valutazioni - 3, GPA: 4
(
)
)
|
Facilità d'uso
When you disable this parameter (0 = disable), and there is an active call, the phone treats an incoming intercom call like a normal call and plays the call warning tone. An Administrator can set this parameter using the configuration files (sip intercom allow barge in) or the Aastra Web UI (Allow Barge In at Basic Settings->Preferences->Incoming Intercom Settings). A User can set this parameter using only the Aastra Web UI. Allow Barge In (in Web UI) (Default is enabled.) ENH06301 REFER-TO header now uses uppercase characters in escape codes. RN-001029-00, Release 2.0.2, Rev 02 SIP IP Phone Models 53i, 55i, 57i, 57i CT Release Notes Enhancements/Changes in 2.0.2, Build 1040 Issue Number Description of Feature/Enhancement ENH06372 Goodbye Cancels Incoming Call Feature A User and Administrator can now configure the Goodbye key to drop active calls or ignore incoming calls. A new parameter has been added (“goodbye cancels incoming call") which controls the behavior of the goodbye key when the phone is in an active call and a second call is presented to the phone. When you enable this parameter (1 = enable), which is the default, the Goodbye key rejects the incoming call. When you disable this parameter (0 = disable), the Goodbye key hangs up the existing call. If you disable this parameter, and the phone receives another call when an active call is already present, the 57i and 57i CT phones display softkey 1 as “answer” and softkey 2 as “ignore”. The 53i displays “ignore”. For the 53i, you must use the DOWN arrow key to ignore the call. An Administrator can set this parameter using the configuration files (goodbye cancels incoming call) or the Aastra Web UI (Goodbye Key Cancels Incoming Call at Basic Setting->Preferences->General). A User can set this parameter using only the Aastra Web UI. Goodbye Key Cancels Incoming Call (in Web UI) (Default is enabled.) RN-001029-00, Release 2.0.2, Rev 02 IP Phone Release Notes 2.0.2 Enhancements/Changes in 2.0.2, Build 1040 Issue Number Description of Feature/Enhancement ENH06544 53i: This model phone now has extended SPRE support. Phone Lock Softkey Feature A user or administrator can now lock a phone using a configured softkey or programmable key. Locking the phone prevents it from being used or configured. Once the phone is locked, the user or administrator can enter their password to unlock the phone. You can configure a “Lock/Unlock” softkey using the configuration files or the Aastra Web UI. In the configuration files, you enter “phonelock” for the type of softkey or programmable key. For example: softkey1 type: phonelock or prgkey1 type: phonelock In the Aastra Web UI, you can go to the following paths for each phone model and select “Phone Lock” from the Type options. 53i: Operation->Programmable Keys 55i: Operation->Programmable Keys, Operation->Sofkeys and XML 57i, 57i CT: Operation->Softkeys and XML Note: This feature is dynamic. When you configure this feature, it takes affect immediately and displays to the phone LCD. Once configured, you can press the LOCK softkey to lock the phone. The same softkey displays UNLOCK. After pressing UNLOCK, a password prompt appears. You must enter your user or administrator password to unlock the phone. RN-001029-00, Release 2.0.2, Rev 02 SIP IP Phone Models 53i, 55i, 57i, 57i CT Release Notes Enhancements/Changes in 2.0.2, Build 1040 Issue Number Description of Feature/Enhancement Speeddial Prefix Feature A user or administrator can now enter a prefix number for a speeddial softkey or programmable key. The normal function of the speeddial option allows you to dial a number quickly by pressing the softkey or programmable key. This speeddial feature now allows you to dial a preset string of numbers followed by a “+” when pressing the softkey or programmable key. You can use this feature for numbers that contain long prefixes. For example, if you had the following speeddial configuration in the configuration files: softkey2 type: speeddialsoftkey2 label: Europe Office softkey2 value: 1234567+ softkey2 line: 2 then, after you press softkey2 on the phone, it dials the prefix number automatically and pauses for you to enter the remaining phone number using the keypad on the phone. You can configure the speeddial prefix using the configuration files or the Aastra Web UI. In the configuration files, you must enter the prefix number, followed by a “+” in the “SoftkeyN Value” field or “PrgKeyN Value” field. For example: softkey2 value: 1234567+ prgkey2 value: 123456+ topsoftkey2 value: 123456+ expmod2 key20 value: 456789+ In the Aastra Web UI at the path Operation->Softkeys and XML or Operation->Programmable Keys, you must select the following: Type = speeddial Label =
Telefoni con filo - 55I (970.86 kb)
Telefoni con filo - 57I CT (970.86 kb)