valutazioni - 2, GPA: 5
(
)
)
|
Facilità d'uso
The switch-contact arrangement is form “C” (SPDT) and is wired as form“A” (SPST). Configuration is ideal for use in relay-control, pushto- call, and a variety of other switch, communication, and signaling applications. It is available on CE-2A and DP-1A by adding a (-PT) suffix. DY-1 DYNAMIC TRANSMITTER This accessory is designed for installations in which the telephone handset would be used as a paging microphone. The dynamic transmitter is the low-impedance type suitable for input to the Lo-Z microphone input of the amplifier. Assembly replaces the carbon transmitter with a moving coil (dynamic, 500 ohms @ 1KHz with a response of 250-5000Hz) transmitter that has an impedance of 500 ohms @ 1 kHz. ACCESSORIES & REPLACEMENT PARTS FOR CE SERIES AND MODEL DP-1A MODEL DESCRIPTION COLOR WEIGHT RU-1 Receiver -.5Lb. (.2 kg.) TU-1 Transmitter -1.5 Lbs. (.7 kg.) DY-1 Dynamic Transmitter -1 Lb. (.4 kg.) CEK-1A Cord Neutral .5Lbs. (.2 kg.) TELEPHONE POWER SUPPLY FOR COMMON-TALK SYSTEMS TPS24-05 The TPS24-05 is a combination 24 VDC / TALK voltage power supply, engineered to power most common-talk telephone intercom systems. (See SL5-1425 on DC power supplies and SL8-1433 for common-talk telephone intercom applications.) Black epoxy finish with a 6’ power cord. INPUT OUTPUT RIPPLE REGULATION DIMENSIONS WEIGHT (Nominal) (Talk Voltage) (0-Full Load) L x H x D 117 VAC, 24 VDC @ .5 mV & TALK 500 mV 63.4" x 35.8" x 2" 3.0 Lbs. @ 60 Hz, 26 Watts 1/2 amp voltage output (171 x 92 x 51 mm) (1.4 kg) INPUT IMP. OUTPUT IMP. FREQUENCY RESP. DIMENSIONS WEIGHT 600 Ohms 600, 10K, 60Hz-12KHz 47.8" W x 31.8" H x 13.4" D 2.5 Lbs. 25K Ohms (124 x 80 x 44mm) (1.1 kg) 600-OHM IMPEDANCE MATCHING TRANSFORMER LT600-VC Versatile unit matches line level, 600-ohm line circuits with HI-Z circuits. It can also be used as a 600-ohm to 600-ohm isolation transformer. Recommended for coupling of line level audio or common-talk phones into amplified sound systems, background music and paging systems, recording equipment, or studio electronics. Built-in potentiometer provides optional adjustability for the 25K output level. The 600-ohm input may be matched to 600, 10K, and 25K- ohm circuits. All components are mounted on a printed circuit board. Steel chassis includes mounting ears and “insta-mount” tape. Transformer is shielded to minimize induced hum. Unit includes a phono jack on the output side for convenient connection to amplifier or other equip- ment circuitry. Jack can be connected to various transformer taps via barrier strip jumper. (Factory-installed jumper connects jack to potentiometer output.) LT600-VC SCHEMATIC CIRCUIT BOARD Specifications subject to change without notice 1601 JACK MCKAY BLVD. / ENNIS, TEXAS 75119 U.S.A. / TELEPHONE: (800) 876-3333 / FAX (800) 765-3435 © 2001 Atlas Sound LP Printed in U.S.A. 000501 SL8-1434 ...
Questo manuale è adatto anche per i modelli :Telefoni con filo - DP-1A (56.93 kb)
Telefoni con filo - DT (56.93 kb)
Telefoni con filo - DY (56.93 kb)
Telefoni con filo - TPS24-05 (56.93 kb)