valutazioni - 4, GPA: 4.5 ( )

Produttore : Toshiba File Size : 3.09 mb File Nome : Lingua di insegnamento:

If you are in a hurry, there is no problem with unplugging the power cord in this state. In standby Note • The projector consumes about 6W of power in standby (models equipped with PC card slot consume about 18W). We recommend that you unplug the power cord if you will not be using the projector for an extended period. PRECAUTIONS • Before unplugging the power cord, make sure that the LAMP indicator is off. Unplugging the power cord and cutting off the power while the projector is running or being cooled will shorten the life of the lamp. However, please unplug the power cord if the projector locks up or acts abnormally. • If the power cord was unplugged before cooling was complete, give the lamp sufficient time to cool before plugging it back in. If the lamp overheats it may fail to light, and its lifetime will be shortened. LCD Panels LCD panels wear out. In order to prolong the lifetime of your LCD panel, take the following precautions. • In order to extend the lifetime of the LCD panel, always turn off the power when not in use, and make sure that the lamp is off. Keeping the lamp off is also very effective at saving electricity. • If the air filter becomes dirty and clogged, the projector’s internal temperature will rise, shortening the lifetime of the LCD panel and causing malfunctions. Clean the air filter from time to time p.56 , and replace it periodically. Contact the store where you purchased your projector, or your local Service Station for replacement air filters. 26 Basic Preparations • Place the projector, and correctly connect Remote Control • To operate via the remote control, PJ MODE] p.20 must be selected. Press the PJ MODE button. The button lights up. This light will go out 30 seconds after operations are complete. If [PJ MODE] Lights up necessary, press the button again. INPUT R-CLICK PJ MODE LASER VOL. - VOL. + MENU / ENTER 1 Turn on the power. Turn on the power, following the instructions in “Turning on the power” p.25 . 2 Select language (When using for first time). When the projector is used for the first time after purchase, a message is displayed on the screen, and the language menu appears. The default language is English. (If the screen focus is not on the menu, adjust according to step 6.) q Use the buttons to select the desired English ................ English ............. . language, and press the button. Francais French Deutsch German ............. . A message displays the selected language. ............... . .............. . Italiano Italian Espanol Spanish Portugues Portuguese w Press the button to apply. ......... . .................. . Japanese ....... Chinese (simplified) ....... Chinese (traditional) ................... Korean Notes • After the first time the projector is turned on, the Language menu does not appear upon startup. However, from the Reset menu p.55 select “ Reset all” to display the Language menu the next...

Scarica la tua

Per scaricare, digitare 2 cifre :