valutazioni - 0, GPA: 4
(
)
)
|
Facilità d'uso
By following the wizard, it allows you to easily make all the necessary settings for the Remote Commander (components’ preset codes, etc.,). Furthermore, you can add and customize a range of settings which are not available with On-Remote Setup. • On-Remote Setup “On-Remote Setup” is a way of setting up directly with the Remote Commander. However, some advanced settings are not available with On-Remote setup (see the table below). IMPORTANT You cannot use both methods. Once you set up the Remote Commander by either On-PC Setup (recommended) or On-Remote Setup, you cannot make additional settings using the other method. You can only delete the entire setup and start over using the other setup method. Programmable items of On-PC Setup and On-Remote Setup *1 System Control function is used to perform a programmed series of actions (a macro) on several AV components by pressing just one button. *2 An XPRESS function is also a macro function which executes a series of actions for controlling several AV components by pressing just one key. The difference is, the XPRESS display stays available for you to make additional settings. *3 An Air-Slide is a function which executes an XPRESS function by “sliding your finger” in a set pattern across the display. Setting procedure for On-PC Setup If you set up the Remote Commander using On-PC Setup (recommended), follow the procedures below. Step1: Installing the “AX Remote Editor”. Step2: Installing the USB driver. Step3: Using the “AX Remote Editor” to set up the Remote Commander. See the Help file of AX Remote Editor for setting details. Step4: Operating an AV component using the Remote Commander. After finishing the setting with AX Remote Editor, operate the AV component using the Remote Commander. •To operate the XPRESS function. •To operate components individually. Option1: You can also change the Unit Settings such as the backlight and beep. Option2: You can also change the settings of the buttons or keys on the Remote Commander with AX Remote Editor. See the Help of AX Remote Editor for setting with AX Remote Editor. When using On-PC Setup If you set up the Remote Commander using On-PC Setup, you do not need to read “Setting procedure for On-Remote Setup” on this manual and the PDF manual. Setting procedure for On- Remote Setup If you set the Remote Commander On-Remote Setup, follow the procedure below. Step1: Setting the preset codes. Step2: Operating AV components using the Remote Commander. After finishing the setting of the preset codes, you can use the Remote Commander to operate your AV components. •To operate the XPRESS function. •To operate components individually. Option1: You can also change the Unit Settings such as backlight and beep. Option2: You can also change the settings of the buttons or keys on the Remote Commander. When using On-Remote Setup If you set up the Remote Commander using On-Remote Setup, you do not need to install the AX Remote Editor and its driver, or connect the Remote Commander to your PC. You also do not need to read the PDF pages 15 to 20. Setting up for your PC By installing the “AX Remote Editor” on the supplied CD-ROM onto your PC, you can set up the Remote Commander simply with your PC. “AX Remote Editor” makes setting up complex series of operations (a macro) easy, and also allows various other convenient functions to be set up. For details, see the Help menu provided in “AX Remote Editor.” “AX Remote Editor” system requirements Operating systems (manufacturer installed): Windows XP Media Center Edition 2005/ Windows XP Media Center Edition 2004/ Windows XP Media Center Edition/ Windows XP Professional/Windows XP Home Edition/Windows 2000 Professional Computer: IBM PC/AT or compatible (The software does not run on Macintosh operating system) CPU: Pentium II, 300 MHz or more Required Hard Drive Capacity: 20 MB or more RAM: 64 MB or more (128 MB or more for Windows XP) Display: High (16 bits) color or higher, 1024 . 768 dots or better* Required Peripherals: CD-ROM Drive, USB port * Does not operate with a display of under 1024 . 768 dots. Installing the “AX Remote Editor” Follow the instructions below to install. Notes • Do not simply copy the “AX Remote Editor” folder in the supplied CD-ROM to a PC. You need to install it properly for it to work. • Administrator privileges are required for installation on PCs running Windows 2000 or Windows XP. 1 Close all software running on Windows. 2 Insert the supplied CD-ROM into the CD-ROM drive of the PC. After a moment, “RM-AX4000 Install CD Menu” appears. 3 Click [Install AX Remote Editor]. “AX Remote Editor 1.1 Setup” appears. 4 Click [Next]. Follow the on-screen instructions and proceed with the installation. Tip If the installation screen is hidden behind other windows If “AX Remote Editor 1.1 Setup” disappears behind other screen while installing, press the [Tab] key several times while pressing down the [Alt] key to bring up “AX Remote Editor 1.1 Setup” again. 5 Click [Finish]. ...
Questo manuale è adatto anche per i modelli :Altri elettrodomestici da cucina - RM-AX4000 (437.88 kb)