valutazioni - 2, GPA: 4
(
)
)
|
Facilità d'uso
. • Confirm your selection of items. 12 PAGE No function. 13 RGB Press "RGB" for true-color optimization. 14 BRIGHTNESS Press "BRIGHTNESS" to adjust the brightness of the image. 15 CONTRAST Use the "CONTRAST" option to control the difference between the lightest and darkest parts of the picture. English 6 English 16 COLOR Press "COLOR" to adjust the color temperature of image. 17 VGA Press "VGA" to change source to the VGA connector. This connector supports analog RGB, YPbPr (480p/576p/720p/ 1080i), YCbCr (480i/576i) and RGBsync. 18 COMPONENT Press "COMPONENT" to change source to Component video. This connection supports YPbPr (480p/576p/720p/1080p) and YCbCr (480i/576i/1080i). 19 S-VIDEO To change source to S-Video. 20 VIDEO To change source to COMPOSITE VIDEO. 21 DVI No function. 22 HDMI™ To change source to HDMI™. 23 MUTE To turn on/off the volume. 24 WIRELESS No function. 25 KeyPad 0~9 Press "0~9" to input a password in the "Security settings". 26 Four directional select keys Use up, down, left, right buttons to select items or make adjustments to your selection. # Icon Function Description Note: When PIP function is activated, zoom and keystone function is unavailable. 7 English Getting Started Connecting the Projector Note: To ensure the projector works well with your computer, please make sure the timing of the display mode is compatible with the projector. # Description # Description 1 Power cord 6 RS232 cable 2 USB cable 7 3 RCA component cable 3 VGA cable 8 S-Video cable 4 HDMI cable 9 Composite video cable 5 Audio cable jack/jack 10 Audio cable Jack/RCA Y Y D-Sub D-Sub R B G R B G R W RS232 USB USB HDMI HDMI 4 VGA 1 3 9 8 5 10 6 2 7 DVD player DVD player, Set-top Box, HDTV receiver Video Output S-Video Output 8 English Turning the Projector On/Off Turning on the Projector 1 Remove the lens cap.(Illustration #1) 2 Ensure that the power cord and signal cable are securely connected. The Power indicator LED will flash red. 3 Turn on the projector by pressing "Power" button on the control panel, and the Power indicator LED will turn blue.(Illustration #2) 4 Turn on your source (computer, notebook, video player ,etc.). The projector will detect your source automatically. • If the screen displays "Lock" and "Source" icons, it means the projector is locked onto a specific source type and there is no such type of input signal detected. • If the screen displays "No Signal", please make sure the signal cables are securely connected. • If you connect to multiple sources at the same time, use the "Source" button on either control panel or the remote control or direct source key on the remote control to switch between inputs. POWER ASPECT RATIO FREEZE HIDE RESYNC SOURCE 1 2 Power button Lens cap 9 Turning the projector off 1 To turn the projector off, press the power button. This message appears: "Please press the power button again to complete the shutdown process." Press the power button again. 2 The LED power indicator will turn RED and blink rapidly after the projector is turned off, and the fan(s) will continue to operate for about 2 minutes to ensure that the system cools properly. 3 As long as the power cord remains plugged in, you can press the power button to turn the projector immediately back on anytime during the 2minute shutdown process. 4 Once the system has finished cooling, the LED power indicator will stop blinking and turn solid red to indicate standby mode. 5 It is now safe to unplug the power cord. Warning indicators: • "Projector Overheated. Lamp will automatically turn off soon." This onscreen message indicates that the projector has overheated. The lamp with automatically turn off, the projector will automatically shut down, and the LED temp indicator will turn solid red. Contact your local dealer or service center. • "Fan failed. Lamp will automatically turn off soon." This onscreen message indicates that the fan has failed. The lamp will automatically turn off, the projector will automatically shut down, and the LED temp indicator will blink. Contact your local dealer or service center. Note: Whenever the projector automatically shuts down and the LED lamp indicator turns solid red, contact your local reseller or service center. English English 10 Adjusting the Projected Image Adjusting the Height of Projected Image The projector is equipped with elevator feet for adjusting the height of image. To raise the image: 1 Press the elevator foot release. (Illustration #1) 2 Raise the image to the desired height angle (Illustration #2), then release the button to lock the elevator foot into position. 3 Use Tilt adjusting wheel (Illustration #3) to fine-tune the display angle. To lower the image: 1 Press the elevator foot release. (Illustration #1) 2 Lower the image to the desired height angle (Illustration #2) , then release the button to lock the elevator foot into position. 3 Use Tilt adjusting wheel (Illustration #3) to fine-tune the display angle. 1 23 3 Elevator foot release button Tilt ...
Questo manuale è adatto anche per i modelli :Proiettori - H7530 Series (2.74 mb)