valutazioni - 2, GPA: 4.5
(
)
)
|
Facilità d'uso
Viewing the manual Run the CD-ROM and double-click on Start.pdf. Acrobat® Reader® launches, and the menu screen of the Owner’s manual appears. Click on your language. The Owner’s Manual cover and list of bookmarks appear. Click on a bookmark title to view that section of the manual. Click on p. to view a reference page with related information. See the Help menu for more information about Acrobat® Reader®. 16 Names of each part on the main unit (2) (4) (3) (1) (6) (7) (5) (12) (13) (14) (15) (10) (9) (5) (8) (11) Back Front Name : Function (1) Lens : Projects expanded image. (2) Infrared remote sensor : Senses commands from the remote control.p.20 (3) Foot adjuster release button : Press to set up or stow the foot adjuster. p.27 (4) Air exhaust : Expels air that has grown hot inside the projector. (5) Air intake : Draws in air from outside the projector for internal cool down. (6) Control panel : Operates the projector. p.17 (7) Zooming ring : Adjusts screen size. p.27 (8) Speaker : Outputs audio sound. (9) AC IN socket : Connect the supplied power cord here. (10) Rear panel : Connects external devices. p.19 (11) Antitheft lock slot : Attach a safety cable or any other antitheft device. (12) Tilt adjuster : Adjusts the projector’s horizontal tilt. p.27 (13) Lamp cover : Remove to replace lamp. p.37 (14) Foot adjuster : Adjusts the vertical projection angle. p.27 (15) Focusing ring : Adjusts screen focus. p.27 Names of each part on the control panel (3) (1) (2) (1) (8) (9) (5) (6) (4) (7) Name : Main Function Control panel (1) VOL +/- button : Adjusts the volume. (2) ENTER button : Accepts the selected mode. (3) KEYSTONE +/- button : Adjusts keystone distortion. p.28 (4) Selection buttons : Menu selections and adjustments. p.31 (5) INPUT button : Selects input source. p.26 (6) ON/STANDBY button/ : Turns the power on/off (standby). p.24 indicator : Displays power on/off mode. p.24 (7) MENU button : Displays menus. p.31 (8) TEMP indicator : Lights when internal temperature is too high. p.40 (9) LAMP indicator : Displays lamp mode. p.40 Names of each part on the remote control Remote control transmitter (5) (6) (3) (7) (4) (2) (1) (1) (3) (10) (9) (11) (9) (8) Name : Main Function (1) VOL +/- button : Adjusts the volume. (2) ENTER button : Accepts the selected mode. (3) KEYSTONE +/- button : Adjusts keystone distortion. p.28 (4) Selection buttons : Menu selections and adjustments. p.31 (5) INPUT button : Selects input source. p.26 (6) ON/STANDBY button : Turns the power on/off (standby). p.24 (7) MENU button : Displays menus. p.31 (8) FREEZE button : Pauses image. p.29 (9) RESIZE buttons : Enlarges images. p.30 (10) Auto-Set button : Performs auto-adjustment of input signals from computer. p.28 (11) MUTE button : Cuts off the picture and sound temporarily. p.29 Parts on the rear panel (7) (1) (5) (2) (3) (4) (6) (8) (9) Name : Main Function (1) COMPUTER IN terminal : Input analog RGB signal from a computer or other source, or a component video signal (Y/PB/PR) from video equipment. (2) S-VIDEO terminal : Input S video signals from video equipment. (3) VIDEO terminal : Input video signals from video equipment. (4) AUDIO IN terminal : Input audio signals. (5) AUDIO OUT terminal : Outputs audio signals. (6) MONITOR terminal : Connect to a computer display, etc. (7) CONTROL terminal : When operating the projector via a computer, connect this to the controlling computer’s RS-232C port. p.45 (8) AC IN socket : Connect the supplied power cord here. (9) Antitheft lock slot : Attach a safety cable or any other antitheft device. Preparing and using the remote control ¦ Loading a coin cell battery into the remote control j Remove the battery holder. Hold down the side release firmly and pull out the battery holder. k Load a coin cell battery (CR2025). Be sure to align the plus and minus ends of the battery properly. 3VOLTSCR2025 l Replace the battery holder back into the remote control. M3VOLTSCR2025 Notes • When you use for the first time after purchase, a plastic sheet is provided between the battery and its contact. Be sure to remove by pulling it off. • When operating the remote control from behind the projector, the signal beam is reflected on the projecting surface and may travel a shorter distance to reach the projector depending on the shape and material of the projecting surface. ¦ Operating the remote control Point toward the projector’s infrared remote sensor, and press a button on the remote control. • Operating the projector from the front Approx. 7mApprox.15 Coin cell battery • Before using the battery, be sure to observe the Safety Precautions described in previous pages. • Remove the battery from remote control when not using for extended periods. • If the remote control stops working, or if its range decreases, replace the battery with a new one. • Keep the battery away from the reach of children. Battery is choking hazard and can be very dangerous if swallowed. If the battery is swallowed, seek medical a...
Questo manuale è adatto anche per i modelli :Proiettori - TDP-SP1U (2.72 mb)