valutazioni - 1, GPA: 3
(
)
)
|
Facilità d'uso
6) Plug the icemaker back in. Move the power switch to the "ON" position. Make ice using the solution until the icemaker stops making ice. 7) Move the power switch to the "OFF" position, then unplug the icemaker. 18 8) Remove the front panel, top panel, and bin top. 9) Pour clean, warm water into the storage bin and melt any remaining ice. 10) Remove the louver and air filter. Plug the icemaker back in. Move the control switch to the "DRAIN" position, then move the power switch to the "ON" position. Allow the water system to drain completely. 11) Move the power switch to the "OFF" position, then unplug the icemaker. 5. Sanitizing Procedure - Final 1) Make sure the power switch is in the "OFF" position, the icemaker is unplugged, and the water supply line shut-off valve is closed. 2) Remove the agitator. Pour the sanitizing solution over the extruding head until the evaporator assembly and the reservoir are full and the solution starts to overflow into the drain pan. Allow the icemaker to soak for about 10 minutes before operation. 3) Move the control switch to the "ICE" position. Replace the air filter, louver, agitator, bin top, and panels in their correct positions. 4) Plug the icemaker back in. Move the power switch to the "ON" position. Make ice using the solution until the icemaker stops making ice. 5) Move the power switch to the "OFF" position, then remove the louver and air filter. Move the control switch to the "DRAIN" position, then move the power switch to the "ON" position. Allow the water system to drain completely. 6) Move the power switch to the "OFF" position, then unplug the icemaker. 7) Remove the front panel, top panel, and bin top. 8) Pour clean, warm water into the storage bin and melt any remaining ice. Remove the agitator. Pour clean, warm water over the extruding head until the evaporator assembly and the reservoir are full and the water starts to overflow into the drain pan. Plug the icemaker back in, then move the power switch to the "ON" position. Allow the water system to drain completely. 9) Move the power switch to the "OFF" position, then unplug the icemaker. 10) Move the control switch to the "ICE" position. Replace the air filter, louver, agitator, bin top, and panels in their correct positions. 11) Open the water supply line shut-off valve to supply water to the reservoir. Move the power switch to the "ON" position to start the automatic icemaking process. Allow the icemaker to run for about 30 minutes. 12) Move the power switch to the "OFF" position, then remove the louver and air filter. Move the control switch to the "DRAIN" position, then move the power switch to the "ON" position. Allow the water system to drain completely. 13) Dispense all of the ice from the storage bin. 14) Move the power switch to the "OFF" position, then unplug the icemaker. 15) Remove the front panel, top panel, and bin top. Remove the agitator and drip ring. 16) Wipe down the inside of the storage bin, inside of the bin top, the agitator, and drip ring with a clean cloth. 19 17) Move the control switch to the "ICE" position. Replace the air filter, louver, drip ring, agitator, bin top, and panels in their correct positions. On the push-button model, reconnect the connector. WARNING! CHOKING HAZARD: Ensure all components, fasteners, and thumbscrews are securely in place. Make sure that none have fallen into the storage bin. 18) Plug in the icemaker, then move the power switch to the "ON" position to start the automatic icemaking process. 20 B. Maintenance This icemaker must be maintained individually, referring to the instruction manual and labels provided with the icemaker. The schedule below is a guideline. More frequent maintenance, however, may be required depending on water quality, the icemaker's environment, and local sanitation regulations. Consult with your local distributor about inspection and maintenance service. To obtain the name and phone number of your local distributor, visit or call Hoshizaki Technical Support at 1-800-233-1940. WARNING 1. Only qualified service technicians should attempt to service or maintain this icemaker. 2. Disconnect power before performing maintenance. Maintenance Schedule Frequency Area Task Every 2 Weeks Air Filter Inspect. Wash with warm water and neutral cleaner if dirty. Monthly External Water Filters Check for proper pressure and change if necessary. Icemaker Exterior Wipe down with a clean, soft cloth. Use a damp cloth containing a neutral cleaner to wipe off oil or dirt build up. Clean any chlorine staining (rust colored spots) using a non-abrasive cleaner like Zud or Bon Ami. Every 6 Months Icemaker and Storage Bin Clean and sanitize per the cleaning and sanitizing instructions provided in this manual. Gear Motor Drain Pan Wipe down with a clean cloth and warm water. Icemaker Drain Check to make sure it is clear. Yearly Inlet Water Valve, Dispense Water Valve, and Drain Valve Close the water supply line shut-off valve and drain ...