valutazioni - 3, GPA: 3.3
(
)
)
|
Facilità d'uso
Monitor All stations set to Radio/INT on the Master Station can continually hear the sound and activity from a station set to Monitor. Monitor Override From the Master Station, you can temporarily override the Monitor so you can communicate with stations set to Monitor. When Monitor Override is off, stations set to Monitor cannot hear any intercom communication or the door chime. When Monitor Override is on, stations set to Monitor can hear only incoming talk from other remote stations. To turn Monitor Override on and off: To change the setting, simultaneously press and release AUTO and POWER. The display shows either ON (Monitor Override - on) or OFF (Monitor Override - off). Note: Exit the monitor override setting by pressing AUTO and POWER or waiting for the display to show the clock time again. Privacy When the PRIVACY button is activated at a station, the station cannot be listened to or monitored. • The room can still communicate using the Talk feature. • The room still receives music. • The room will still hear the door chime. Security/Home Automation (Optional) This optional function can control another system that is properly connected to the NM200. For example: it may control a door release mechanism, turn on the lights, set off an alarm, etc. This function is available from the Master Station and all Remote Stations (NRS200). It is not available from an Outdoor Remote Station. To initiate this feature from a remote station: 1. Simultaneously press VOLUME UP and VOLUME DOWN and hold for at least 4 seconds. After 4 seconds, this feature is active for as long as the buttons are pressed. 2. Release the buttons to deactivate the feature. Master Station Operation Radio Operation 1. Press POWER to turn on music. 2. Select either FM or AM as the music source. See Master Station Settings/Music Settings/Music Source for instructions. 3. Use TUNE UP or TUNE DOWN to select a station, or press PRESET to select a preset station. Indoor/Outdoor Remote Station Operation Remote Station Functions • Door Talk/Listen Press TALK and LISTEN simultaneously to talk to the Door Stations. Release both buttons to listen. • Listen Listen to all stations set to Intercom or Radio/INT unless they have the PRIVACY button activated. • Talk Talk to all remote stations set to Intercom or Radio/INT. • Privacy Press in PRIVACY button to disable Listen and Monitor functions. • Speaker Volume Use Speaker Volume knob to adjust the remote speaker volume. • Music Volume Turn Music Source On and Off You can turn the Music Source on and off from any Remote Station. To turn the Music Source on, press and hold the MUSIC VOLUME UP button. To turn the Music Source off, press and hold the MUSIC VOLUME DOWN button until the volume level goes to zero. Adjust System Music Volume Adjust the system music volume from any Remote Station by pressing VOLUME UP or VOLUME DOWN. • Select Music Source The system music source can be selected from any Remote Station. The music sources that are available vary depending on the Scan setting on the Master Station (See Master Station Settings/Music Settings/Scan Mode for details). Note: You cannot select specific tracks on the CD from a Remote Station. To scan for a music source: Simultaneously press and release VOLUME UP and VOLUME DOWN to switch music sources. Note: If you press and hold these buttons for 4 seconds or more, you initiate the Security/Home Automation function (See Intercom Operation/Security/Home Automation for details). This function is not available on the Outdoor Remote Station. Door Station Functions When the button on the Door Station is pressed, the chime is heard on all stations set to Intercom or Radio/INT, even if the PRIVACY button is activated. • All system audio (music and intercom) is muted when the chime rings. • If the Door Station is engaged in a talk or listen session, the chime is not heard. CD Player Operation (Optional) 1. Load up to 6 CDs in the CD changer. 2. Press POWER to turn on music. 3. Select CD as the music source. See Master Station Settings/ Music Settings/Music Source for instructions. When CD is selected as the music source, the display shows the following information: • Which CD is playing, indicated by a circle around the CD number. • The track that is playing, indicated by the number on the display. Note: The display will initially show six CD positions. If the CD player reaches a CD position and does not find a CD loaded at that position, that position number disappears from the display. CD Functions • Select Mode Available modes: - Normal: Play CDs and tracks sequentially - Repeat Song: Repeat current track - Repeat Disc: Repeat current disc from beginning - Random Disc: Randomly play tracks on current disc - Random All: Randomly play tracks from all CDs Press and hold MODE button to display total length of time and total number of tracks on current CD. • Next Disc Play the next disc. Press and hold to display elapsed time of current track. Disabled in Random ...
Questo manuale è adatto anche per i modelli :Telefoni con filo - nc300 (486.89 kb)