valutazioni - 3, GPA: 4.7 ( )

Produttore : Casio File Size : 5.27 mb File Nome : Lingua di insegnamento:

YC-400/YC-430 Document stage Camera Camera stand USB cable 3 3 With nothing on the document stage, press the [ ] (power) button on the camera stand. • This will turn on the document camera, which will cause its lens to extend. • The Data Projector will recognize the document camera and start up the YC Camera application automatically. When the YC Camera application starts up, the Data Projector will project an image of the document stage along with a dialog box for adjusting the document camera position. • If the document camera is positioned correctly, position adjustment will end automatically and the dialog box will close. At this time the monitor screen (the image being picked up by the document camera) will be projected. • If the document camera is not positioned correctly, a message prompting you to adjust the document camera position will appear. Follow the instructions shown in the message to adjust the document camera position. 48 4 4 Place the document whose image you want to project onto the document camera’s document stage. • Be sure to place the document in the center of the stage, and do not let any part of the document extend off the edges of the stage. • When placing a landscape orientation document onto the document stage, the top of the page should face towards the camera stand. • Initially the monitor image will be projected, and so the image will appear a bit fuzzy. • When the document camera senses that the document on the stage is not being moved, it will record its image and switch from the fuzzy monitor image to a high-resolution image (recorded image) automatically. Rough (Monitor) Image Recorded Image 5 5 Now you can replace the document currently on the stage with another one. • This will switch to the recorded image of the next document automatically. Note Step 5 above is what happens while the Data Projector’s YC Camera application is configured with its initial default settings. The recorded image will not switch automatically if you have changed the “Operation Mode” setting of the YC Camera application to “Manual Capture”. For more information, see “YC Camera Application Setup Menu Contents” on page 57. 49 YC Camera Application Operations This section explains the various types of projection operations you can perform with the YC Camera application and how to configure YC Camera application settings. Important! The procedures in this section assume that you have already connected the Document Camera to the Data Projector as explained under “Connecting the Document Camera to the Data Projector” (page 47), and that the Data Projector’s YC Camera application is running. YC Camera Application Projection Operations The operations in this section are performed using the YC Camera function menu, which appears when you press the [FUNC] key while the YC Camera application is running. Some operations can be performed using the remote controller’s [ ], [..], and [..] keys. To release the document camera shutter manually 1 1 Press the [FUNC] key to display the YC Camera application function menu. • The “Camera Shutter” item should be highlighted by default. 2 2 Press the [ENTER] key to release the document camera shutter. • This will cause the image recorded with the document camera to be projected. Note While a rough monitor image or recorded image is projected, you can release the shutter manually by pressing the [ENTER] key, without pressing the [FUNC] key. 50 To adjust the document camera’s zoom setting 1 1 Press the [FUNC] key to display the YC Camera application function menu. 2 2 Use the [..] key to move the highlighting to “Camera Zoom/Focus” and then press the [ENTER] key. • This causes the YC Camera Zoom/Focus dialog box to appear in the projection area. The “Optical Zoom” item should be highlighted by default. 4 4 3 3 Use the [..] and [..] keys to adjust the document camera’s zoom setting. After the zoom setting is the way you want, press the [ESC] key. • This will close the YC Camera Zoom/Focus dialog box. 2 2 1 1 To adjust document focus manually Press the [FUNC] key to display the YC Camera application function menu. Use the [..] key to move the highlighting to “Camera Zoom/Focus” and then press the [ENTER] key. • This causes the YC Camera Zoom/Focus dialog box to appear in the projection area. 5 5 4 4 3 3 Press the [..] key to move the highlighting to “Focus”. Use the [..] and [..] keys to adjust the document camera’s focus. After the focus is the way you want, press the [ESC] key. • This will close the YC Camera Zoom/Focus dialog box. 51 2 2 1 1 To adjust the camera position Remove all documents and objects from the document stage. Press the [FUNC] key to display the YC Camera application function menu. 3 3 Use the [..] key to move the highlighting to “Adjust Camera Position” and then press the [ENTER] key. • This displays the camera position adjustment dialog box. 4 4 Point the document camera downwards so the lens is pointed towards the document stage. • Aim the camera a...

Scarica la tua

Per scaricare, digitare 2 cifre :