valutazioni - 4, GPA: 3.3
(
)
)
|
Facilità d'uso
Occasionally we pre-install certain components for shipping purposes. Contents (Figures 7 & 8) Qty A. Collectors ................................................... 2 B. impeller Housing with Motor.......................1 C. Casters.......................................................4 D. Leg Braces.................................................4 E. Legs............................................................ 4 F. Gaskets ...................................................... 2 G. 4-in-1 inlet Adapter.....................................1 H. Hangers......................................................2 I. Hanger Supports ........................................ 2 J. Lower Collection Bags, G0671 (fabric).......2 J. Lower Collection Bags, G0672 (plastic).....2 K. Upper Filter Bags (fabric)...........................2 Fasteners (where used) (not shown) Qty • Hex Bolts 5/i6"-18 x 2V2" (legs)....................8 • Hex Nuts 5/i6"-18 (legs/collectors).............24 • Hex Bolts 5/i6"-18 x 1/2" (leg braces)..........16 • Hex Bolts 5/i6"-18 x 1" (collectors).............16 • Hex Bolts 1/4"-20 x 1/2" (hangers).................6 • Flat Washers W (collectors)...................32 • Phillips Head Screw 10-24 X 3/8" (inlet)......1 • Bag Clamps (bags).....................................4 H IJ* 3 □ * [Utms^ucfi J Imtumtrlal, inc. • E IK Figure 8. G0671/G0672 inventory 2. if any nonproprietary parts are missing (e.g. a nut or a washer), we will gladly replace them; or for the sake of expediency, replacements can be obtained at your local hardware store. -18- G0671/G0672/G0673 Dust Collector G0673 Inventory The following is a description of the main components shipped with your machine. Lay the components out to inventory them. Note: If you can't find an item on this list, check the mounting location on the machine or examine the packaging materials carefully. Occasionally we pre-install certain components for shipping purposes. Contents (Figures 9-11) Qty A. Collectors...................................................4 B. 5-in-1 inlet Adapter ..................................... 1 C. G0673 impeller Housing with Motor...........1 D. Legs............................................................ 4 E. Leg Braces.................................................4 F. Casters.......................................................4 G. Upper Filter Bags (fabric)...........................4 H. Lower Collection Bags (plastic)..................4 I. Hangers ...................................................... 4 J. Hanger Supports ........................................ 4 K. Rubber Gaskets ......................................... 4 L. Bag Clamps................................................8 Fasteners (where used) (not shown) Qty • Hex Bolts 5/i6"-18 x 2V2" (legs)....................8 • Hex Nuts 5/i6"-18" (legs/collectors)............40 • Hex Bolts 5/i6"-18 x V2" (leg braces)..........16 • Hex Bolts 5/i6"-18 x 1" (collectors).............32 • Hex Bolts 1/4"-20 x 1/2" (hangers)...............12 • Flat Washers W (collectors)...................64 • Phillips Head Screw 10-24 X 3/8" (inlet)......1 Figure 11. G0673 inventory 3. if any nonproprietary parts are missing (e.g. a nut or a washer), we will gladly replace them; or for the sake of expediency, replacements can be obtained at your local hardware store. Figure 9. G0673 inventory 1. G0671/G0672/G0673 Dust Collector -19- Hardware Recognition Chart USE THIS CHART TO MATCH UP HARDWARE DURING THE ASSEMBLY PROCESS. LU *10 V411 Vie Hex Wrench CD Cap Screw W' 4mm 10mm 12mm 16mm External Retaining Ring Flat Washer 5mm 10mm 15mm 20mm 25mm 30mm 35mm 40mm 45mm 50mm 55mm 60mm 65mm 70mm 75mm -20- G0671/G0672/G0673 Dust Collector Site Considerations Assembly Floor Load Refer to the Machine Data Sheet for the weight and footprint specifications of your machine. Some residential floors may require additional reinforcement to support both the machine and operator. Placement Location Consider existing and anticipated needs, size of material to be processed through each machine, and space for auxiliary stands, work tables or other machinery when establishing a location for your new machine. See Figure 12 for the minimum working clearances. and suggested clearances. Acaution Children and visitors may be seriously injured if unsupervised around this machine. Lock entrances to the shop or disable start switch or power connection to prevent unsupervised use. To assemble the dust collector: 1. With assistance, place the impeller housing on the floor so that the motor is pointing up. 2. insert the legs into the leg mounting brackets and secure them with the eight 5/6"-18 x 21/2" hex bolts and 5/16"-18 hex nuts, as shown in Figure 13. Do not yet fully tighten the nuts. (Model G0673 shown). 3. Attach the four leg braces to the legs with the (16) 5/6"-18 x V2" hex bolts, as shown in Fig...
Questo manuale è adatto anche per i modelli :Altri strumenti - G0672 (6.56 mb)
Altri strumenti - G0673 (6.56 mb)