valutazioni - 4, GPA: 4 ( )

Produttore : ClearSounds File Size : 224.48 kb File Nome : Lingua di insegnamento:

The IN/OUT key can include an extender to indicate the specific group that this key will affect. This means that if you are in multiple groups, you can decide for which groups you will receive calls. CUSTOMIZING KEYSET AME BGM This feature selects whether hear their personal greeting greeting. A BGM source must be selected for this to work. This feature only applies if there is a CADENCE card a programmed AME key. • While the handset is on-hook, press TRSF and then dial 110. • Press 091 to turn on AME BGM or 090 to turn it off. • Press TRSF to store your selection. AME PASSWORD This feature allows people using the AME feature to enable tion. This will prevent unauthorized people from listening to your messages being left. The passcode is the same as your station passcode. This feature only applies if there is a CADENCE card installed in the system and your a programmed AME key. • With the handset on-hook, press TRSF and then dial 110. • Dial 101 to turn on AME BGM or 100 to turn it off. • Press TRSF to store your selection. SELECT RING TONE Each keyset user can select any one of eight ring frequencies: • While on-hook, press TRSF and then dial 111. • Dial 1–8 or press the UP and DOWN keys to hear each tone. • When you hear the tone that you prefer, press TRSF to save it. NOTE: Specific lines or stations may be programmed to ring with a different tone than what you have selected for you keyset. CHANGE YOUR PASSCODE From the factory, your station passcode is 1234. You can change your station passcode whenever you desire. • While on-hook, press TRSF and then dial 101. • Dial your old passcode. • Dial a new passcode (must be four characters). You can use 0–9. • Redial the passcode verify. If successful, will hear beeps. Four beeps indicate • Press TRSF to store the new passcode. SET ANSWER You can receive internal calls in one of three modes Answering Intercom Callsunder Intercom Callsfor descriptions): • While on-hook, press TRSF and then dial 103. • Dial 0 for Ringing, 1 for Auto Answer or 2 for Voice Announce. • Press TRSF to store your selection. NOTE: When your keyset is programmed for Auto Answer and you have Forward No Answer (FNA) turned on, you must answer ANS/RLS or the MONITOR key if you are using a 7B phone before your FNA timer expires or the call will forward. AUTOMATIC HOLD While on an outside call, pressing a line key, route key or a flashing CALL button will automatically put your call on hold and connect you to This feature can be turned on or off at your keyset. • With the handset on-hook, press TRSF and then dial 110. • Dial 001 to turn Automatic Hold on or 000 to turn it off. • Press TRSF to store your selection. NOTE: Intercom calls can only be automatically put on hold by pressing TRSF. HEADSET OPERATION Keyset users can switch between headset mode and handset mode. When using headset mode, press the ANS/RLS or the MONITOR key if you are using a 7B phone to answer and release calls. • With the handset on-hook, press TRSF and then dial 110. • Dial 021 to use the headset or 020 to use the handset. • Press TRSF to store your selection. Your keyset may be equipped with a Headset mode key. If it is so equipped pressing this key while the light is out will cause the keyset to enter headset mode and the light will illuminate to indicate this. Pressing the key while the light is lit will cause the keyset to return to handset mode and the light will go out. HOT KEYPAD On the DCS 400si, keyset’s keypad can be made “ live” or “ hot” so that it is not necessary to lift the handset SPK or the MONITOR key before you begin dialing. Calls can C. O. line number, trunk group access code, intercom number or feature access code. To activate this feature: • With the handset on-hook, press TRSF and then dial 110. • Dial 031 to turn the Hot Keypad on or 030 to turn it off. • Press TRSF to store your selection. KEY CONFIRMATION TONE You can hear a short beep (confirmation tone) each time you press a button on the dial pad. This tone can be turned on or off. • While on-hook, press TRSF and then dial 110. • Dial 040 to turn tones off or 041 to turn tones on. • Press TRSF to store your selection. REJOINING A PAGE This feature allows you to hear the remaining portion of an ongoing internal page after you return your keyset to idle. To enable this feature: • With the handset on-hook, press TRSF and then dial 110. • Dial 051 to turn this feature on or 050 to turn it off. • Press TRSF to store your selection. RING PREFERENCE This feature automatically answers ringing calls when you lift the handset or press the ANS/RLS or the MONITOR key if you are using a 7B phone. This method will always answer calls in the order they arrived at your keyset. When you turn ring preference off, you must press the flashing button to answer a call, allowing you to answer calls in the order you choose. • With the handset on-hook, press TRSF and then dial 110. • Dial 061 to turn ring preference on or 060 to turn it off. • Press TRSF to sto...

Scarica la tua

Per scaricare, digitare 2 cifre :