valutazioni - 2, GPA: 5
(
)
)
|
Facilità d'uso
Close attention is necessary when used near children. 5. Use only as described in this manual. Use only manufacturer’s recommended attachments. 6. Do not use with damaged cord or plug. If Dust Collector is not working as it should, has been dropped, damaged, left outdoor, or dropped in water, return it to a service center. 7. Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not run Dust Collector over cord. Keep cord away from heated surfaces. 8. Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord. 9. Do not handle plug or Dust Collector with wet hands. 10. Do not put any objects into the openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce airflow. 11. Keep hair, loose clothing, fingers, and all parts of body away from opening and moving parts. 12. Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes. 13. Do not use without dust bag and/or filters in place. 14. Turn off all controls before unplugging. 15. Use extra care when cleaning on stairs. 16. Do not use to pick up flammable or combustible liquids such as gasoline or use in areas where they may be present. 17. Do not operate without hose connected to the hose inlet. Hazardous moving parts inside. Unplug before removing hose inlet or impeller guard. 18. Some dust created by power sanding, sawing, grinding, drilling and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: • Lead from lead based paint • Crystalline silica from bricks and cement and other masonry products, and • Arsenic and chromium from chemically-treated lumber. 19. Your risk from those exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specifically designed to filter out microscopic particles 20. Do not operate tool while under the influence of drugs, alcohol or any medication. 21. Make sure the extension cord is in good condition. When using an extension cord, be sure to use one heavy enough to carry the current your product will draw. An undersize cord will cause a drop in the line voltage resulting in loss of power and overheating. The table below shows the correct size to use depending on cord length and nameplate ampere rating. If in doubt, use the next heavier gauge. The smaller gauge number, the heavier the cord. 22. Static electricity will build up in the filter during operation. The filter ground must be attached to the machine ground, and to the filter. Cord Length 25' 50' 100' 150' Cord Gauge 16 AWG 16 AWG 14 AWG 12 AWG SAVE THESE INSTRUCTIONS 3 Grounding Instructions Caution: This tool must be grounded while in use to protect the operator from electric shock. In the event of a malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This tool is equipped with an electric cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into a matching outlet that is properly installed and grounded in accordance with all local codes and ordinances. Do not modify the plug provided. If it will not fit the outlet, have the proper outlet installed by a qualified electrician. Improper connection of the equipment-grounding conductor can result in a risk of electric shock. The conductor, with insulation having an outer surface that is green with or without yellow stripes, is the equipment-grounding conductor. If repair or replacement of the electric cord or plug is necessary, do not connect the equipment-grounding conductor to a live terminal. Check with a qualified electrician or service personnel if the grounding instructions are not completely understood, or if in doubt as to whether the tool is properly grounded. Use only three wire extension cords that have three-prong grounding plugs and three-pole receptacles that accept the tool’s plug. Repair or replace a damaged or worn cord immediately. 115 Volt Operation As received from the factory, your dust collector is ready to run at 115 volt operation. This dust collector, when wired for 115 volt, is intended for use on a circuit that has an outlet and a plug that looks like the one illustrated in (A). A temporary adapter, which looks like the adapter as illustrated in (B), may be used to connect this plug to a two-pole receptacle, as shown in (B) if a properly grounded outlet is not available. The temporary adapter should only be used until a properly grounded outlet can be installed by a qualified electrician. This adapter is not applicable in Canada. The green colored rigid ear, lug, or tab, extending from the adapter, must be connected to a per...