Istruzioni per l'uso Samsung, Modello SP-L221
Produttore : Samsung File Size : 1.5 mb File Nome :
Lingua di insegnamento:
Vai a scaricare
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
• -- Test Pattern Generated by the projector itself. Use to optimize the installation of the projector. • : You can check whether the picture is distorted or not. • : You can refer to picture format sizes such as 1.33 : 1 or 1.78 : 1. Using 3-5 MENU DESCRIPTION Video Type Caption If the screen quality is abnormal as a result of the projector not identifying the input signal type automatically in or mode, you can manually set the input signal. m In mode, is only enabled if the input signal is AV Timing (D-Sub). However, for a separate H/V sync., is only enabled for the 1280 x 720p 59.94 Hz/60 Hz signals. In mode, is only enabled for the 640x480p 59.94Hz/60 Hz and 1280x720p 59.94Hz/60 Hz signals. --- : mode -- : mode Usage Color, Sharpness,Tint PC menu and zoom RGB(PC) When connecting the RGB output of a PC to the D-Sub terminal Disabled Enabled RGB(AV) When connecting the RGB output of an AV device (STB, DVD, etc--) to the D-Sub terminal Enabled Enabled YPbPr(AV) When connecting the YPbPr output of an AV device (STB, DVD, etc--) to the D-Sub terminal Enabled Disabled PC When connecting a PC to the HDMI terminal Disabled Enabled AV When connecting an AV device (STB, DVD, etc--) to the HDMI terminal Enabled Disabled Auto Auto settings - - The function is supported when subtitles are contained in the external analog signal (from either the Video or S-Video terminal). E3 The function will not operate in (including components) or mode. E3 Depending on the external signal, a change to the channel or settings may be required. E3 Each and contains different information. <2> carries additional information to supplement information contained in <1>. (e.g. If English subtitles are provided on <1>, Spanish subtitles will be provided on <2>.) • : - • : - • : <1>-<2> • : <1>-<2> Reset Using this function, you can reset various settings to the factory default settings. • : Changes the settings to the factory defaults. • : Resets the filter time. 3-5 Using DO 3-5-4. Option Language Menu Option Sound Filter Check Time Auto Power On Sleep Timer Information E1 Enter O Exit MENU DESCRIPTION Language You can select the language used for the menu screen. Menu Option • : You can move Menu Position up/down/left/right. • : You can set the translucency of the menu. • --- • : You can set the display time of the menu. • <5 sec>-<10 sec>-<30 sec>-<60 sec>-<90 sec>-<120 sec>- Sound Adjusts the right and left audio balance and equalizer of the 3W stereo speaker embedded in the projector. • -<100Hz>-<300Hz>-<1kHz>-<3kHz>-<10kHz> Filter Check Time Sets the check period for the filter. (Unit: hour) • -<100>-<200>-<400>-<800> ¡3 If the filter usage time is larger than the filter check period, the filter check message is displayed for a minute whenever the projector is turned on. E3 Filter check message: "Check the filter, and if necessary, clean or replace it.". Auto Power On With Auto Power On, if power is supplied to the projector, it turns on automatically without your pressing the Power button. • - Sleep Timer With Sleep Timer on, if there is no input signal for the specified time, the projector turns off automatically. (There must be no button input from the remote control or the top of the projector for the specified time) • -<10 min>-<20 min>-<30 min> Information You can check external source signals, picture setup, PC picture adjustment. Using 3-5 4 Troubleshooting 4-1 Before Requesting Service ЕЭ Please check the following before requesting After-Sales service. If the problem continues, please contact your nearest Samsung Electronics Service Center. Symptoms Troubleshooting Installation and Connection No Power. Check the power cable connections. I want to install my projector on the ceiling. The ceiling installation support is sold separately. Contact your local product distributor. External Source can not be selected. Be sure that the connection cable(s) (video) is properly connected to the proper port. If the device is not connected properly, it can not be selected. Menu and Remote Control Remote control does not work. Be sure that the proper external source is selected. Check the battery in the remote. If there is something wrong with it, replace it with a new battery of the recommended size. Be sure to aim the remote at sensor on the back of the unit and at a distance of no more than approximately 23 feet(7 m). Remove any obstacles between your remote control and the product. Direct light from 3-way light bulbs or oth...
Questo manuale è adatto anche per i modelli :
Proiettori - SP-L201 (1.5 mb)
Proiettori - SP-L251 (1.5 mb)
Scrivi la tua opinione del dispositivo
)
Log: