valutazioni - 3, GPA: 4.3
(
)
)
|
Facilità d'uso
Access Procedure: 1. Dial your phone number 2. Wait for the Answering Machine to pick up and issue the tone. Enter the security code. The DEFAULT CODE is 1 2 3. (The security code can be changed by the user. See section Security ID on page 39) 3. The menu will announce the following: Press Two to Play Messages, Press Two again to Stop Press Zero while playing a Message to Erase Press One to Review Press Three to Skip Press Four to Turn OFF/ON Press Seven to Review Menu Again Bypass the Outgoing Message Press any number after the announcement starts.The outgoing message will be bypassed, and a tone will be heard. The caller will be able to leave a message or enter the security code. Remote ON while Answering Machine is OFF If the Answering Machine is OFF, it will automatically answer on the 10th ring and announces “TAM off.” Wait 7 seconds to enter the security ID. The answering machine can be turned ON by pressing key four (4) after the security code is entered. TELEPHONE OPERATIONS Memory is full If the answering machine memory is full, the answering machine will answer on the 10th ring and announce “Memory Full.” Wait seven (7) seconds to enter the security code. Recording and playing memos Memos are self-recorded messages. For example, a reminder to yourself or a message for someone else in your household. The memos can be saved, played back and deleted like incoming messages. Recording Memos Select Memo from the Message Menu. 12:09Select Exit 04/06AM3: Skip 4: Answer ON/OFF 5: Memo MENU It will automatically start recording. After a memo is recorded, press the (soft key) End. This will save the memo. The TALK button will then flash displaying a new MEMO (message). Note: Memos reduce the overall recording time available on the answering machine. 12:09End Exit 04/06AMRecording Memo TROUBLESHOOTING The unit will not operate / no dial tone: • Verify the AC Adapter is securely plugged into AC outlet, the base and the telephone. • Verify the telephone line cord is securely plugged into the wall jack and the telephone. • Make sure the battery has been placed in the battery compart- ment correctly. (The circular metal contacts on battery need to touch the metal springs inside battery compartment.) • Make sure the handset battery is fully charged. • Verify the telephone is in the correct dialing mode tone (touch) or pulse (rotary). • Make sure you are in the usable range of the base station. The phone does not ring when you receive a call: • Make sure the RINGER switch on the handset and base are set to ON. • Verify the AC Adapter is securely plugged into the AC outlet, the base and the telephone. • Verify the telephone line cord is securely plugged into the wall jack and the telephone. • Make sure you are within the usable range of the base station. • You may have too many extensions on your line.Try unplugging a few devices. Noise, Static, Interference or Other Calls Heard while Using the Handset: • Make sure you are within the usable range of the base station. • Make sure the handset battery is fully charged. • Try relocating the base unit to another location. • Make sure the AC Adapter is not plugged into the wall outlet with other appliances. TROUBLESHOOTING Phone Will Not Hold Charge: • Make sure the charging contacts on the handset and base are free of dust and dirt.While unplugged, clean the contacts with a soft cloth. • Make sure CHARGE LED on the base is lit when the handset is in the cradle. • Handset battery may have developed a memory, due to user improperly charging, and may need to be replaced. (Battery must be charged a full 12 hours before the first use.) Difficulty in Placing or Receiving Calls: • Move closer to the base and try again. • Make sure you have selected the correct dialing mode, tone or pulse. • Make sure the AC Adapter is not plugged into a wall outlet with other appliances. Disconnect for 5-10 seconds then reconnect. Place the handset back on the base and reinsert the AC Adapter. • Make sure the handset battery is fully charged. Your handset screen is showing Out of Range • Move closer to the base. • Place the handset into the base until the screen displays: “Handset Registered.” It will take approximately 5-10 seconds for the handset to register to the base. • Handset may need to be re-registered to the base manually. First, select INITIAL SETUP on the main menu. Second, select REGISTRATION on the sub-menu.The screen will then display “Please hold the page button until beep.” This will register your handset to the base.The screen will then display the handset number. TECHNICAL SPECIFICATIONS General Model Number: C4230 Frequency: 5.8 GHz Amplification: 50 dB Handset Unit Product in Inches: (L x W x H): 7.25 x 2 x 1.25 Weight in Pounds: 0.5 lb. Base Product in Inches: (L x W x H): 7 x 7 .75 x 4.75 Weight in Pounds: 1.0 lb. Power Supply: AC Adaptor (Input: 120V AC, 60 Hz; Output: 9V DC, 500mA) Handset and Base Product in Inches: (L x W x H): 7.80 x 5.25 x 5.75 Weight in Pounds: 1.5...