valutazioni - 3, GPA: 3.7
(
)
)
|
Facilità d'uso
Note: The concealed heating element is protected by 2 automatic safety devices. If your kettle is accidentally turned on without being filled or is allowed to boil dry, it will automatically repeat a cycle of turning off, cooling down, and coming back on unless unplugged. Unplug the kettle and wait 15 minutes for the heating element to cool down before refilling and turning on for normal use. BOILING WATER 1. To open the lid, press the lid release inside the handle (A). For convenience, the lid stays in the up position. 2. Fill the kettle with water to desired level. Be sure not to exceed the MAX line on the water-level markings (B). 3. To close the lid, bring it down and press firmly into place. Important: Never open the lid while water is boiling. 4. Place the 360-degree swivel base on a flat surface then place the kettle onto the base (C). Plug into a wall outlet. 5. To turn on the kettle, press the I/O (On/Off) switch, located at the top of the handle, to the I (On) position (D). The indicator light illuminates. 6. The kettle shuts off automatically when the water has boiled. 7. Unplug the kettle. SCALE FILTER Lime scale forms over time when water is heated. Though scale is natural and harmless, it may produce a powdery substance or mineral-like chunks that can get into your hot beverages and affect the taste. While the concealed element in this kettle is designed to help reduce scale buildup, the filter helps prevent particles from pouring into your beverage. Care and Cleaning This appliance contains no user-serviceable parts. Refer service to qualified service personnel. • Before cleaning, be sure the base is unplugged and the kettle has cooled completely. Empty any remaining water from the kettle. • Wash the inside of the kettle and the scale filter with soapy water and rinse. NEVER IMMERSE THE KETTLE IN WATER OR OTHER LIQUIDS or place in a dishwasher. • Wipe the exterior of the kettle and base with a damp cloth or sponge and dry. The concealed element at the bottom of the interior may discolor. This will not affect performance. Do not use abrasive soaps, cleansers, or scouring pads. • Over time, the kettle may heat up but will not boil, depending on your use and the hardness of the water in your area. When this happens, it is time for descaling. Use a scale/lime remover and follow its manufacturer’s directions. Como usar Este aparato es solamente para uso domestico. Antes de utilizar este producto por primera vez, lave el filtro y el interior del hervidor con agua y jabon y enjuague bien. Nota: El elemento calefactor oculto de este aparato viene protegido por dos dispositivos de seguridad que funcionan automaticamente. Si se enciende el hervidor inadvertidamente estando vacio o si se permite que el aparato hierva en seco, este completa un ciclo automatico de apagado, enfriamiento y reinicio siempre que se desconecte el aparato. Desconecte el hervidor y espere que los elementos calefactores se enfrien durante 15 minutos antes de llenarlo nuevamente para uso normal. PARA HERVIR EL AGUA 1. Para abrir la tapa, presione el desenganche de tapa situado en la parte interior del asa (A). Para su conveniencia, la tapa permanece abierta. 2. Llene el hervidor hasta el nivel deseado. Asegurese de no exceder el nivel de llenado MAX (B). 3. Para cerrar la tapa, llevela hacia abajo y presionela firmemente hasta que encaje en su lugar. Importante: Nunca abra la tapa del hervidor mientras el agua esta hirviendo. 4. Coloque la base giratoria sobre una superficie plana y coloque el hervidor sobre la base giratoria (C). Enchufe a una toma de corriente. 5. Para encender el hervidor, presione el interruptor I/O situado en la parte de arriba del asa para ajustarlo a la posicion I (encendido) (D). La luz indicadora se ilumina. 6. El hervidor y la luz indicadora se apagan automaticamente una vez que el agua hierve. 7. Desenchufe el hervidor. FILTRO PARA SEDIMENTOS Los sedimentos de cal se acumulan con el tiempo al calentar el agua. Aunque los sedimentos son naturales ...