valutazioni - 4, GPA: 4
(
)
)
|
Facilità d'uso
iSimple® A Division of AAMP of America™ 13190 56th Court Clearwater, FL 33760Ph. 866-788-4237support@isimplesolutions.com ©2010 AAMP of Florida, Inc. add iPod® add iPod® Mazda Owner’s Manual Media Gateway PXAMG PGHMZ1 Owner’s Manual Media Gateway PXAMG iSimple®, a division of AAMP of America™ 13160 56th Court Clearwater, Florida 33760 Ph. 866-788-4237 support@peripheralelectronics.com ©2007 AAMP of Florida, Inc. 12-27-10 INST036 Table of Contents Pages 1. Introduction 2 2. Precautions 2 3. Compatibility Notes 3 4. Dipswitch Settings 3 5. Installation 4 6. iPod Operation 5-6 7. HD Radio Operation (if equipped) 6 8. Selecting Sirius Input or Factory Sirius(if equipped) 7 9. Selecting AUX Input 7 10. CX-9 & Mazda 6 Mid-line Operation 8 11. Troubleshooting 9 12. Warranty Info 10 iSimple®, a division of AAMP of America™ 13190 56th Court Clearwater, Florida 33760 Ph. 800-477-2267 ext. 230 support@isimplesolutions.com ©2010 AAMP of Florida, Inc. 1 Media Gateway & Optional Add-ons *The Media Gateway will only support 2 inputs. Factory Radio Not Included Harness Connection. Port 1.Port 2.Dip Switches(See Manual).USB. Media Gateway Harness Part #: PGHMZ1 iPod Not Included Media Gateway Part #: PXAMG ISSR11 Cable (sold separately) 11Ft. iPod Cable 3Ft. HD Radio Cable HD RadioTM Tuner (sold separately) Part #: HDRT 2 1. Introduction Thank you for purchasing the iSimple® Media Gateway. The Media Gateway is designed to provide endless hours of listening pleasure from your factory radio. To ensure that your iPod performs correctly with your radio, we recommend that you read this entire manual before attempting installation of the Media Gateway. The Media Gateway allows connectivity for iPod, Sirius Satellite Radio tuner (SCC1 sold seperately) and the HD Radio tuner (HDRT sold separately), enabling full control of these devices from the factory installed radio. It also retains original system features such as satellite radio and rear seat entertainment (if equipped). 2. Precautions UPDATING iPod FIRMWARE For proper operation of the Media Gateway, your iPod must be updated with the most recent version of firmware from Apple. This is done on your computer. To update the software on the iPod go to: Follow the directions on the website to complete the download. There is no charge for this update. PREVENTING DAMAGE TO YOUR VEHICLE OR iPod. To eliminate the risk of an electrical short, we recommend disconnecting the vehicle’s battery prior to installation. If you do not feel comfortable making these connections, we suggest you seek professional installation. We recommend that the iPod be disconnected from the interface when the vehicle is not in use. PROPER MOUNTING LOCATION Securely install the interface in a location free from; heat, humidity, moving parts, sharp metal edges or direct sunlight. We recommend securing the interface to a suitable location using; double sided tape, VelcroTM or zip-ties. 3. Compatibility Notes Radio MUST have a button labeled “SAT”. This indicates that the radio is satellite ready. Please visit for the most up to date application information and to verify your vehicle’s compatibility. 4. Dipswitch Settings Mazda 3 with BOSE Mazda 6 Non-Navigation Mazda CX-9 with Navigation & *Mid-Line Radio Mazda 6 with Navigation & *Mid-Line Radio All Other Vehicles *The Mid-Line Radio will have a small color LCD in the middle of the face of the radio and will not have a seperate text display. 5. Installation 1. When making electrical connections it is always recommended that the vehicle’s battery be disconnected from the electrical system before performing the installation. 2. Carefully remove the trim panels covering the screws that secure the radio into the dash cavity. Remove these screws and carefully pull the radio from the dash of the vehicle. This will provide access to the factory radio connectors where you will connect the Media Gateway harness. 3. Disconnect the factory 24-pin & 16-Pin harness (if present) from the back of the radio. Disconnect the antenna from the radio. 4. Connect the 8-Pin iPod docking cable into the first port on the Media Gateway (farthest away from dipswitches). Carefully run the 11 foot iPod cable behind the dash to the location where the iPod will be mounted or stored (for example the glove box or center console). This location will vary based on the vehicle, and the customer’s prefrence. When running this cable through the dash be sure to secure it away from moving parts or sharp metal edges that may damage the cable. 5. If connecting the HD Radio Tuner (HDRT sold separartely), make the folllowing connections before connecting the PXAMG to the vehichle. Plug the 3 foot HD Radio Cable (8-Pin mini-din to 8-Pin mini-din) cable into the second port (closest to the dipswitches) on the Media Gateway. Connect the other end of this cable into the HD Radio tuner. Connect the factory antenna cable into...