valutazioni - 2, GPA: 4
(
)
)
|
Facilità d'uso
(Standard) (Mounted from ceiling) (Rear) (Rear mounted from ceiling) Yes Yes Yes Yes Language Select one of the languages below for the menu and messages [ : Enter setting mode] [ : Selection] [ : Apply] English/Deutsch/Francais/Italiano/Espanol/ ..(...)/.../Svenska. Yes Yes Yes Yes Start-up screen Display start-up screen when power is turned on On Off Yes Yes Yes Yes Notes • None: displays screen without special effects. • Wipe: screen scrolls in from the top or bottom. • Dissolve: adds dissolve effect to screen. • Cover: screen overlaps previous image. Displaying Information (Status display) This displays information about the input signal, battery life time, and so on. “Yes”: displayed, “No”: not displayed Item Description RGB Y/PB/PR Video USB Input Input source name Yes Yes Yes Yes Resolution Resolution (in dots) Yes No No No Video mode Display color method of video signal No Yes Yes No Battery info Display the battery remains Yes Yes Yes Yes Version Firmware version [Note] Yes Yes Yes Yes Notes 1. The mode of supported RGB signals is shown. 2. [Firmware version] shows the version of the projector’s internal control program. This version is referred to for customer service, etc. Operations 39 Lens and main unit cleaning Lens cleaning • Clean the lens with a commercially available blower and/or lens cleaner. • The lens is easily scratched, so do not rub it with hard objects, or strike it. Main unit cleaning • Clean the main unit after unplugging the power cord. • Wipe dirt off the main unit gently with a soft cloth. • Do not wipe the main unit with a damp cloth. Doing so may allow water to get inside, resulting in an electric shock or failure. • Do not use benzene, thinner or similar substances, like as they may deform or discolor the unit, or damage the paint surface. • When using a chemically treated cloth, follow the precautions included with the cloth. 40 Before calling service personnel If you think something is wrong, check the followings before contacting customer service. If This Happens Check No power • Is the power cord or battery pack plugged in? Is it connected to the projector? Power is lost during use • Is the ambient temperature high? • Is the air intake or air exhaust blocked? No picture • Is the projector turned on? • Are the connections set up correctly? • Are all the connected devices functioning properly? No audio • Are the connections set up correctly? • Are all the connected devices functioning properly? Picture not displayed correctly • Is the input signal supported by the projector? , • Is something generating an abnormal video signal, for instance the video tape? Picture blurred Part of picture out of focus • Is the lens dirty? • Is the lens focus adjusted optimally? • Is the projection distance within the projector’s supported range? • Is the projector’s screen placement angle tilted too far? • Are the sharpness or sampling phase adjustments off? Colors too light Bad shading • Are the color, tint, R-level, G-level, or B-level adjustments off? • Is the screen dirty? Remote control doesn’t work • Is the remote control’s battery exhausted? • Is the battery inserted into the remote control correctly? • Is the remote control being used within the effective range? • Are there any obstructions between the remote control and projector? • Are there any fluorescent or other bright lights shining at the projector’s infrared remote sensor? Others 41 Indicators State/ Problems Icon/ Messages Close Messages LED Indicators Temp Batt USB current over Note 1 Press any key USB disk error JPEG error Note 2 Battery low (< 10%) Battery capacity less than 10%! Press any key, or charging starts. F2 Battery exhausted The projector is shutting down F2 Battery error F5 Battery overheats F2 F2 Battery charging Start charging On Battery full Stop charging Off Environment overheat F2 On Fan lock LED overheat On System error F5 F5 Note 1: The USB icon will be shown when selected. F2: Flash 2Hz Note 2: Display in file view mode under thumbnail mode. F5: Flash 5Hz 42 Specifications List of general specifications Item Specification Consumption Power 35W Weight (including the battery) 0.75kg (battery: 0.25kg) External Dimensions (including protruding parts) 140 x 62 x 124 (W x H x D, mm) Cabinet material Mg Alloy Conditions for usage environment Operating temp: 5°C to 35°C; relative humidity: 80% max. Storage temp: -20°C to 60°C; relative humidity: 80% max. Display device 1 chip DMD™ Picture elements True 800 . 600 resolution, 16.7M True colors Lens f=2.6mm (fixed) Light source LED light module (10W) Projection screen size 11-68 inches Projection distance 0.4-2.5m Speaker 0.5W ConnectionterminalCOMPUTER(Y/PB/PR) IN terminal Mini D sub 15 pin Analog RGB / Y/PB/PR (dual use) VIDEO terminal VIDEO: RCA Pin Jack AUDIO 3.5mm stereo mini-jack Notes • This model complies with the above specifications. • Designs and specifications are subject to change without notice. • This model may not be compatible with features and...
Questo manuale è adatto anche per i modelli :Proiettori - TDP-FF1AU (3.34 mb)