valutazioni - 2, GPA: 4 ( )

Produttore : Cecilware File Size : 547.88 kb File Nome : 339ff620-6836-4b7e-9e55-23b7753ecfa5.pdf Lingua di insegnamento:

Worldwide 45 -05 20th Avenue, Long Island City, NY 11105 • 718-932-1414 FAX 718-932-7860 OPERATIONAL MANUAL NL05A-A 10/2006 Mechanical Specifications Model # Label No. of Hoppers Hopper Width (in.) Dept Hight (in.) Tank Capacity (lb.) (in.) (gal.) GB1CP Cappuccino 1 8 lb. 7.75 18.625 26 1.5 GB2CP Cappuccino 2 4 lb. 7.75 18.625 26 1.5 GB3CP Cappuccino 3 4 lb. 10.5 18.625 26 1.5 GB1HC-CP Hot Chocolate 1 8 lb. 7.75 18.625 26 1.5 GB2HC-CP Hot Chocolate 2 4 lb. 7.75 18.625 26 1.5 GB1HC-CP-PC Hot Chocolate 1 8 lb. 7.75 18.625 26 1.5 GB2HC-CP-PC Hot Chocolate 2 4 lb. 7.75 18.625 26 1.5 Add an additional 4” when installing with 4” legs. Add 2" for line cord and valve fitting clearance. Plumbing: .” water line required. Electrical Specifications Volts Hz Number of Heaters Amps Receptacle Nema No. Circuit Model No. Phase Watts Breaker GB1CP, GB2CP, GB3CP 120V 1 50/60 1.8KW 1 15 5-15R 15A GB1HC-CP, GB2HC-CP GB1HC-CP-PC*,•GB2HC-CP-PC* * Automatic Portion Control For Wiring, refer to Wiring Diagrams. See Electrical Data Label attached to the back of the unit for proper voltages, breaker sizes and electrical outlet requirements for each model number listed. 2 I. INSTALLATION INSTRUCTIONS This equipment is to be installed to comply with the applicable Federal, State, or local plumbing codes having jurisdiction. In addition: 1. A quick disconnect water connection or enough extra coiled tubing (at least 2x the depth of the unit) so that the machine can be moved for cleaning underneath. 2. An approved back flow prevention device, such as a double check valve to be installed between the machine and the water supply. The GB beverage dispenser is equipped with a ." Flare Water Inlet Fitting which is located on the left side in the back of the base (when looking at the machine from the front). HIGHLY RECOMMENDED: A WATER SHUT-OFF VALVE and A WATER FILTER, preferably a combination Charcoal/Phosphate Filter, to remove odors and inhibit lime and scale build up in the machine. Note: In areas with extremely hard water, a water softener must be installed in order to prevent a malfunctioning of the equipment and in order not to void the warranty. After the machine has been unpacked and placed on a counter, pull out the stainless steel drip tray. It should contain the following: A Set of 4 Adjustable Leveling Legs & Water Inlet Fitting. Connect the ." dia. copper waterline to the ." flare water inlet fitting of the valve. II. START UP INSTRUCTIONS Caution: Do not plug into power outlet yet. Make sure the Heater Switch is OFF (Toggle Down) 1. Plug into power outlet. 2. Turn Heater Switch ON. 3. Allow 10 to 15 minutes for water to reach dispense temperature of 185°F. Heater Indicator Light (red) goes ON when heater is on (see lower front panel). 4. Fill hopper with product. 5. Place cup under dispenser. 6. Push and hold Dispense Button until water flows from mixing chamber. 7 . Machine is primed and ready to go. III. NORMAL OPERATION (POUROVER AND AUTOREFILL) 1. Place a 6 oz. o...

Scarica la tua

Per scaricare, digitare 2 cifre :