|
Facilità d'uso
IP&MAC Addresses 2. LAN Port 3. PC Port 4. Firmware Info Select Done 41-001160-03, Rev 00, Releaes 2.4 IP Phone Administrator Guide Administrator Level Options • IP&MAC Addresses Displays the IP address and MAC address of the phone. • LAN Port Displays the Link State, Negotiation Method, Speed, and Duplex Method that the phone uses on its LAN port. • PC Port Displays the Link State, Negotiation Method, Speed, and Duplex Method that the phone uses on its PC Port. • Firmware Info Displays information about the firmware that is currently installed on the IP phone. Phone Status via Aastra Web UI The first screen that displays after logging into the Aastra Web UI for a phone is the Network Status screen. This screen also displays when selecting Status->System Information. The information on this screen is available to the user and the administrator as read-only. 41-001160-03, Rev 00, Releaes 2.4 Administrator Options Administrator Level Options The following is a description of the information on the Network Status screen: • Network Attributes Displays the network status of the Ethernet ports at the back of the phone. You can also view the phone’s IP and MAC addresses. Information in this field includes Link State, Negotiation, Speed, and Duplex for Port 0 and Port 1. • Hardware Information Displays the current IP phone platform and the revision number. • Firmware Information Displays information about the firmware that is currently installed on the IP phone. Information in this field includes Firmware Version, Firmware Release Code, Boot Version, Release Date/Time. • SIP Status Displays information about the SIP registration status of the phone. If there are accounts configured on the IP Phone, their SIP status displays in this field. The 6751i displays only one status line. All other model phones display the status of up to 9 lines. 41-001160-03, Rev 00, Releaes 2.4 IP Phone Administrator Guide Administrator Level Options The following table describes the status conditions that can display for an account(s). Status Condition Description Registered Displays this status on accounts that HAVE been registered with the SIP proxy server. Example: BackupRegistrar Line SIP Account Status Used? 1 9057604603@anasipproxy.aastra.com:5060Registered Yes where Account Number is “1” SIP Account is “9057604603@anasipproxy.aastra.com” on port “5060” Status is “Registered” Backup registrar is used (“Yes”) SIP Error Number Displays on accounts when registration fails with the SIP proxy server. Example: BackupRegistrar Line SIP Account Status Used? 4 9057604601@anasipproxy.aastra.com:5060401 No where Account Number is “4” SIP Account is “9057604601@anasipproxy.aastra.com” on port “5060” Status is “401” - Unregistered if SIP registration fails. Backup registrar is used (“No”) Note: The IP Phones can register with multiple server using the same user name. So the SIP Status information on the Network Status screen may display the same account with different registrar and proxy IP addresses. For more information, see 41-001160-03, Rev 00, Releaes 2.4 Administrator Options Administrator Level Options Restarting Your Phone As System Administrator, there may be times when you need to restart a phone. The Restart option allows you reboot the phone when required. A reset may be necessary when: • There is a change in your network, OR • To re-load modified configuration files, OR • If the settings for the IP phone on the IP PBX system have been modified. You can restart the phone using the IP Phone UI or the Aastra Web UI. Restarting the Phone Using the IP Phone UI IP Phone UI Step Action 1 Press the Options key on the phone to enter the Options List. 2 Select Restart Phone. 3 For 9143i. 6751i, 6753i: Press # to confirm. Note: To cancel the Restart, press the 3 key. For 9480i, 9480i CT, 6755i, 6757i, 6757i CT: Press Restart. Note: To cancel the Restart, press Cancel. 41-001160-03, Rev 00, Releaes 2.4 IP Phone Administrator Guide Administrator Level Options Restarting the Phone Using the Aastra Web UI Aastra Web UI 1 Click on Operation->Reset->Phone. 2 Click to restart the phone. 41-001160-03, Rev 00, Releaes 2.4 Administrator Options Administrator Level Options Set Phone to Factory Defaults/Erase Local Configuration You can set phones to their factory default setting or remove a local phone’s configuration using the IP Phone UI or the Aastra Web UI. Setting Factory Defaults on the Phone Factory default settings are the settings that reside on the phone after it has left the factory. The factory default settings on the phone sets the factory defaults for all of the settings in the aastra.cfg,
Telefoni con filo - 9480i CT Series (14.11 mb)
Telefoni con filo - 9480i Series (14.11 mb)