valutazioni - 4, GPA: 3.3
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
Avoid using any chemicals such as detergents, industrial or automotive polish, abrasive, wax, benzene, alcohol on any plastic part of the product such as projector case, since this may cause damage. Do not use any undesignated battery. The ventilation hole is hot for some time though the projector is turned off. Keep you hands or body off the ventilation hole. Be careful to keep your body away from the projector lamp. The lamp is hot. (Children and those who have sensitive skin should be more careful.) The lens cover protects the lens and should be used when the projector is turned off. • To hide the screen while the projector is turned on, use the BLANK feature. Major Safety Precautions 1-3 2 Installation and Connection 2-1 Package Contents E9 • Unpack the product and check if all of the contents listed below have been included. • Store the packaging box in case you need to move the product at a later date. Projector CONTENTS Quick Installation Guide Warranty Card / Registration Card (Not available in all locations) User Manual Power Cord Remote Control / 1 Battery (Not available in all locations) Cleaning Cloth D-Sub Cable Lens cover 4 Screws (For bracket of ceiling mount.) Projector case S3 A ceiling mount is not included and must be purchased separately. Use the included screws to attach the projector to the ceiling mount bracket. 2-1 Installation and Connection 2-2 Installing the Projector S3 Install the projector so that the beam from the projector is perpendicular to the screen. • Place the projector so that the lens aims at the center of the screen. If the screen is not vertical, the picture on the screen may not appear rectangular. • Do not install the screen in bright surroundings. If the surroundings are too bright, the picture on the screen will be washed out and not display clearly. • When using the projector in bright surroundings, use curtains to block the light. • You can install the projector in the following locations relative to the screen: Front-Floor / Front-Ceiling / Rear-Floor / Rear-Ceiling. To view the installation position settings, see below. To adjust the picture when you install the projector behind the screen Installing behind a semi-transparent screen. When you install the projector behind a semi-transparent screen, you can use the menu to adjust the picture so that it displays correctly, depending on where you've located the projector, rear-floor (or low) or rear-ceiling. 1. For rear-floor, press : Menu > Setup > Install > Rear-Floor 2. For rear-ceiling, press : Menu > Setup > Install > Rear-Ceiling projector in the front of the screen To adjust the picture when you install the I & Installing the projector in front of the screen. When you install the projector in front of a screen, you can use the menu to adjust the picture so that it displays correctly, depending on where you've located the projector, front-floor (or low) or front-ceiling. 1. For front-floor, press : Menu > Setup > Install > Front-Floor 2. For front-ceiling, press : Menu > Setup > Install > Front-Ceiling Installation and Connection 2-2 2-3 Leveling with Adjustable Feet ^ Press the PUSH buttons, as shown, to adjust the legs and level S3 The projector can be adjusted to a height of up to 30 mm (about 12 °) from the reference point. If
Proiettori - SP-M200W (1.27 mb)
Proiettori - SP-M250W (1.27 mb)