valutazioni - 0, GPA: 0
(
)
)
|
Facilità d'uso
Check to see if nothing is blocking the ventilation holes. Both LAMP/COVER and TEMP/FAN indicators light up. The electrical system has failed. Consult with qualified Sony personnel. Warning messages Use the list below to check the meaning of the messages displayed on the screen. Message Meaning Remedy High temp.! Lamp off in 1 min. Internal temperature is too high. Turn off the power. Check to see if something is blocking the ventilation holes. Frequency is out of range! This input signal cannot be projected as the frequency is out of the acceptable range of the projector. Input a signal that is within the frequency range. The resolution setting of the output signal of the computer is too high. Set the setting of output to XGA (see page 15 (GB)). Please check INPUT-A setting. You have input an RGB signal from the computer when INPUT-A in the SET SETTING menu is set to COMPONENT or VIDEO GBR. Set INPUT-A correctly (see page 27 (GB)). Please replace the LAMP. It is time to replace the lamp. Replace the lamp. Caution messages Use the list below to check the meaning of the messages displayed on the screen. Message Meaning Remedy NO INPUT No input signal Check connections (see pages 15 (GB) to 18 (GB)). Not applicable! You have pressed the wrong key. Press the appropriate key. SPEAKER OFF SPEAKER in the SET SETTING menu has been set to OFF. Set SPEAKER to ON if necessary (see page 27 (GB)). 35 (GB) Specifications Specifications Optical characteristics Projection system 3 LCD panels, 1 lens, projection system LCD panel 0.9-inch TFT LCD panel with micro-lens array, 2,359,296 pixels (786,432 pixels . 3) Lens 1.3 times zoom lens (manual) f 33.6 to 42 mm/F 1.7 to 2.1 Lamp 200 W UHP Projection picture size Range: 40 to 300 inches (diagonal measure) Light output ANSI lumen1) 2000 lm Throwing distance 40-inch: 1458 to 1764 mm (57 1/2 to 69 3/8 inches) 60-inch: 2217 to 2675 mm (87 1/2 to 105 1/4 inches) 80-inch: 2977 to 3586 mm (117 3/8 to 141 3/8 inches) 100-inch: 3736 to 4497 mm (147 3/8 to 177 1/4 inches) 120-inch: 4495 to 5408 mm (177 1/4 to 213 1/8 inches) 150-inch: 5635 to 6774 mm (221 3/4 to 266 5/8 inches) 180-inch: 6774 to 8141 mm (266 5/8 to 320 5/8 inches) 200-inch: 7533 to 9052 mm (296 1/2 to 356 3/8 inches) 250-inch: 9432 to 11329 mm (371 3/8 to 446 1/8 inches) 300-inch: 11330 to 13607 mm (446 1/8 to 536 inches) Electrical characteristics Color system NTSC3.58/PAL/SECAM/NTSC4.43/ PAL-M/PAL-N system, switched automatically/manually Resolution 750 horizontal TV lines (Video input) 1024 . 768 dots (RGB input) Acceptable range for computer signals fH: 19 to 92 kHz fV: 48 to 92 Hz (Input resolution signal: SXGA 1280 . 1024 fV: 85 Hz, maximum) Acceptable settings for video signals 15kHz RGB/ component 50/60 Hz, Composite video, Y/C video Speaker Stereo speakers system, 28 mm (1 1/8 inches) diameter, max. 2 W . 2 Input/Output VIDEO IN S VIDEO: Y/C mini DIN 4-pin type (female) Y (luminance): 1 Vp-p ±2 dB sync negative (75 ohms terminated) C (chrominance): burst 0.286 Vp-p ±2 dB (NTSC) (75 ohms terminated), burst 0.3 Vp-p ±2 dB (PAL) (75 ohms terminated) VIDEO: phono type Composite video: 1 Vp-p ±2 dB sync negative (75 ohms terminated) AUDIO: Stereo minijack 500 mVrms, impedance more than 47 kilohms INPUT A INPUT A: HD D-sub 15-pin (female) Analog RGB/component: R/R-Y: 0.7 Vp-p ±2 dB (75 ohms terminated) G: 0.7 Vp-p ±2 dB (75 ohms terminated) G with sync/Y: 1 Vp-p ±2 dB sync negative (75 ohms terminated) B/B-Y: 0.7 Vp-p ±2 dB (75 ohms terminated) ......................................................................................................................................................................................................... 1) ANSI lumen is a measuring method of American National Standards Institute IT7.228. 36 (GB) Specifications SYNC/HD: Composite sync input: 1-5 Vp-p high impedance, positive/negative Horizontal sync input: 1-5 Vp-p high impedance, positive/ negative VD: Vertical sync input: 1-5 Vp-p high impedance, positive/ negative AUDIO: Stereo minijack 500 mVrms, impedance more than 47 kilohms INPUT B INPUT B: HD D-sub 15-pin (female) Analog RGB: R: 0.7 Vp-p ±2 dB (75 ohms terminated) G: 0.7 Vp-p ±2 dB (75 ohms terminated) G with sync: 1 Vp-p ±2 dB sync negative (75 ohms terminated) B: 0.7 Vp-p ±2 dB (75 ohms terminated) SYNC/HD: Composite sync input: 1-5 Vp-p high impedance, positive/negative Horizontal sync input: 1-5 Vp-p high impedance, positive/negative VD: Vertical sync input: 1-5 Vp-p high impedance, positive/negative AUDIO: Stereo minijack 500 mVrms, impedance more than 47 kilohms OUTPUT MONITOR: HD D-sub 15-pin (female) Analog RGB/Component: R/R-Y, G/Y, B/B-Y: Gain Unity, 75 ohms SYNC/HD, VD: 4 Vp-p (open), 1 Vp-p (75 ohms) AUDIO (variable out): Stereo minijack, max. 1 Vrms, When an output signal is 500 mVrms, impedance less than 5 kilohms REMOTE RS-232C: D-sub 9-pin (female) Safety regulations UL1950 cUL (CSA No. 950) FCC Class A IC Class A NEMKO (EN60950) CE (LVD, EMC) C-Tick Ge...