• Open frozen juices or foods in cardboard cans right from the freezer, while they are frozen. • Aluminum lids will not stick to the magnet. M USING THE KNIFE SHARPENER 1. For best results, sharpen the entire blade length in one continuous stroke. 2. Insert blade to be sharpened with the end of the blade closest to the handle on the knife into the sharpening slot. 3. Carefully press down on the blade and pull it toward you through the slot in one continuous stroke (N). Important: Do not saw knif

Note: If the height of your overhang molding is too tall to be accommodated by the number of spacers provided, you may call, toll-free, at 1-800-231-9786 to order additional spacers at no charge. Note: For spacer installation, you may require assistance in mounting in order to hold spacers in place while securing the appliance at the same time. If assistance is not available, use a small clamp to hold the spacers in place while you position the appliance. 15. Once spacers are set, hold appliance

• DO consider your normal work patterns in the kitchen when choosing location. • DO NOT mount over any heating or cooking appliance such as your range or oven. • DO NOT mount over or near a sink. • DO NOT mount under, in front of or behind any under-cabinet light fixtures. Note: If you are mounting multiple †SpaceMaker™ appliances, they should not be mounted flush to one another. Allow at least 4” of space between appliances for adequate cooling. Note: If you are connecting this appliance to the

4. After measuring the overhang molding thickness as shown in Illustration G, look at the dashed lines on the mounting template; each line has a measurement next to it that indicates the thickness of the overhang molding used with that line. For example, if your cabinet has an overhang molding thickness of .”, you will use the .” dashed line on the template. 5. Fold the template along the dashed line that matches the thickness of your overhang molding. 6. Place the folded template against the ba

Product may vary slightly from what is illustrated. El producto puede variar ligeramente del ilustrado. Le produit peut differer legerement de celui illustre. Applica Consumer Products, Inc. Listed by Underwriters Laboratories, Inc. Pub. No. 174835-00-RV01 Printed in People’s Republic of China Copyright © 1999-2000 Applica Consumer Products, Inc. Enlistado por Underwriters Laboratories, Inc. Impreso en la Republica Popular China Certifie par l’organisme Underwriters Laboratories, Inc. Imprime en

¦ Do not let the cord of the charging base hang over the edge of table or counter, or touch hot surfaces. Unit should be placed away from sink, hot surfaces, heating or cooking appliances. ¦ Do not use an extension cord. Plug charger directly into an electrical outlet. ¦ Do not attempt to use this charger with any other product. Likewise, do not attempt to charge the cordless can opener with any other charger. ¦ Do not open pressurized (aerosol-type) cans. ¦ Do not open cans of flammable liquids

These batteries must not be incinerated or composted. IMPORTANT: DO NOT ATTEMPT TO REMOVE THE PLASTIC COVERING FROM THE BATTERIES. Removal: 1. Remove blade assembly from the unit. (See “Care and Cleaning”). Use a small Phillips screwdriver to remove the screws on the unit and pry the two halves apart. You will see two barrel shaped batteries and connections. If the batteries have leaked or vented, wear protective gloves before touching them. 2. Disconnect negative (-) black wire from one battery

Before first use, you will need to charge the can opener for 24 hours. Subsequent charges as needed should be for 12 hours or overnight. When fully charged, the Gizmo™ cordless can opener is powered to open about a month’s worth of cans, based on 6 cans per week (one can – 20 seconds). 2. To charge the can opener, plug the small end of the AC adaptor into the can opener and plug the other end into a standard wall outlet. 3. Before charging again, make sure unit is fully discharged by removing it

3. Use the Mounting Bracket and a pencil to mark the location of the three holes to be drilled on the bottom of the cabinet. Use a hammer and nail (or center punch) to tap in starter holes at your pencil marks. 4 (Cover) Cover Figure D Figure E Start Release CAUTION: It is strongly recommended that you wear suitable eye protection such as goggles to prevent injury from shavings when using a drill. 4. With a 1/4”(6mm) drill bit, drill straight up through the bottom of the cabinet at your starter

• USE THE RIGHT UNIT – Do not use this unit for any job except that for which it is intended. • USE EXTRA CARE when cleaning on stairs. • DO NOT allow to be used as a toy. Close attention is necessary when used by or near children. Not recommended for use by children. • DO NOT attempt to clear clogs from unit without first removing battery. • USE ONLY as described in this manual. Use only manufacturer's recommended attachments. • DO NOT put any objects into openings. Do not use with any opening