valutazioni - 2, GPA: 4.5
(
)
)
|
Facilità d'uso
The tanning lamps emit sufficient infrared to provide a comfortable warmth. A timer ensures that each session does not last longer than 45 minutes. Just as with natural sunlight, overexposure must be avoided (see the chapter ‘Tanning and your health’). general description (Fig. 1) A Wheels B Mains cord in storage compartment C Handgrip D Timer E Memory knobs (for two persons) F Slides G Stand H Locking collar for height adjustment I Locking collar for lamp unit J Handgrip K Fan (cooling) L Lamp unit M UV filter N Tanning lamps (type Philips HPA flexpower 400-600) O Reflector P Measuring tape Q Protective goggles (2 pairs) -(type no. HB071/service no. 4822 690 80123) R Base S Type plate important ,, , , , ,,,,,, , ,, ,, , , , ,, ,,,,,, , Read these instructions for use carefully before using the appliance and save them for future reference. Check if the voltage indicated on the appliance corresponds to the mains voltage in your home before you connect the appliance. The appliance must be connected to a circuit that is protected with a 16A standard fuse or a slow-blow automatic fuse. If the wall socket used to power the appliance has poor connections, the plug of the appliance will become hot. Make sure you plug the appliance into a properly connected wall socket. If the mains cord is damaged, it must be replaced by Philips, a service centre authorised by Philips or similarly qualified persons in order to avoid a hazard. Water and electricity are a dangerous combination! Do not use this appliance in wet surroundings (e.g. in the bathroom or near a shower or swimming pool). If you have just been swimming or have just taken a shower, dry yourself thoroughly before using the appliance. Make sure children do not play with the appliance. Always unplug the appliance after use. Let the appliance cool down after use for approx. 15 minutes before folding it back into transport position and storing it. Only move the appliance when it is in transport position. Make sure the vents in the lamp unit and in the base remain open during use. Keep your hair away from the air inlet of the lamp unit. The appliance has been fitted with an automatic protection against overheating. If the appliance is insufficiently cooled (e.g. because the vents are covered), the appliance will switch off automatically. Once the cause of overheating has been removed and the appliance has cooled down, the appliance will switch on automatically again. The appliance contains hinging parts, so be careful not to get your fingers stuck between these parts. Do not exceed the recommended tanning time and the maximum number of tanning hours (see ‘Tanning sessions: how often and how long?’). Do not choose a tanning distance of less than 65 cm. Do not tan a particular part of your body more than once a day.Avoid excessive exposure to natural sunlight on the same day. Do not take a tanning session if you have a disease and/or use medication or cosmetics that increase the sensitivity of your skin. Be extra careful if you are hypersensitive to UV light. Consult your doctor in case of doubt. Do not use the tanning appliance and consult your doctor if unexpected effects such as itching occur within 48 hours after the first session. The appliance is not to be used by people who get sunburnt without tanning when exposed to the sun, by persons suffering from sunburn, by children, or by persons who suffer (or have previously suffered) from skin cancer or who are predisposed to skin cancer. Consult your doctor if persistent lumps or sores appear on the skin, or if there are changes in pigmented moles. Always wear the protective goggles provided with the appliance while tanning to protect your eyes against overexposure (also see the chapter ‘Tanning and your health’). Remove creams, lipstick and other cosmetics well in advance of a tanning session. Do not use any sunscreens or suntan accelerators. If your skin feels taut after the tanning session, you may apply a moisturising cream. Never use the appliance when the UV filter is damaged, broken or missing or when the timer is defective. The UV filter becomes hot during the tanning session. Do not touch it. Colours may fade under the influence of the sun.The same effect may occur when using this appliance. Do not expect the appliance to yield better results than the natural sun. EngliSH Electromagnetic fields (EMF) This Philips appliance complies with all standards regarding electromagnetic fields (EMF). If handled properly and in accordance with the instructions in this instruction manual, the appliance is safe to use according to scientific evidence available today. tanning and your health Just as with natural sunlight, the tanning process will take some time.The first effect will only become visible after a few sessions (see chapter “Tanning sessions: how often and how long?”). Overexposure to ultraviolet light (natural sunlight or artificial light from your tanning appliance) can cause sunburn. Besides many other fac...