Custom Color Balance. Select custom Red & Blue gain with the control stick and press ENTER to start the adjustment. Push the control stick forward or backward to adjust the red gain and push the control stick to the left or to the right to adjust the blue gain. A bar scale indicates the amount of adjustment. Select custom Green gain with the control stick and press ENTER to start the adjustment. Push the control stick forward or backward to adjust the green gain. Select custom R & B cut off with the control stick and press enter to start the adjustment. Push the control stick forward or backward to adjust the red cut-off and push the control stick to the left or to the right to adjust the blue cut-off. Select custom Green cut off with the control stick and press enter to start the adjustment. Push the control stick forward or backward to adjust the red cut-off EXIT returns to the Picture tuning menu. Random access adjustment mode selection menu. This is the main menu for the Random Access adjustment mode. Through this menu, the following adjustments and features are accessible : - Picture Tuning Enhanced Blue (only for RGB) Sync slow/fast(video/s-video) Color Balance - Focusing - Geometry - Convergence - Color select And also Orbiting, Contrast modulation and Soft Edge if these options are installed. Picture Tuning Highlight Picture tuning by pushing the control stick forward or backward and press ENTER. The Picture tuning menu will be displayed. Depending on the input source, the Picture tuning menu will display different items. For Video input sources : Color Balance Line Doubler Port 2 : Video or S-Video (only when source 2 is selected) For RGB analog sources : Color Balance Sync slow/fast Peaking Clamp Tuning for Component input and RGB on 15 kHz. Color Balance Sync slow/fast Peaking Clamp Tuning Line Doubler (option) Color Balance COLOR BALANCE FIXED COLOR BALANCE 3200 4900 6500 9300 CUSTOM RED & BLUE GAIN CUSTOM GREEN GAIN CUSTOM RED & BLUE CUT OFF CUSTOM GREEN CUT OFF Select with arrow keys then Red & Blue : adjust red with or Blue with or to return Random Access Adjustment Mode 5975007 BARCOGRAPHICS 808S 051196 6-5 Sync Fast/Slow Adjustment The sync function is used to minimize horizontal jittering or tearing at the top to the displayed image. Highlight SYNC by pushing the control stick forward or backward and press ENTER to toggle between FAST and SLOW. Note: SYNC is normally used in the SLOW position. For Video and S-Video the sync is automatically set to FAST. Select with or to accept to return. PICTURE TUNING COLOR BALANCE SYNC : FAST PEAKING CLAMP TUNING : normal LINE DOUBLER ENTER will toggle Sync between FAST and SLOW EXIT will return to the random access selection menu Select with or to accept to return. PICTURE TUNING COLOR BALANCE SYNC : FAST PEAKING CLAMP TUNING : normal LINE DOUBLER Select with or then to return. PEAKING OFF LOW FREQUENCY MID FREQUENCY HIGH FREQUENCY Clamp Tuning Highlight CLAMP TUNING by pushing the control stick forward or backward and press ENTER to toggle between NORMAL and RESTORATION. Select Normal : - for all standard sources and all sources with a backporch > 0.8.s, - for sources with noise and spikes in the signal. Select Restoration : - for standard sources with a backporch between 0.4 .s and 0.8 .s, - for sources with sync separate or sync on Green. Select with or to accept to return. PICTURE TUNING COLOR BALANCE SYNC : FAST PEAKING CLAMP TUNING : normal LINE DOUBLER :ON Peaking Peaking improves the contours in an projected image. Highlight PEAKING by pushing the control stick forward or backward and press ENTER to display the peaking menu. During the creation of new settings for a RGB source the corresponding peaking is switched on as default. For frequencies between : 15 kHz - 45 kHz : Low frequency peaking 45 kHz - 85 kHz : Mid frequency peaking 85 kHz - 110 kHz :High frequency peaking If another peaking is desired, use the control stick to highlight 'low', 'mid' or 'high' frequency or to switch off the peaking. Random Access Adjustment Mode 6-6 5975007 BARCOGRAPHICS 808S 051196 Port 2 : Video or S-Video Port 2 can be used as a Video or S-Video input. Highlight Port 2 by pushing the control stick forward or backward and press ENTER to toggle between VIDEO and S-VIDEO. Select with or to accept to return. PICTURE TUNING COLOR BALANCE PORT2 : S-VIDEO LINE DOUBLER : ON Line Doubler (option) Line doubling is only possible for Video, S-Video, Component Video images on standard line frequency and RGB signals on 15 kHz. To eliminate the video line patterns and to improve the image stability, the line doubler has to be switched on. The line doubler is default set in the ON position when starting up for the first time. The setting of the line doubler will be saved together with the source number. Each time this source number is selected, the last saved version will be loaded. Hi...
)
