valutazioni - 3, GPA: 3.7
(
)
)
|
Facilità d'uso
Refer to page 28 for further details. • If this button is pressed while some other on-screen display is on the screen, the adjustment level and the bar scale will not be displayed but the adjustment operation will still work. -24- □ Turning off the sound If the MUTE button on the remote control unit is pressed, “MUTE” will be displayed on the screen as shown in the illustration below and the sound will be muted. If the MUTE button is pressed once more, the on-screen display will be cleared and the normal sound volume will be restored. The volume output level will remain displayed on the screen for approximately three seconds. NOTE: • If the MUTE button is pressed while the on-screen display for another function is currently on the screen, the volume will still be muted but the “MUTE” on-screen display will not appear. • If the power supply is turned off or either of the VOL (+/-) buttons is pressed, the mute setting will be canceled. • It is also possible to have the picture turn off together with the sound when the MUTE button is pressed. Refer to page 38 for details on how to change this setting. When the picture has been turned off in this way, the words “PICTURE MUTE” will be displayed on the screen. Remote control unit PICTURE MUTE Selecting the picture mode In order to obtain better picture quality, two types of picture mode are available for VIDEO/S-VIDEO signals and RGB signals. Use the procedure given below to select the desired mode (NATURAL/DYNAMIC). Setting procedure 1. Press the MENU button.... The MENU screen will be displayed. 2. Use the “A” and “T” arrow buttons to move the cursor to “PICTURE”. 3. Press the ENTER button.... The PICTURE screen will be displayed. 4. Use the “A” and arrow buttons to move the cursor to “PICTURE MODE”. 5. Use the “ and arrow buttons to switch the setting to “NATURAL” or “DYNAMIC” until the best picture is obtained. NATURAL: The picture obtained is appropriate when using this projector in places with standard brightness. DYNAMIC: The picture obtained is appropriate when using this projector in brighter places. 30L0R IfflillÆ«! BRI G H T 3QNTRAST 5. Press the ENTER, a<” or button to display the COLOR individual adjustment screen. 6. Continue pressing the and buttons to adjust the color. The current setting will be displayed on the screen by numerals and a bar. • The adjustment operation and the changes made will vary depending on which adjustment item is selected. Refer to the table below for details. Adjustment function display / Numeric adjustment level display Bar display Adjustment Item Button Adjustment Details Adjustment Range Remarks COLOR Press the button. The color becomes vivid. Max. value 63 S-VIDEOA/IDEO /YPbPr only Press the button. The color becomes pastel. Min. value 0 TINT Press the button. Flesh tones become greenish. Max. value 63 NTSC, NTSC 4.43 (S-VIDEO/VIDEO)only Press the u<” button. Flesh tones become reddish. Min. value 0 BRIGHT Press the button. The screen becomes brighter. Max. value 63 Press the “M” button. The screen becomes darker. Min. value 0 CONTRAST Press the button. The bright portion of the picture becomes brighter. Max. value 63 Press the button. The bright portion of the picture becomes darker. Min. value 0 SHARPNESS Press the button. The picture details becomes sharper. Max. value 7 S-VIDEOA/IDEO only Press the button. The picture details becomes softer. Min. value 0 NOTE: • If no button is pressed for approximately 5 seconds while an individual adjustment screen is being displayed, the display will return to the PICTURE screen. • If the MENU button is pressed, the display will return to the MENU screen, or the MENU screen will be cleared if it is already being displayed. • Refer to page 23 for details on the TV-SYSTEM settings which appear in the PICTURE screen,...