AttachedUSBdevices In the drop-down list, select the preferred USB device to use for audio input. Audio Output The options in this section let you specify the preferred device to use for audio output (playback). TER1206003 Issue 6 PCoIP® Zero Client and Host Administrator Guide Parameter Description Audio Device Type Select the type of audio output device: • Analog: The analog output device plugged into the analog input jack on the zero client will be used for audio playback. • USB: The USB output device attached to the zero client will be used for audio playback. If more than one is attached, the Audio Output options below let you specify the preferred one to use. Preferred USB This field is automatically populated with the USB device's vendor ID (VID) Device Vendor ID after you select the preferred audio output device in the Attached USB devices drop-down list and apply your changes. You can also manually enter the VID of the preferred attached USB device. Note: This option does not apply to analog audio devices. Preferred USB This field is automatically populated with the USB device's product ID (PID) Device Product ID after you select the preferred audio output device in the Attached USB devices drop-down list and apply your changes. You can also manually enter the PID of the preferred attached USB device. Note: This option does not apply to analog audio devices. Attached USB In the drop-down list, select the preferred USB device to use for audio devices output. 7.16.4 AWI Tera1 Host: Audio The Audio page lets you configure audio options for the device. You can access this page from the Configuration > Audio menu. Note: After configuring the desired options, click Apply and then Continue to have your changes take effect. TER1206003 Issue 6 PCoIP® Zero Client and Host Administrator Guide Figure 4-75: AWI Tera1 Host Audio Page Table 4-71: AWI Tera1 Host Audio Page Parameters EnableMicrosoft® WindowsVista®/ Windows®764- bitModeParameter Description Enable HD Audio When enabled, configures audio support on the device. Note: This property must be enabled on both the host and the client. When disabled, the audio hardware is not available for the host operating system to enumerate. Enable this option for Windows Vista 64-bit and Windows 7 64-bit version operation systems. Warning: Do NOT use this mode with Windows XP 64-or 32-bit operating systems. You do not have to enable the 64-bit mode for Linux 64-bit operating systems. Linux kernels should be compiled with the latest PCoIP audio CODEC support. Enable Audio Line Determines the input mode the audio system advertises to the host In operating system. When enabled, the line-in connector found on the client is used as a standard line-in input. When disabled, the line-in connector found on the client is used as a microphone input. Note: Follow the onscreen instructions if you have Windows Vista or Windows 7 installed on the device. 7.16.5 AWI Te...

Questo manuale è adatto anche per i modelli :
Software - TERA2220 Host Card (4.48 mb)
Software - TERA2321 Zero Client (4.48 mb)
Software - TERA2240 Host Card (4.48 mb)