valutazioni - 3, GPA: 4.3
(
)
)
|
Facilità d'uso
ABS10W-020830 066640034 1 SINGLE Rechargeable Head Lamp ABS-10 Instruction Manual E 1 2 8-10 Standard Charging Time hours CO.,LTD. Lamp Unit Bracket (H-32) Rubber Pad Battery Charger Battery Belt (L/S) Battery Pack Cable Cover Battery Pad Switch Unit Holder Mounting Bolts (L x 2, S x 2) Bracket (H-32) Holder Lever Switch Unit Velcro Rubber Pad Quick lever screw or Holder mounting bolts Holder Battery Pack Strap Holder When attaching to bottle cage Attach the holder onto the down tube using the holder mounting bolts (L or S). When attaching to frame Fix the battery pack firmly to the frame, using the battery belts. Cut the battery pad and fit it between the top tube and the battery, so that the battery will not move when riding. How to run the battery belt through the slot Cable Cover Cable Top Tube Ring Battery pack Battery Belt Battery Pad Battery Pack Jack Cord belt Plug Switch Unit Plug Joint Cord #533-8783 Release Quick release lever Pad There is a pad inside of the jack socket to prevent the plug from falling off the socket. When this pad is deteriorated and you feel the plug's connection is loose, replace the pad with a new one. ¦RECHARGING INSTRUCTIONS The home power outlet Charge indicator ¦HOW TO REPLACE THE BULB Disassemble the lamp unit as illustrated. Bulb #533-8670 ABS Switch Unit #533-8795 ABS Jack Packing #533-8783 ABS Joint Cord #533-8880 Bracket (H-32) #533-8671 ABS Holder #533-8785 ABS Double Holder #533-8790 ABS Battery Pack #533-8784 ABS Battery Belt #534-0582 10W #534-0589 6V ABS Wide Bulb ABS Lamp Body ABS Battery Charger #533-8676 for U.S.A & Canada #533-8674 for Europe #533-8675 for AS #533-8672 for UK Frame Velcro CLICK! CLICK! CLICK! Fit inside Wind stape SAFE OPERATIONS (IMPORTANT) • Never short-circuit the terminal of the battery pack and the plug of the battery charger. It may cause the battery to over heat, resulting in fire or damage of the components. • Securely connect the plug so that the light will not turn off while riding, or the cord will not hinder riding. • Never use the ABS if the cord of the battery charger or the switch unit is damaged, Consult with the shop where this lamp kit was purchased. • The lamp body becomes extremely hot when turned on. Never touch the lamp body or the lens until thoroughly cooled. Injury may result. • Use only the designated battery charger for charging. • Never mix different types of battery packs. • Safely and properly dispose of the old battery according to your local regulations when it comes to the end of its useful life. • This lamp kit is not intended for use by young children or infirm persons without supervision. Young children should be supervised to ensure that they do not play with this applince. • The battery’s nature will affect the light output, High light output will remain just before the battery runs out, After that the output drops suddenly. Take precautions against such a situation and prepare a spare light or spare battery packs. • Long periods of non-use will lower the voltage of the battery and will naturally self discharge. Always charge the battery before using. • Overdischarge (leaving the light on after the power is completely gone) shortens the performance life of the battery. • If the lamp body or parts become dirty with mud, etc., clean with a soft cloth which is moistened with mild soap. Never apply paint thinner, benzine or alcohol; damage will result. ¦HOW TO SETUP Attach the bracket (H-32) to the handlebar. Turn over the quick lever and it is fastened. Slide the lamp units onto the brackets. To remove the lamp body, slide it forward while pushing the lever. Note: Use the quick lever to adjust 10° horizontally. Warning!!! When removing the lamp body, make sure that it has been cooled. Attach the switch unit onto the handlebar where it will not hinder the braking and shifting operation. Connecting Battery Pack and Cord Choose your favorite location to attach the battery packs. Connecting Cord Connect the battery pack, joint cord and the switch unit as illustrated. Attention: • Secure the cord along the frame with the cord belt, so that it will not hinder riding. • Wind the cord round the frame so that it will not hinder riding. • Securely connect the jacks to the plug. Note: You can connect one more battery pack (available as an optional part). This way the run time will be double. For this connection, the Double Holder (#533-8785) is recommended. Caution: In this double connection, the two batteries must be evenly discharged. Do not mix batteries that are in different states of charge. ¦HOW TO SWITCH ON/OFF The switch unit controls the operation of the lamps. Run Time: 1.5 hrs Note: The run time shown here is the calculated figure. • The beam angle must be downwards. • To adjust the angle of the lamp unit, use the quick lever. READ ALL INSTRUCTIONS BEFORE FIRST USE Thank you for purchasing the CAT EYE ABS Advanced Battery System, a unique 6 volt rechargeable head lamp series. ABS-10 is a combination system...