valutazioni - 2, GPA: 3.5
(
)
)
|
Foto e specifiche Casio XJ-560 |
Facilità d'uso
• This setting is not possible when the input source is RGB/Component and when there is no input signal. • A different setting can be configured and is stored for each input source. 31 Using the Setup Menu Image Adjustment .. Color Mode This sub-menu lets you select from among five different color settings to optimize projection in accordance with image contents and projection conditions. Input Source Specific Menu Items Input Source Available Items (Parentheses indicate defaults.) RGB (Presentation), Standard, Graphics, Theater, Blackboard Component Presentation, Standard, Graphics, (Theater), Blackboard S-VIDEO VIDEO No Signal None Setting Explanations Presentation: Select this setting for standard presentations in a well-lit area. Standard: Select this setting when you want to highlight the colors during your presentation. Graphics: Select this setting when you want photographs and graphics to appear natural. Theater: Select this setting to bring out the dark portions of your images. Blackboard: Select this setting for easy viewing when projecting onto a blackboard. Setting Storage A different setting is stored for each input source. Image Adjustment .. Color Balance This sub-menu lets you adjust the color balance of the projected image. There are two methods you can use to adjust color balance, selecting a preset color temperature value or adjusting the red, green, or blue components of each color. • Note that you can adjust the color balance either by selecting a color temperature value or by adjusting color components. You cannot do both. • Color balance settings cannot be configured when there is no input signal. • A different setting can be configured and is stored for each input source. 32 Using the Setup Menu Adjusting Color Balance by Selecting a Color Temperature Value You can use the procedure below to adjust color balance. Changing the color temperature of an image alters its whiteness. A lower color temperature makes whites redder, while a higher color temperature makes them bluer. 1. On the “Image Adjustment” main menu, select the “Color Balance” submenu item, and then press the [ENTER] key. • This displays the color balance setting screen. 2. Use the [..] and [..] keys to select “Color Temperature”, and then press the [ENTER] key. • This causes a .. mark to appear at the beginning of the “Color Temperature” line, which indicates that color temperature value selection is enabled. 3. Use the [..] and [..] keys to adjust the color temperature. 4. After the setting is the way you want, press the [MENU] key. Adjusting Color Balance by Adjusting Color Components Instead of specifying a color temperature to adjust color balance, you can also individually adjust the relative intensity of the red, green, and blue components. 1. On the “Image Adjustment” main menu, select the “Color Balance” submenu item, and then press the [ENTER] key. • This displays the color balance setting screen. 2. Use the [..] and [..] keys to select “Color”, and then press the [ENTER] key. • This causes a .. mark to appear at the beginning of the “Color” line, which indicates that color adjustment is enabled. 33 Using the Setup Menu 3. Use the [..] and [..] keys to select the color you want to adjust, and then use the [..] and [..] keys to adjust it. 4. After all the settings are the way you want, press the [MENU] key. Image Adjustment .. Vertical Position This sub-menu lets you adjust the vertical position of the input source image within the projection area. • This setting is not possible when there is no input signal. • “Image Adjustment” main menu item settings are saved for the current signal type only (XGA/60Hz, SXGA/60Hz, etc.), and not for the input signal source. Note, however, that the number of signal type settings that can be saved is limited. Exceeding the limit causes the oldest setting to be deleted automatically. Image Adjustment .. Horizontal Position This sub-menu lets you adjust the horizontal position of the input source image within the projection area. • This setting is not possible when there is no input signal. • See “Image Adjustment .. Vertical Position” for details about how settings are saved. Image Adjustment .. Frequency This sub-menu lets you manually control the frequency of the image. Normally, the projector is able to adjust the frequency automatically. If there are vertical bands in the projected image, however, it means that automatic adjustment is not possible for some reason. When this happens use this setting to adjust the image frequency. • This setting is possible only when RGB is selected as the input source. • Settings are saved for each signal type (XGA/60Hz, SXGA/60Hz, etc.). Note, however, that the number of signal type settings that can be saved is limited. Exceeding the limit causes the oldest setting to be deleted automatically. • If, for some reason, your manual frequency settings cause the image input from the computer to disappear from the projection, you can press the [AUT...
Questo manuale è adatto anche per i modelli :Proiettori - XJ-460 (2.9 mb)