valutazioni - 6, GPA: 4 ( )

Produttore : Cornelius File Size : 1.08 mb File Nome : Lingua di insegnamento:

Access to the timer is provided by removing the merchandiser/upper front panel. 1. Unpack the kit. 2. Remove the two (2) screws from each side of the dispenser cabinet and the plastic hopper covers (2) that were shipped with the unit. 3. Place the adapter lid on the unit and use the four (4) screws that were removed to fasten the lid in place. 4. Install the ice baffle on the lid assembly as shown in Figure 2. Release Date: November 4, 2010 Revision: B © 2007-2010, IMI Cornelius Inc. - 1 -Publication Number: 620204732INS ED/DF300 30” CCM330/430/530/630/830/1030 Nordic Style Lid Kit Installation Instructions IMPORTANT: The baffle prevents ice from over–filling the manual fill area during agitation/ dispensing with a full storage bin and forcing the manual fill cover off. 5. Seal the ice maker to the top of the dispenser after determining the correct location for the ice maker (see Figure 1). A. Run beads of RTV around the opening in the lid and inside of the perimeter of the ice maker outline so that the ice maker will set on the RTV. B. Set the ice maker onto the lid and position it as required. C. Wipe away the excess RTV. 6. Drill 0.136” diameter holes into the ice maker cabinet and the dispenser lid using the ice maker mounting brackets as templates. USE CAUTION SO AS NOT TO DRILL INTO ANY ICE MAKER COMPONENTS (CONDENSER, TUBING, ETC.). Secure the brackets using the #10 sheet metal screws provided. 7. Install the wire form bracket, supplied with the bin stat kit (item 4), through the 5/8” diameter hole in the bottom of the ice maker. Wrap the eye of the wire form over the stud near the hole to the end of the wire form bracket and wrap the tube around the end of the bracket several times, insuring the tube is secure. NOTE: The bin stat must not interfere with the agitator rotation or in the path of ice falling from the ice- maker. If it interferes with the agitator or in the path of ice, bend the bracket out of the way. 8. For 22–inch wide ice makers, locate the lid opening covers (2) (item 11) as shown in Figure 1. Secure the covers to the adapter lid by drilling 0.136” diameter holes into the lid. Use the covers as templates to locate the mounting holes. Secure the covers with the # 10 sheet metal screws. 9. Locate the cleaning caution label (item 5) on the manual ice fill cover (item 4) as shown in Figure 1. Place the manual fill cover in position over the flange on the lid assembly and the front access hopper opening. 10. The unit is now ready for operation. Figure 1. ED/DF300 Kit Publication Number: 620204732INS - 2 - © 2007-2010, IMI Cornelius Inc. ED/DF300 30” CCM330/430/530/630/830/1030 Nordic Style Lid Kit Installation Instructions Figure 2. ED/DF300 Kit Ice Baffle Installation Figure 3 ED/DF300 Mounting Template © 2007-2010, IMI Cornelius Inc. - 3 -Publication Number: 620204732INS ED/DF300 30” CCM330/430/530/630/830/1030 Nordic Style Lid Kit Installation Instructions FRONT PANEL OF ICE MAKER REMOVED FOR CLARITY SEE D...

Scarica la tua

Per scaricare, digitare 2 cifre :