valutazioni - 2, GPA: 4
(
)
)
|
Facilità d'uso
Using a FTF8-ATT Chase Termination: Refer to specific installation instructions in- cluded with FTF8-ATT chase terminations for clearance and installation details. Note: It is recommended that all exterior ex- posed metal fireplace components; such as ter- minations, flashings, storm collars and/or flue be painted with a premium quality, high tem- perature, rust preventative paint designed for metal. This is especially important when instal- lations are made in abnormally adverse or corro- sive environments; such as near lakes, oceans or in areas with consistently high humidity condi- tions. Consult the paint manufacturers instruc- tions for proper preparation and application. Figure 35 Less Than 10' 3' Min 2' Min. 10' 3' Min TEN FOOT RULE SUMMARY The minimum chimney height above the roof and/or to adjacent walls and buildings is speci- fied by all major building codes. If the horizontal distance from the peak of the roof is less then 10', the top of the chimney must be at least 2' above the peak of the roof. If the horizontal distance from the chimney edge to the peak of the roof is more than 10' a chimney height reference point is established on the roof surface 10' horizontally from the chimney edge. The top of the chimney must be at least 2' above this reference point. In all cases, the chimney cannot be less then 3' above the roof at the edge of the chimney. The 2' in 10' rule is necessary in the interest of safety but does not ensure smoke-free opera- tion. Trees, buildings, adjoining roof lines, adverse wind conditions, etc., may require a taller chimney should the fireplace not draft properly (seeFigure 35). MULTIPLE TERMINATIONS If more than one termination is located in the same chase or within the same general prox- imity, we suggest they should be separated in distance at least 24" horizontally from flue center to flue center and stacked or staggered vertically at least 18" apart, from the termina- tion of one smoke exit to the termination of another smoke exit (Figure 36). 18" 18" 24" 24" CTDT CTDT NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE. Using a FTF8-CTDT Chase Termination: Refer to specific installation instructions in- cluded with the FTF8-CTDT chase termination for clearance and installation details. Using a FTF8-CT1 Chase Termination: Refer to specific installation instructions in- cluded with FTF8-CT1 chase terminations for clearance and installation details. Using a FTF8-CT2 Chase Termination: Refer to specific installation instructions in- cluded with FTF8-CT2 chase terminations for clearance and installation details. Using a FTF8-CTT Chase Termination: Refer to specific installation instructions in- cluded with FTF8-CTT chase terminations for clearance and installation details. Using a FTF8-ATT Chase Termination: Refer to specific installation instructions in- cluded with FTF8-ATT chase terminations for clearance and installation details. Note: It is recommended that all exterior ex- posed metal fireplace components; such as ter- minations, flashings, storm collars and/or flue be painted with a premium quality, high tem- perature, rust preventative paint designed for metal. This is especially important when instal- lations are made in abnormally adverse or corro- sive environments; such as near lakes, oceans or in areas with consistently high humidity condi- tions. Consult the paint manufacturers instruc- tions for proper preparation and application. Figure 35 Less Than 10' 3' Min 2' Min. 10' 3' Min TEN FOOT RULE SUMMARY The minimum chimney height above the roof and/or to adjacent walls and buildings is speci- fied by all major building codes. If the horizontal distance from the peak of the roof is less then 10', the top of the chimney must be at least 2' above the peak of the roof. If the horizontal distance from the chimney edge to the peak of the roof is more than 10' a chimney height reference point is established on the roof surface 10' horizontally from the chimney edge. The top of the chimney must be at least 2' above this reference point. In all cases, the chimney cannot be less then 3' above the roof at the edge of the chimney. The 2' in 10' rule is necessary in the interest of safety but does not ensure smoke-free opera- tion. Trees, buildings, adjoining roof lines, adverse wind conditions, etc., may require a taller chimney should the fireplace not draft properly (seeFigure 35). MULTIPLE TERMINATIONS If more than one termination is located in the same chase or within the same general prox- imity, we suggest they should be separated in distance at least 24" horizontally from flue center to flue center and stacked or staggered vertically at least 18" apart, from the termina- tion of one smoke exit to the termination of another smoke exit (Figure 36). 18" 18" 24" 24" CTDT CTDT Figure 36 This suggestion is provided in the interest of better operation. If the terminations are located too close to each other, smoke may migrate from one flue into the other. FTF8 CHIMNEY COMPONE...
Questo manuale è adatto anche per i modelli :Altri accessori per la casa - Merit Series HCI-36-H (722.96 kb)