|
Facilità d'uso
Please see page 3 of the Model 1700 Owner’s Manual.) TO ADJUST THE MODEL 1700 DEHUMIDIFIER SET POINT Press the buttons to ADJUST the dryness level set point for the Model 1700 Dehumidifier. When either of the buttons is first pressed, the display will show “MORE DRY” and “LESS DRY” on the display with the current set point. For increased dehumidification, pressing the button will increase the dryness level towards “MORE DRY”, up to a maximum of 7 bars. When the button is pressed, “LESS DRY” disappears from the display and only “MORE DRY” is displayed. Each button depression will add 1 bar to the display. OR For decreased dehumidification, pressing the button will decrease the dryness level towards “LESS DRY”, down to a minimum of 1 bar. When the button is pressed, “MORE DRY” disappears from the display and only “LESS DRY” is displayed. Each button depression will remove 1 bar from the display. Based on the thermostat set point, use the following table to determine the set point to reach a desired RH value. The Model 1700 Dehumidifier will work to achieve these values. EXAMPLE: At an indoor temperature of 75°F with a Indoor Temperature (°F) Bar Display Set Point 65 70 75 %RH (± 5%) based on Set Point Bar Display and Indoor Temperature 1 BAR – “LESS DRY” 84% 71% 2 BARS 86% 73% 61% 3 BARS – “NORMAL” 74% 63% 53% 4 BARS 64% 54% 45% 5 BARS 55% 46% 39% 6 BARS 47% 39% 33% 7 BARS – “MORE DRY” 40% 34% 28% setting of 3 BARS – NORMAL, 80 the dehumidifier will work to 60% achieve an RH value of 53%. NOTES: 52% 1. %RH values are ±5% and 45% are to be used as a GUIDE 39% ONLY for initial set-up. 33% 2. Indoor Temperature is 28% measured by the Model 70 Living Space Control. 24% NOTE: In the event of a power failure, the Living Space Control will hold the last set point level in memory indefinitely. CLEANING THE LIVING SPACE CONTROL If the surface of the Living Space Control becomes dirty, it can be cleaned with plain water or a non-abrasive household cleaner, including glass cleaner. When using any cleaner, be careful not to get any into the interior of the control. Do not spray any liquid directly onto the control. Spray the cleaner onto a soft cloth and wipe the surface of the control gently. IV. LIMITED WARRANTY Your Research Products Corporation Aprilaire® Model 70 Living Space Control is expressly warranted for two (2) year from date of installation to be free from defects. Research Products Corporation’s exclusive obligation under this warranty shall be to supply, without charge, a replacement for the Living Space Control which is found to be defective within two (2) year period and which is returned not later than thirty (30) days after said two (2) year period by you to either your original supplier or to Research Products Corporation, Madison, Wisconsin 53701, together with the installation date of the Living Space Control. THIS WARRANTY SHALL NOT OBLIGATE RESEARCH PRODUCTS CORPORATION FOR ANY LABOR COSTS AND SHALL NOT APPLY TO DEFECTS IN WORKMAN...
Questo manuale è adatto anche per i modelli :Proiettori - IN72 (113.57 kb)
Proiettori - IN76 (113.57 kb)