valutazioni - 4, GPA: 4
(
)
)
|
Facilità d'uso
If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature. POLARIZED PLUG: This appliance has a polarized plug, (one blade is wider than the other). As a safety feature to reduce the risk of electrical shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature. HOW TO INSTALL YOUR UNDER-CABINET CAN OPENER 1. This can opener is designed to be installed under a cabinet (see Figure 1). The hardware for installation is packaged in a separate plastic bag. To select a location for installation please consider the following: A) An electrical outlet should be within easy reach of the cord so that it will not drape over heating appliances or get in the way of your normal work area. B) Do not install above a cooking or heating area such as a stove. 2. Position the mounting bracket at least 4 inches from the wall and leave sufficient room behind the can opener to insert a knife for sharpening. Use the included mounting template to mark the location of the screw holes. 3. Re-check that the unit is positioned in the desired area before drilling the holes in the cabinet. Using a 3.16 inch drill bit, drill the 4 holes in the cabinet. NOTE: If the cabinet has an overhang (see template) you must use a spacer. The spacer should be the same thickness as the amount of overhang. The outside dimensions of the spacer are provided on the template. If a spacer is used, longer #8 x 32 machine screws are required. The screws should be 1 7.inches under the head plus the 8 thickness of the spacer. 4. The four screws may be installed from the top down or from the bottom up (see Figure 2). If installed from the top, be sure the bottom of the screw does not interfere with the body of the can opener and prevent assembly. If this occurs you will need to trim off the excessive screw length or you may place a spacer under the screw head. Place the hex nuts in the hex shaped recess of the mounting bracket and hold in place with the end of a pencil until you engage the threads. NOTE: Do not tighten the screw all the way until you have inserted all 4 screws. Tighten all four screws. Insert the unit into the bracket (see Figure 3). Lock can opener into place by turning Removable Locking Knob clockwise (see Figure 4). Do not over-tighten. 3 FIGURE 1 FIGURE 1 Spacer Mounting Bracket FIGURE 2 FIGURE 3 FIGURE 4 LOCK UNLOCK 4 FIGURE 5 Removable Piercing Lever Magnetic Lid Holder Bottle Opener Mounting Bracket Removable Locking Knob Cord Storage (not shown) Knife sharpener Bag Opener HOW TO USE YOUR UNDER-CABINET CAN OPENER 1. Attach Piercing Lever as shown in Figure 6. 2. Raise piercing lever and place the rim of a can at an angle behind the piercing lever. 3. Lower the piercing lever. This starts the cutting action. The lever will remain down until the lid is completely cut. Then it will stop automatically. 4. Hold the can and raise the lever to release the can. 5. Carefully slide the lid away from the magnet. TIPS • This can opener is designed to open cans only when mounted under a cabinet. The motor will operate if the unit is not mounted, but do not attempt to open cans unless properly mounted. • If there is a ridge in the rim of the can, open the other end or begin the cutting action immediately after the ridge. • For extremely large or heavy cans, it is recommended that you lightly support the can as it is being opened. TO OPEN BOTTLES Insert the top of the bottle so the cap is under the metal hook. Lightly support the back of the can opener and then press the bottle down until the cap is removed. TO OPEN BAGS Hold the plastic bag along the right side, with both hands at the top corner. Insert the upper edge of the bag into the opener and slide the bag from left to right. 5 TO SHARPEN KNIFE BLADE TO SHARPEN KNIFE BLADE TIPS • Be sure knife is clean and free of grease. Greasy or wet blades may coat the sharpener and the blade will not sharpen satisfactorily. • Do not attempt to sharpen hollow ground or serrated blades. • Raise the knife handle slightly at the end of each sharpening, if the knife has a curved tip. • Uneven sharpening may occur if you force the knife blade against the sharpener. • The can opener/knife sharpener is intended for household use only. HOW TO CLEAN YOUR CAN OPENER 1. Unplug the unit from the electrical outlet. Remove the can opener from the mounting bracket by turning the lock clockwise and sliding the unit back. 2. To remove the piercing lever assembly, raise assembly up and pull away from can opener (see Figure 6) 3. Wash piercing lever in warm soapy water. Rinse and dry. 4. Replace assembly. 5. To clean unit, wipe with a clean, damp cloth. Do not immerse in water. Note: Cord storage is provided at the back of the can opener for exce...
Questo manuale è adatto anche per i modelli :Altri accessori per la casa - 2246MEX (536.79 kb)