2. Attach bagger mount plate to rear of engine guard. Use four 5-16-18 x 3/4" carriage bolts and four 5/16-18" nyloc nuts. Refer to illustration. 3. Attach a bagger strap to side hole in bagger mount plate. Use 3/8-16 x 1" carriage bolt, 3/8" washer and 3/8-16" nyloc nut. Attach other end of bagger brace to top front hole in engine guard, using existing frame hardware. Refer to Figure 1. Repeat for other side of machine. MOUNT PLATE STRAP STRAP 8050-161 1. To prevent damage to grass bags, remove

IR (02/20/07) Operators Manual Models: Please read these instructions carefully and make sure you understand them before using the machine. Parts Manual Collection System 114892 - DCR2 114893 - DCK2 SAFETY RULES SAFE OPERATION PRACTICES FOR RIDE-ON MOWERS DANGER ! THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEETAND THROWING OBJECTS. FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH. I. GENERAL OPERATION • Read, understand and follow all inst

539 114865 REV IR (01/30/07) Parts Manual Collection System 2 ©2007 Dixon. All Rights Reserved. Beatrice, NE. Printed in U.S.A. 3 INDEX Operators Guide Features and Controls.............................................................. 4 General Information ................................................................. 5 Safety Procedures.................................................................... 5 Unpacking Instructions ............................................................. 7