valutazioni - 3, GPA: 4
(
)
)
|
Facilità d'uso
High performance, high volume production with even, consistent, controlled temperatures 100° to 450° F (40°-230°C) range. 3/4" (19mm) thick griddle plate, with 24" (610 mm) deep grilling surface. Garland has designed this heavy-duty griddle to give the features required for high-volume operations. Griddles are available with hi-lo valve controls or for temperature set control models with snap action thermostats. G24 griddles with snap action thermostats do not require any electrical connections. Valve or thermostat models have a control and burner for every 12” (305mm) width of griddle for maximum heat input on the plate surface. Griddle Features: • Stainless steel front - the balance, black power coat epoxy Full spatula width front grease trough Large grease bucket holds 1-3/4 gallons (7.9 liters) 3/4" (19mm) polished steel griddle plate with 2-5/8" (67mm) welded splash guards on both sides and rear 24" (610mm) deep grilling surface Available with snap action thermostats or hi-lo valves Chrome plated thermostat guards 33,333 BTU (valve controlled) or 30,000 BTU (thermostat controlled) for every 12" (305mm) of griddle width 100° to 450° F (40°-230°C) temperature range 5 griddle widths available - 24" (610mm) through 72" (1829mm) • 4” (102mm) stainless steel legs Optional Features: □ Stainless steel sides □ Stainless steel back □ Grooved griddle plate (in 12" sections) □ For models that are "CE" approved with valve controlled flame failure features add the suffix "GSFD" at the end of the model number Optional CS24 Series Stands: Floor Stands: Heavy-duty stands of open design with seamless welded square tube legs. Black finish storage shelf supplied with stands up to 48" (1219mm) wide. Working height of all units on stands 35-1/2" (902mm). Stand widths available in 15" (381mm), 24" (610mm), 30" (762mm), 36" (914mm), 48" (1219 mm), 60" (1524mm) and 72" (1829mm). Example for G24-36G griddle, specify compatible CS24-36 stand. For stainless steel finish, add SS suffix to model number Optional: □ Swivel caster; set of 4 Garland Commercial Industries, Inc. 185 East South Street Freeland, Pennsylvania 18224 Phone: (570) 636-1000 Fax: (570) 636-3903 Garland Commercial Ranges Ltd 1177 Kamato Road, Mississauga, Ontario L4W 1X4 CANADA Phone: 905-624-0260 Fax: 905-624-5669 Enodis UK LTD Swallowfield Way, Hayes, Middlesex UB3 1DQ ENGLAND Telephone: 081-561-0433 Fax: 081-848-0041 GARLAND” Item #:___________________________ Models: All G24 Series Product Name: Heavy-Duty Gas Griddles Input Chart Natural Gas Model Description Controls BTU/HR kW/HR G24-24G G24-24GTHX 24” (610mm) Griddle 2 Hi-lo Valves 2 Thermostats 66,500 60,000 19.48 17.58 G24-36G G24-36GTHX 36” (914mm) Griddle 3 Hi-lo Valves 3 Thermostats 100,000 90,000 29.31 26.38 G24-48G G24-48GTHX 48” (1219mm) Griddle 4 Hi-lo Valves 4 Thermostats 133.000 120.000 38.98 35.17 G24-60G G24-60GTHX 60” (1524mm) Griddle 5 Hi-lo Valves 5 Thermostats 166,500 150,000 48.78 43.96 G24-72G G24-72GTHX 72” (1829mm) Griddle 6 Hi-lo Valves 6 Thermostats 200,000 180,000 58.61 52.75 Installation Notes Manifold Operating Pressure Combustible Wall Clearances: In (mm) Sides Back Base Natural Gas Propane 6(152) 6(152) Non-combustible 4” WC (10 mbar) 10” WC (24 mbar) NOTE: Installation clearance reductions are applicable only where local codes permit Note: For use with Natural & L.P Gas only Ratings shown are for natural gas installations up to 2000 feet (610m) above sea level. BTU input ratings must be de-rated for high altitude installations. Specify altitude of product if over 2000 feet (610m) *HEIGHT OF GRIDDLE PLATE (ærnm) 12-7/8" (327mm) 10-1/4" * (259mm) 4" (102mm) 30-3/8" (772mm) Model W G24-24G G24-24GTHX 24” (610mm) G24-36G G24-36GTHX 36” (914mm) G24-48G G24-48GTHX 48” (1219mm) G24-60G G24-60GTHX 60” (1524mm) G24-72G G24-72GTHX 72” (1829mm) ,1 13-7/8" (352 mm) r 1-1/2" (38mm) 3/4" NPT INLET (G24-24,G24-36) — 1" NPT GAS INLET (G24-48,G24-60,G24-72) Continuous product improvement is a Garland policy. Specifications and design are subject to change without notice. Printed in USA Form #G24G/GTHX (02/16/07)...