valutazioni - 0, GPA: 0
(
)
)
|
Facilità d'uso
Notes • Connect all the connecting cables to the INPUT A connector when you input a signal from the INPUT A connector. Connect all the cables to the INPUT B connector when you input a signal from the INPUT B connector as well. • Supplied mouse cables may not work properly according to your computer. When connecting with an IBM PC/AT compatible computer Setting up and projecting RS-232C IN PLUG IN POWER OUTPUT INPUT A INPUT B VIDEO INCONTROL SREMOTE DIGITAL RGB USB R/R-Y/PR B/B-Y/PB SYNC/HD VD G/Y MOUSEAUDIORGB MOUSEAUDIOAUDIO RGBMONITOR S VIDEO VIDEO AUDIO L R (MONO) DIGITAL RGB RGB 5BNC DIGITAL RGB RGB 5BNC Right side to serial port or to mouse port Monitor SIC-S21 (for serial)/S22 (for PS/2) Mouse cable (supplied) to monitor out Stereo audio connecting cable (not supplied) to audio out HD D-sub 15-pin cable (supplied) Computer Monitor cable SMF-410 (not supplied) Speaker Note Set the DIGITAL RGB/5BNC/RGB switch to RGB (right) when you connect the computer to the INPUT A connector. to INPUT A or INPUT B ......................................................................................................................................................................................................... 1) IBM and PC/AT are a trademark and a registered trademark of International Business Machines Corporation, U.S.A. 15 (GB) Connecting When connecting with a Macintosh Using the DIGITAL RGB (TMDS) computer connector Connect the computer to the DIGITAL RGB (TMDS) connector on the connector panel. Right side SIC-S20 Mouse cable (not supplied) to mouse port to audio out to monitor out Signal adapter (not supplied) RS-232C IN PLUG IN POWER OUTPUT INPUT A INPUT B VIDEO INCONTROL SREMOTE DIGITAL RGB USB R/R-Y/PR B/B-Y/PB SYNC/HD VDG/Y MOUSEAUDIORGB MOUSEAUDIOAUDIO RGBMONITOR S VIDEO VIDEO AUDIO L R (MONO) DIGITAL RGB RGB 5BNC DIGITAL RGB RGB 5BNC Stereo audio connecting cable (not supplied) Computer Monitor Monitor cable SMF-410 (not supplied) HD D-sub 15-pin cable (supplied) Speaker Notes • Set the DIGITAL RGB/5BNC/RGB switch to RGB (right) when you connect the computer to the INPUT A connector. • When you connect with a Macintosh computer, you need the optional signal adapter. to INPUT A or INPUT B Right side Notes • Use the proper mouse cable for your computer. • You can use a USB mouse. For details, see “Using USB equipment (e.g., USB mouse)”. • Set the DIGITAL RGB/5BNC/RGB switch to DIGITAL RGB (left). • To connect digital RGB equipment, use the digital signal cable (SMF-D102 or SMF-D110) (not supplied). Do not use other cables — noise may appear on the image. Mouse cable Stereo audio connecting cable (not supplied) Digital signal cable SMF-D102 (not supplied) or SMF-D110 (not supplied) RS-232C IN PLUG IN POWER OUTPUT INPUT A INPUT B VIDEO INCONTROL SREMOTE DIGITAL RGB USB R/R-Y/PR B/B-Y/PB SYNC/HD VDG/Y MOUSEAUDIORGB MOUSEAUDIOAUDIO RGBMONITOR S VIDEO VIDEO AUDIO L R (MONO) DIGITAL RGB RGB 5BNC DIGITAL RGB RGB 5BNC to mouse port to digital RGB out to audio out Computer Computer Remote cable to RS-232C port Note If you use the DIGITAL RGB (TMDS) connector, the MONITOR connector will not output image signals. 16 (GB) Using USB equipment (e.g., USB mouse) Connect the USB equipment to the USB connector on the connector panel. You can connect your computer to the projector via the RGB connector, 5BNC connector or DIGITAL RGB connector. (The example below uses the RGB connector.) Note Set the DIGITAL RGB/5BNC/RGB switch to the suitable position depending on the connection. RS-232C IN PLUG IN POWER OUTPUT INPUT A INPUT B VIDEO INCONTROL SREMOTE DIGITAL RGB USB R/R-Y/PR B/B-Y/PB SYNC/HD VDG/Y MOUSEAUDIORGB MOUSEAUDIOAUDIO RGBMONITOR S VIDEO VIDEO AUDIO L R (MONO) DIGITAL RGB RGB 5BNC DIGITAL RGB RGB 5BNCRight side HD D-sub 15-pin cable (supplied) Stereo audio connecting cable (not supplied) to monitor out to USB port to audio out Other USB equipment USB cable A type-B type (supplied) Computer On the USB function When connecting the projector to a computer by using the USB cable for the first time, the computer recognizes the following devices automatically. 1 USB hub (general use) 2 USB human interface device (wireless mouse function) 3 USB human interface device (projector control function) The computer also recognizes the device connected to the downstream connector on the projector. Recommended operating environment When you use the USB function, connect your computer as illustrated above. This application software and the USB function can be used on a computer loaded with Windows 98, Windows 98 SE or Windows 2000 preinstall models. Connecting Notes • As the projector recognizes the USB mouse when the computer is connected to the USB connector, do not connect anything to the MOUSE connector. • Your computer may not start correctly when connected to the projector via the USB cable. In this case, disconnect the USB cable, restart the computer, then connect the computer to the projector using the USB cable. • This pro...
Questo manuale è adatto anche per i modelli :Proiettori - VPL-PX31 (1.91 mb)