valutazioni - 2, GPA: 3
(
)
)
|
Facilità d'uso
WALL MOUNTING ON A TELEPHONE WALL PLATE • The telephone can be mounted on a wall phone plate. (Fig .1) • When the telephone is mounted on the wall, the reversible handset holder must be adjusted so it will hold the handset. • Attach the wall mount bracket into bottom of the phone. (Fig .2) • Using the short line cord supplied plug one end into the Tel Line jack on the back of the phone. • Plug the other end of the cord into the wall jack. • place the phone, over the wall plate making sure both posts fit into slots on the back of the phone. Then push down to lock the phone into place on the wall plate. AC ADAPTOR FOR DC JACK SPECIFICATION:OUTPUT-DC 9V 100MA POLARITY OF PLUG + – + Fig.1 Fig.2 SETTING UP You must finish the pre-setting before using the unit. Install 3pcs AA batteries (Not Included) or DC adapter (Not Included), then press and hold [UP] and [DOWN] button for six seconds until the LCD display Adjust Contrast to enter the setting manual including LCD Contrast Adjustment, Language Selectable, Area Code Setting and Time/Date Setting: A. LCD Contrast Adjustment -When Adjust Contrast display on LCD, use [s] and [t] to select the contrast level. There are totally six levels to select. -Press [DEL] to confirm B. Language Selectable -After LCD contrast adjustment, the LCD will display ENG, ESP, FRA (ENG=English, ESP=Spanish, FRA=French), use [s] and [t] to select the desire language mode. -Press [DEL] to confirm C. Area Code Setting -After language setting, the LCD will display ENTER AREA CODE, use [s] and [t] to set the first digit of area code. -Press [DEL] to confirm -Use the same method to set the rest of digits. D. Time/Date Setting -After area code setting, the LCD will display ENTER TIME DATE, use [s] and [t] to set time. -Press [DEL] to confirm -Use the same method to set Date Note: If you want to reset the Press and hold [s] and [t] and [DEL] for six seconds at the same time, all of the present setting will be cleaned. DESCRIPTION OF DISPLAYING A. 3 line LCD displaying, upper line displays the basic information, middle line displays the number of in-coming call and bottom line displays the name of caller • "NEW" appears when there are new incoming calls • "CALL #" means the total amount of incoming calls • "RPT#" means the total amount of repeated incoming calls • "XX:XX AM/PM XX/XX" means Hour:Minute Morning/Afternoon Month/Day respectively • "MGS" means Message B. If a number was received more than once, the LCD will only display the time and date of the last call when review the incoming calls. C. If the time and date of incoming call is different from the Telephone Company, the telephone will adjust the time and date automatically according to Telecom Provider when receiving calls. D. If there is no operation or no incoming calls more than 30 seconds, LCD only displays time and date, total amount of received calls and amount of new incoming calls E. Ringer LED will light when there is a new call coming in until any functional keys be pressed. F. This telephone can store up to 99 incoming calls. If there is a new call after the 99th call, the oldest one will be erased automatically and the new call will be stored. CALLER ID STATUS INDICATIONS 'UNAVAILABLE' The call is made through a telephone company which does not offer Caller ID service. 'PRIVATE' The call was blocked. For privacy reason, many states allow callers the option to prevent his or her telephone data from being displayed on the other part's Caller ID display. If you receive a call which was blocked in this way, "PRIVATE" will be shown on the display. 'LINE ERROR' An error data was received. When ERROR is shown on the display, the telephone number may include some error digits. OPERATION INSTRUCTION Viewing the caller ID list This unit can store up to 99 calls received Press [s] and [t], the display shows the previous (older) data of call. When the oldest data is viewed. "END OF RCV" will appear on the display. If the received number contains your own area code, the area code will not appear on the screen. Erasing data from the caller ID list This unit maintains the data of last 99 calls in memory. If there is a new call after those 99 calls, the oldest data will be automatically erased and the new call will be stored. To erase one stored number at a time 1. Press [s] and [t] button to select the data 2. Press [DEL] twice continuously and the displayed data will be erased. If you press [DEL] for more than 6 seconds, the entire list will be deleted. Calling back a number from the caller ID list -Press [s] and [t] to select the wanted number -Pick up the handset, press [DIAL] twice to dial the displayed number out -Or press [DIAL] key once, then press [DEL] key once and press [DIAL] key once again, the displayed number with adding '1' as first digit will be dialed out automatically (add "1" before dialed number) Tone/Pulse Selector Select the type of dialing that you desire or that your telephone system requires. TONE.... The unit ...