valutazioni - , GPA: ( )

Istruzioni per l'uso Axor, Modello 7271.521

Produttore : Axor
File Size : 752.71 kb
File Nome :

Lingua di insegnamento:

Il documento viene caricato, si prega di attendere

Scarica la tua primo

Il documento viene caricato, si prega di attendere

Scarica la tua primo

With valve now firmly secured to the fume hood install the cap nut cross handle and secure with handle screw. index button into handle counter bore. Complete the inlet and outlet piping to the valve and check for leaks. HANDLE SCREW INDEX BUTTONS (AIR, GAS, VACUUM, WATER) HANDLE STEM FIGURE 2 45° ANGLED FUME HOOD IMPORTANT: FLUSH ALL SUPPLY LINES PRIOR TO FITTING INSTALLATION. IMPORTANT: FLUSH ALL SUPPLY LINES PRIOR TO FITTING INSTALLATION. Remove the hold-down nut from the body and the handle screw from the stem. With a pair of body such that the threads on the two components lock together. Place the front end of the body (end which contains the operating cartridge) through the 1-1/2" hold-down nut onto the body hold-down nut at this time. Align the mounted fitting from the backside of the fume hood such that the body's inlet and outlet are in line and the support the valve body from the backside, tighten the hold-down nut securely. handle onto the stem and tighten it into place with the screw removed from the stem. index button into handle Complete the inlet and outlet piping to the fitting and check for leaks. 7271.300 7271.301 7271.571 7271.521 7271.071 7271.021 7271.400 M968484 3 SPOUT NUT SPOUT BODY RTRIDGE 962329-0070A LH 962330-0070A RH W Index M962312-0070A HANDLE M962310-0020A SPOUT ASSEMBLY WALL MOUNTED REMOTE CONTROL 4 WALL MOUNTED REMOTE CONTROL OUTLET FITTING (GOOSE NECK SPOUTS), 7271.300/301 AVAILABLE REPAIR PARTS LOCK NUT STEEL WASHER HOOD MOUNTING HOLE 1-1/4" DIA. (32mm) Remove lock nut and steel washer from fitting. Align and mount fitting from the front side of the fume hood. Using fitting body and install steel washer and lock nut. tighten the lock nut securely. With fitting now firmly secured to the fume hood complete the in piping to the fitting. (See rough-in for piping requirements). Turn supply to fitting on and check for leaks. Note: See roughing-in to determine pipe nipple length from side wall. Turn spout nut counter clock-wise to loosen and remove spout assembly from fitting base. pipe nipple (See rough-in for piping requirements). Thread spout body onto pipe nipple and align so that spout assembly is vertical. Thread spout assembly onto spout body and tighten. Turn supply to fitting on and check for leaks. FUME HOOD WALL FUME HOOD WALL VACUUM BREAKER REPAIR KIT M962322-0070A GOOSENECK SPOUT M962316-0020A SERRATED TIPS M962318-0020A BREAKER SPOUT M962317-0020A FITTING 3/8" NPT APPLY SEALANT CW Index M962312-0070A GAS Index M962313-00 AIR M962314-00 VAC M962315-00 VAC Ind M962315-007 HANDLE M962310-0020 GAS In M962313-007 AIR In M962314-007 CARTRIDGE M962329-0070A M962330-0070A CARTRIDGE M962336-0070A CARTRI M962336-007 CARE INSTRUCTIONS: DO: SIMPLY RINSE THE PRODUCT CLEAN WITH CLEAR WATER. DRY WITH A SOFT COTTON FLANNEL CLOTH. DO NOT: CLEAN THE PRODUCT WITH SOAPS, ACID, POLISH, ABRASIVES, HARSH CLEANERS, OR A CLOTH WITH A COARSE SURFACE. ...