valutazioni - 2, GPA: 4 ( )

Produttore : Hitachi File Size : 906.43 kb File Nome : 9d576d97-a757-41cc-bbe7-89805bae016b.pdf Lingua di insegnamento:

English ACCESSORIES WARNING: ALWAYS use Only authorized HITACHI replacement parts and accessories. NEVER use replacement parts or accessories which are not intended for use with this tool. Contact HITACHI if you are not sure whether it is safe to use a particular replacement part or accessory with your tool. The use of any other attachment or accessory can be dangerous and could cause injury or mechanical damage. NOTE: Accessories are subject to change without any obligation on the part of the HITACHI. STANDARD ACCESSORIES (1)Plastic Case (Code No. 323130) ...............................................................................1 (2)Side Handle (Code No. 303659)...............................................................................1 (3)Depth Gauge (Code No. 310331) .............................................................................1 OPTIONAL ACCESSORIES...........sold separately 1. Drilling anchor holes (Rotation + Hammering) . Drill Bit (Slender shaft) (1) Drill Bit (Slender Shaft) (2) Adaptor for slender shaft (SDS-plus shank) (1) Drill Bit (Slender Shaft) (2) Adaptor for Slender Shaft Outer diameter Effective Length Overall Length Code No. Code No. 1/8" (3.4 mm) 1-25/32" (45 mm) 3-35/64" (90 mm) 306369 3063709/64" (3.5 mm) 1-25/32" (45 mm) 3-35/64" (90 mm) 306368 English . Drill Bit (Taper shank) and taper shank adaptor Cotter (Code No. 944477) (1) Drill Bit (Taper Shank) (2) Taper Shank Adaptor (SDS-plus shank) External dia. Code No. 7/16" (11 mm) 944460 1/2" (12.3 mm) 944461 1/2" (12.7 mm) 993038 9/16" (14.3 mm) 944462 9/16" (14.5 mm) 944500 11/16" (17.5 mm) 944463 7/8" (21.5 mm) 944464 Taper mode Code No. Applicable drill bit 7/16" (11 mm) 1/2" (12.3 mm) Morse taper (No. 1) 303617 Drill bit (Taper shank) 1/2" (12.7 mm) 9/16" (14.3 mm) 9/16" (14.5 mm) 11/16" (17.5 mm) Morse taper (No. 2) 303618 Drill bit (Taper shank) 7/8" (21.5 mm) A-taper 303619 Taper shank adaptor formed A- taper or B-taper is provided as an optional accessory, but drill bit for it is not provided.B-taper 303620 . 1/2" (13 mm) Hammer Drill chuck and Chuck wrench For drilling operations when using a straight shank bit for impact driling with a rotary hammer 1/2" (13 mm) Hammer Drill Chuck (SDS-plus shank) (includes Chuck wrench) Impact Drill Application Straight shank Bit. . ... . Chuck wrench Name Code No. 1/2" (13 mm) Hammer Drill Chuck 303332 Chuck wrench 303334 Rubber Cap 303335 English 2. Knock-in anchor (Rotation + Hammering) Anchor Setter (for anchor setting) (SDS-plus shank) Anchor size W 1/4" (6.3 mm) W 5/16" (8 mm) W 3/8" (9.5 mm) Overall Length 10-1/4" (260 mm) 10-1/4" (260 mm) 6-1/4" (160 mm) 10-1/4" (260 mm) Code No. 302976 302975 303621 302974 Anchor size W 1/4" (6.3 mm) W 5/16" (8 mm) W 3/8" (9.5 mm) Overall Length 10-1/4" (260 mm) 10-1/4" (260 mm) 6-1/4" (160 mm) 10-1/4" (260 mm) Code No. 302979 302978 303622 302977 Anchor setting adaptor (for manual hammer) the headless screw> Anchor size Code No. W1/4" (6.3 mm) 971794 W5/16" (8 mm) 971795 W3/8" (9.5 mm) 971796 W1/2" (12.7 mm) 971797 W5/8" (15.9 mm) 971798 Anchor size Code No. W1/4" (6.3 mm) 971799 W5/16" (8 mm) 971800 W3/8" (9.5 mm) 971801 W1/2" (12.7 mm) 971802 W5/8" (15.9 mm) 971803 English 3. Large hole boring (Rotation + Hammering) Guide Plate Center pin Core Bit Core bit Shank (SDS-plus shank) Center pin Code No. Core bit (outer diameter) Code No. Core bit shank Code No. – – (A) 1"(25 mm) 982672 (A) Overall length 3036251-1/8" (29 mm) 982673 4-1/8" (105 mm) (A) 982684 1-1/4" (32 mm) 982674 1-3/8" (35 mm) 982675 12" (300 mm) 3036261-1/2" (38 mm) 982676 (B) 982685 (B) 1-3/4" (45 mm) 982677 (B) 12" (300 mm) 3036272" (50 mm) 982678 Guide plate Core bit (outer diameter) Code No. Core bit (outer diameter) Code No. 1-1/4" (32 mm) 982686 1-3/4" (45 mm) 982689 1-3/8" (35 mm) 982687 2" (50 mm) 982690 1-1/2" (38 mm) 982688 4. Crushing operation (Rotation + Hammering) Bull point (Round type only) (SDS-plus shank) Code No. 303046 English 5. Bolt placing operation with Chemical Anchor (Rotation + Hammering) Standard socket(on the market ) (SDS-plus shank) 1/2" (12.7 mm) Chemical Anchor Adapter (Code No.303044) 3/4" (19 mm) Chemical Anchor Adapter (Code No. 303045) 6. Drilling holes and driving screws (rotation only) . Drill chuck, chuck adaptor and chuck wrench Special screw Code No. 981122 Drill chuck (13VLRB–D) (includes chuck wrench) Code No. 321814 Chuck adaptor (G) (SDS-plus shank) Code No. 303623 Chuck wrench 7. Drilling holes (rotation only) Drill chuck (13VLD–D) (includes chuck wrench) Code No. 321813 Chuck adaptor (D) (SDS-plus shank) Code No. 303624 Chuck wrench . 1/2" (13 mm) drill chuck ass’y (includes chuck wrench) and chuck (for drilling into steel or wood). English 8. Driving Screws (rotation only) Bit No. Chuck adaptor (D) (SDS-plus shank) Code No. 303624 Phillips Driver Bit Bit No. Screw S...

Scarica la tua

Per scaricare, digitare 2 cifre :