valutazioni - 2, GPA: 4.5
(
)
)
|
Facilità d'uso
6 Troubleshooting ........................................................................ 7 Packing List and Accessories .................................................... 8 Service and Support .................................................................. 8 System Diagram: 1. Camera head 6. Lighting arm 2. Remotes Sensor 7. Power switch 3. Upper mechanical arm 8. Base light 4. Main mechanical arm 9. Control panel 5. Side lamp 10. Base unit Rear Panel Connections Video, Audio: Video & Audio Input Video, Audio: Composite Video & Audio Output S-VIDEO: S-video Output MIC: Microphone Input VGA OUT1;VGA OUT2:VGA Output VGA IN1; VGA IN2: VGA Input PC IN: PC stereo audio input USB: PC connector DC12V: power adapter connector Front Control Panel: 1) POWER: Press the Power button for 3 seconds to turn the camera on or off. 2) VGA: Switch between VGA output 1 & VGA output 2 3) RED+, RED-: Image chroma control (red). 4) BLUE+, BLUE-: Image chroma control (blue). 5) BRT+, BRT-: Image brightness control. 6) MIRROR: Toggle mirror image of camera output (Left to right) 7) LIGHT: Lamp control – Toggles between base lamp, arm lamps, all lamps and off. P/N: Switch the image mode between positive and negative. 8) AWB: Perform white balance automatically. 9) T/I: Switch the image between text mode and dynamic mode. Text mode gives sharper and better-colored images when showing printed material. 10) FREEZE: Freeze frame the image 11) BROWSE: Enable the function of side-by-side images comparison on same screen. 12) PLAYBACK: Playback saved pictures 13) FOCUS: Automatically focus the image 14) ZOOM UP, ZOOM DOWN: Zoom the image in and out SPECIFICATIONS: Power supply 12V DC power adapter Maximum power consumption 20 W Operatingcondition Temperature 0 — 45. Humidity 5% - 75% Non-condensing Dimentions(packing case) 425mm*477mm*170mm (W Weight 6.0 kg Light source LED Compliance ROHS,CE,CCC,ISO9001 Inputs Audio 1 x,<2.0 Vp -- p Video 1 x,<1.0 Vp -- p/75. Signal system NTSC VGA(PC) 2x Outputs Audio 1 x,<2 Vp -- p Video 1 x,<1.0Vp -- p/75. Signal system NTSC USB connector 1x S-Video 1X VGA(PC) 2X Camera Video output RGBHV Sensor CCD image sensor Total pixels 850,000 Focus Auto/manual Zoom > 96X Scan frequency 48 KHz(horizontal),60 Hz Images side-by-side Manual Brightness adjustment Manual Text/Image mode switch Manual Initial Setup: 1. Unpack system and put aside all packing materials. Unfold the lighting arms until reach the end position. 2. Raise the main camera arm until it locks in place, then rotate the upper camera arm. 3. Rotate the camera head until the lens face the center of the base unit. 4. Connect RGB interface: use the provided RGB cable, connect the output of the visual presenter with the RGB input the display (monitor, television or projector). 5. Connect the composite-in interface: use the provided RCA pin cable. Plug the power cord into the power cord receptacle of the visual presenter and the AC outlet. Operating Instructions 1. General: 1). Turn on...
Questo manuale è adatto anche per i modelli :Proiettori - VP-30 (333.91 kb)
Proiettori - VP-30 (333.91 kb)
Proiettori - VP-30 (333.91 kb)
Proiettori - VP-30 (333.91 kb)