Print Server supports TCP/IP and AppleTalk protocols. It also supports the most common network operating systems and protocols, including Windows 98SE, Me, 2000, and XP, and Macintosh OS X (10.2+). Package Contents Make sure the following items came in this package: s Actiontec 54 Mbps Wireless Multiport Print Server s Power Adapter s Installation CD (includes this manual) s Quick Start Guide 1 Actiontec 54 Mbps Wireless Multiport Print Server User Manual 2 Features s 10/100 Ethernet port s Wireless 54 Mbps 802.11g compliant s 64-bit, 128-bit WEP encryption and WPA-PSK support s Wireless infrastructure and ad-hoc mode support s Removable antenna s Integrated wireless site survey tool s Two USB 1.1 ports (2.0 compatible); 1 parallel port s Internet Printing Protocol (IPP) support s Windows-based printing support s Mac OS X-based native printing support (PostScript® printers only) System Requirements s IBM-compatible system with 200 Mhz Pentium, at least 64 MB of RAM, and CD-ROM drive s Ethernet network adapter s Windows 98SE, Me, 2000, or XP s TCP/IP installed s Parallel or USB printer s Wireless router Getting to Know the Print Server This section contains a quick description of the Print Server’s external features. Front Panel The Print Server’s front panel features six lights (LEDs): PWRWLANPrinter123LAN PWR Light The PWR (Power) light illuminates when the Print Server is powered on, and remains off (or dark) when no power is present. WLAN Light The WLAN light illuminates when the Print Server is connected wirelessly. Printer 1 Light The Printer 1 light flashes when printing to the printer connected to the P1 (parallel) port of the Print Server. Printer 2 Light The Printer 2 light flashes when printing to the printer connected to the P2 (USB) port of the Print Server. Printer 3 Light The Printer 3 light flashes when printing to the printer connected to the P3 (USB) port on the rear panel of the Print Server. LAN Light The LAN light illuminates when the Print Server is connected via its LAN port. Rear Panel The Print Server’s rear panel contains five ports (12VDC [Power], P3 [USB], P2 [USB], P1 [Parallel], and LAN), as well as a Reset button. 6ALANP1P2P3ResetC6A12VDC 0.612VDC12VDC 0.612VDC 0.66C66 Power Port The Power port (marked “12VDC”) is used to connect the Print Server to an electrical wall outlet via the Power adapter. P2, P3 Ports The P2 and P3 ports are USB ports used to connect a USB printer to the Print Server. P1 Port The P1 port is a parallel port used to connect a parallel printer to the Print Server. Chapter 1 Introduction 5 LAN Port The LAN port is used to connect the Print Server to a computer via Ethernet cable. Reset Button The Reset button is used to restore the Print Server’s factory default settings. To do this, press the Reset button for 15 seconds. Technical Support Actiontec Electronics prides itself on making durable, high-quality, high-performance products. If you need assistance, the Actiontec Technical Support Department is available all day every day to provide professional support. Actiontec Electronics, Inc. 760 N. Mary Avenue Sunnyvale, CA 94085 Technical Support Phone: (USA) 1-888-436-0657E-mail: This page left intentionally blank. 2 Setting Up the Print Server This chapter explains how to set up the Print Server. There are four parts involved: Connecting the Print Server, Configuring the Print Server, Configuring the Printer’s Settings, and Connecting the Printer. Connecting the Print Server To connect the Print Server to a computer: 1. Remove the Print Server from the package. 2. Insert one end of an Ethernet cable in the “LAN” port of the Print Server, and the other end in an Ethernet port on the back of the computer. 7 Actiontec 54 Mbps Wireless Multiport Print Server User Manual 8 3. Plug the large end of the Power cord into an electrical wall outlet, and the smaller end in the Power (marked “12VDC”) on the back of the Print Server. 4. Make sure the Power and LAN lights on the front panel of the Print Server are blinking or glowing steadily. The Print Server is connected to a computer. Next, go to “Configuring the Print Server,” below. Configuring the Print Server To configure the Print Server: 1. Insert the Installation CD in the CD-ROM drive of the computer. When the window shown below appears, click I...