valutazioni - 2, GPA: 3.5
(
)
)
|
Facilità d'uso
This appliance is for household use only. 27 HOWTOCLEANPARTSIDENTIFICATIONHOWTOCLEANPARTSIDENTIFICATION REMOVING MINERAL DEPOSITS: Hard water can leave mineral deposits that create scale build-up on the interior of the kettle. To avoid this build-up, it is best to always use distilled water. If mineral deposits do occur, follow the instructions below to remove them. 1. Fill the kettle halfway with water and bring to a boil. 2. Add one cup of white vinegar. Let the mixture soak overnight or for at least 6 hours. 3. Empty the mixture and rinse out the kettle. 4. Refill the kettle with water only. Bring to a boil and empty again. 5. Repeat as needed. TROUBLESHOOTING PROBLEM SOLUTION The kettle and indicator light do not work when the power switch is up. •Make sure the kettle is seated properly on the power base and that the base is connected to a functioning electrical outlet. •If the problem persists, please contact our customer service department toll-free at (800) 276-6286 or through email at CustomerService@AromaCo.com. The water is boiling, but the power switch and indicator light do not turn off. •The auto-shut off function will not operate properly if the lid is not completely closed. Allow kettle to cool, then check to see that the the lid is properly locked into place. •If the problem persists, please contact our customer service department toll-free at (800) 276-6286 or through email at CustomerService@AromaCo.com. The power switch won't depress and the kettle will not turn on. •Make sure that the kettle is seated properly on the power base and that the base is connected to a functioning electrical outlet. •Water or debris on the bottom of the kettle or on the power base may interfere with the functioning of the kettle. Be sure that the base of the kettle and the power base are dry and free of debris. •If the problem persists, please contact our customer service department toll-free at (800) 276-6286 or through email at CustomerService@AromaCo.com. 27861345 1. Kettle Lid Handle 2. Kettle Lid 3. Easy-Grip Handle 4. Kettle Body 5. Power Switch 6. Indicator Light 7. Power Base 8. Spout 63 USINGYOURWATERKETTLEUSINGYOURWATERKETTLEUSINGYOURWATERKETTLEUSINGYOURWATERKETTLE BEFORE FIRST USE: Before using for the first time, it is recommended to clean the interior of the kettle thoroughly. Please follow the procedure below before using the kettle: 1. Remove all packing materials and make sure that the product is received in good condition. 2. Taking care to keep the electrical components on the exterior of the kettle dry, wipe out the interior of the kettle with a damp, soapy cloth. HELPFUL HINT: •If your hand will not fit inside the kettle, swish warm, soapy water around the inside of the kettle with the lid closed. Rinse thoroughly with water. 3. Rinse out the inside of the kettle thoroughly with water. 4. With a damp cloth, gently wipe off the exterior of the kettle. Do not wipe off electrical components. 5. Dry all parts completely. 6. It is also recommended to run your kettle through one boiling cycle before using it to consume beverages. Following the instructions in “Boiling Water” below, boil one kettle of water. When water has boiled, pour it out and rinse the inside of the kettle once more. 7. Your kettle is now ready for use. BOILING WATER: 1. Place the power base on a sturdy, level and heat-resistant surface. 2. Remove the lid and fill with water through lid opening. Do not fill past the “MAX” line on the interior of the kettle. NOTE: •Neverfillkettlewithanyliquidotherthanwater. HELPFULHINT: •Usedistilledwaterwhenpossibleforbesttasteandtominimizemineralbuild-upinthekettle. 3. Replace the lid so that it snaps securely into place. 4. Place the kettle onto the power base and plug the power cord into an available electrical outlet. 5. Push down on the POWER SWITCH to begin the boiling process. The indicator light will illuminate. CONTINUED ON NEXT PAGE 4 BOILING WATER (CONT.): NOTE: •Never open the lid while water is boiling. •The stainless steel body will become extremely hot. 7. Once the water has boiled, the POWER SWITCH will flip up with an audible click. The indicator light will turn off, and the kettle will automatically shut off. 8. Lift the kettle off the power base before pouring, using the easy-grip handle. Take care not to touch the stainless steel body, as it will be hot. 9. After pouring, make sure the bottom of the kettle and the power base are dry before placing kettle on the power base. 10.When not in use, unplug the power base from the electrical outlet. HOWTOCLEAN 1. Always unplug the electric kettle and allow it to cool completely before cleaning. 2. Wipe the exterior of the kettle with a clean, damp cloth, taking care to avoid electrical components. Use a soft cloth to dry. 3. To clean the interior of the kettle, use a soft sponge and soapy water to gently scrub. CAUTION: HELPFULHINT: •Ifyourhandwillnotfitinsidethekettle,swishwarm,soapywateraroundtheinsideofthekettlewiththelidclosed...
Questo manuale è adatto anche per i modelli :Altri elettrodomestici da cucina - AWK-208P (77.94 kb)